Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
December 5, 2019
My refrigerator would intermittently stop working. There is still power on the door selections, but water/ice dispenser would not work, the internal LED lights would not come on, and the refrigerator stopped cooling. I would have to unplug the power for 15 minutes and plug it back in for it to work again (for a couple of weeks). Would you be able to recommend which board I would need to change out for these symptoms?
For model number KRMF706ESS01
Hi David,
Thank you for your question. There are 3 electronic control boards that you will need to check. You will need to check the main electronic control board, part number PS11757074, the power supply board, part number PS11756815, and the inverter board, part number PS12070625. You will need to check them for signs of damage or burn marks to determine which one is causing the issue. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Florencio
January 5, 2023
My refrigerator builds too much ice on the freezer are and fan motor starts making lots of noise, and eventually stops working, and a op error appears on panel. I test the defroster and it does not get's hot?
I test the continuity with multi meter is the heater element is ok.
Which of the board controls this heater element?
For model number KRMF706ESS01
Hello Florencio, thank you for your question. The part we believe your are searching for is Electronic Control Board PS11757074. We look forward to hearing from you.
Refrigerator started out with a pf code but now is po and beeping every few minutes. Confirm doesnt change it, unplugged for reset and it comes back again. The refrigerator and freezer are still cooling, just the beeping and po code... to many control boards on here...lol. which one do you think? jasper
For model number krmf706ess01
Hello Jasper, thank you for your question. We would recommend replacing these boards. They can both cause that PO error code. PartSelect Number: PS11756815 and PartSelect Number PS11737802. I hope this helps!
Ok...i have replaced both the electronics control card and the power supply card on my KitchenAid french door refrigerator. it still beeps and flashed po on the display ever 8 minutes. the freezer no longer freezes as well. this refrigerator is 2 years old. what should i replace now? the beeping is about to drive me crazy.
For model number Kitchenaid #KRMF706ESS01
Hello Stan, thank you for your question. Per the model number, the two boards on the back of the unit should have fixed the issue. I was able to find some other information from other customers online
I plugged it in and left one door open and recorded the rebooting issue. Then I decided to record a video of me pushing the measured fill button. After pushing the measured fill button for a second time, the refrigerator stayed on and is working. So perhaps holding the two buttons resolved the issue or reset something so the refrigerator could work.
Try holding one door open and pressing the measured fill button twice to reset the unit. If this doesn't help. you may require a service call. I hope this helps.
Was this helpful?
Thank you for voting!
Brian
November 16, 2019
I'm not sure which control board i need to replace. The refrigerator shuts down completely and i can hear a clicking about every second. Either w10624574 or w10811365.
For model number KRMF706ESS01
Hello Brian, thank you for your question. We would recommend replacing these boards. They can both cause that symptom. PartSelect Number: PS11756815 and PartSelect Number PS11737802. I hope this helps.
Every so often the water stops working door sensor doesn’t work and now fridge won’t stop running down to 22 degrees. I replaced main board and see i have 2 more which one is next
For model number Krmf706ess00
Hi David,
Thank you for your question. From what you described, you will need to check the dispenser control board, the micro switch in the dispenser and you will need to check the thermistor. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Chris
March 6, 2019
Looking for produce drawer temp select control board
For model number KRMF606ESS00
Hello Chris, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS11757397. Thank you for your inquiry, good luck with this repair!
What is main function of this board(partselect number ps11756815)? Is this the main control board for krmf706ess01? Thanks
For model number KRMF706ESS01
Hi Gary, thank you for your question. This board is the power supply board. I have listed the main control board down below for you. I hope that helps. Good luck with your repair.
THE SENSORS LIGHT DOSE NOT COME ON WHEN ICE TRAY IS IN PLACE DOSE NOT MAKE ICE WHAT CAN BE WRONG
For model number WRV986FDEM01
Hey Floyd, thank you for your inquiry. We have researched your model and found that if your ice maker is not making ice and the sensor light does not come on then you may need to replace its Receiver Control Board, part number PS11769410. We hope this helps!
My refrigerator compressor shuts off randomly. If I unplug it and plug it back in it will work for a day or two but then it shuts off again. Should I replace the main board or the power supply board?
For model number WVR986FDDEM01
Hello Louis, thank you for contacting us. According to our research, the issue is probably with the power supply board, part number PS11756815. It activates and operates components such as the compressor and fans to keep the refrigerator cool. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
