Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ben
October 9, 2017
Microwave beeps randomly when not in use and display switches to cook method.Not sure if I need part 7 or part 4 on the door diagram.
For model number KHMS2050SSS2
Hi Ben, Thank you for the great question. I recommend replacing the Part Number PS11745311. This board controls the function and the beeping you are hearing. When defective it will act as if the appliance is pressing its own buttons and will start on its own.Good luck with the repair!
The unit started beeping randomly when not in use and then stopped responding to touch commands. Replaced the control unit based on similar comments and recommendation, it still is not responding to touch commands, could it be the computer unit behind the control panel?
For model number KHMS2050SSS2
Hi John, Thank you for the question. Yes the next thing to replace is the Control Board, PartSelect Number PS11745307. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Scott
August 30, 2019
Got an error code of f2.H2 on the display. Unplugged the unit, waited a minute or so, then plugged it in again (several times). The unit displays the same message and "beeps" rapidly 5 or so times. Some sites suggest it's the control board...
For model number Kitchenaid KHMS2056SSS-3
Hello Scott, thank you for writing. This is most likely due to a stuck key on the Microwave Keypad, part number PS11745311 for your model. You may also want to consider the Electronic Control Board part number PS11754301 as the cause. Good luck with your repair!
Was this helpful?
Thank you for voting!
Robert
November 11, 2021
Do you have any instructions on how to disassemble door in order to replace control panel?
For model number KHMS2050SSS2
Hello Robert, Thank you for the question. We do not have instructions for this particular model sorry but we do have some basic steps that should help. First unplug the appliance, use a putty knife to carefully pry away the inner door frame (door choke), and the door valance, be careful the door glass does not fall, the control panel cover is next then you can access the control panel, wire harnesses. Take pickers as you go for reassembly. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11754098
Manufacturer Part Number: WPW10391271