Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
February 17, 2018
The unit powers on but the time indication does not change, it shows eco mode and the unit will not start. Error code is e91. I believe this is a control board issue. What are your thoughts?
For model number EFME617STT0
Hello Michael,
Thanks for your question. The E91 code indicates a communication error between the control boards on your unit. You may wish to check the wiring between them and see if anything is loose - otherwise, consider replacing the main control board.
I hope this helps.
Washer shuts off occasionally and powers off. Unplug unit and it may power back up. Door switch is good. Display starts flashing random minutes. Is the board faulty
For model number EFLS617STT0
Hello Mike, thank you for reaching out. Based on our understanding of the issue, we would suggest checking the control board, part number PS11766138, to solve the problem. Glad to be of assistance!
I was getting an EF1 message now when I press the start pause button in beeps but the cancel lights up as well and the start phase just blinks
For model number EFME617STTO
Hello Trevor, thank you for your inquiry. On the Electrolux Dryer, the EF1 message indicates that the vents are clogged. Please look for any blockages in both inner and outer vent hoses. If no clogs are found then the thermal fuse (part number: PS2349395) is likely to be defective and you might need to replace it. Glad to be of assistance!
Error E HD. I cannot find a lot about this error message on this Electrolux driver but I read it could be the board assembly? Does this make sense. Thanks.
For model number EFMC617STT0
Hello Jo, thank you for contacting us. Yes, the issue is most probably related to the control board, part number PS11766140. We would recommend resetting the appliance and seeing if it helps. If this does not help, replacing the board is the most likely solution. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
E42 error code, checked door switch and it makes and breaks contact. Which control board would I need to change?
For model number EFME617STT0
Hello Brian, thank you for your inquiry. Based on our research, you need to replace the main control board, part number PS11766140, to fix this issue. Before replacing the main control board, we recommend checking the door switch, part number PS2330879, and door latch, part number PS11759825. If the door switch and door latch are good, the main control board will need to be replaced. Thank you for the inquiry, good luck with the repair!
Im getting a 5E error code on my electrolux washer. Does that mean its a bad control board?
For model number EFLS517STTO
Hi Matt, thank you for getting in touch. Based on our research, if your error code is E5E, it means there is a communication error between the main control board and the motor control board. We would recommend checking the wire harness between the motor control board and the main control board. If the wire harness is fine, you may need to replace the motor control board, part number PS11766139, to fix the issue. We hope that helps!
