This part is a replacement glass cooking tray for your microwave. The cooking tray rotates when the microwave is running, and helps your food cook evenly. As it is made of glass, these glass cooking t...
This door interlock switch is for microwaves.
Door interlock switch prevents the microwave from starting when the door is open.
Because the microwave shielding and interlock switches must be pro...
Also known as the coupler. This driver is located directly under the glass turntable, and over the motor. This part helps the glass turntable to rotate.
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Linda
October 12, 2022
Microwave is making beeping noises randomly while not being used. Also touch screen changes randomly again while not being used. Turns off during cooking before time is up. Doesn’t heat according to what’s been programmed. Not sure if it’s worth having someone look at. Bought from Sears 10 years ago. What do you think? Any feedback would be appreciated. Thanks!
For model number KHMS2056SSS3
Hi Linda, thank you for reaching out. According to our research on the model, the control board appears to be faulty and you may need to replace it with part number PS11745307. If you need help placing an order, customer service is available 7 days a week. Glad to be of help!
Hello Joseph, Thank you for your inquiry. The F7 Error code indicates that power to the magnetron was interrupted. We would recommend checking the magnetron, the inverter, the magnetron thermistor, and the 3 door switches. For safety reasons, since the microwave capacitor can still store electricity even when the microwave is unplugged, it is usually advised that you discharge the capacitor before any attempt at repair. We have included a link on how to do so.
https://www.partselect.com/Microwave+discharge-capacitor+repair.htm Good luck with your repair.
There was no "fixing" per say but we still could not use the microwave without the plate. This has to be one of the biggest plates for a microwave. We ordered this through your company and we had it three days later. THREE DAYS! We had expected anywhere from 1-2 weeks. My husband was so impressed he bookmarked your site for future reference. Thank you for being so efficient and prompt. The glass turntable fit like a glove! Sincerely, Mark and Lia Hammond
By pulling the filter screens units down and out with a pair of pliers I had access to the surface lights. Pulled the lights out of their sockets and replaced the bulbs. Real easy. Since the filter units were out, replaced the filters and reinstalled the filter units. The whole operation took less than 15 minutes.
Remove the filters and use a Torx driver to remove two screws holding the motor. The wires on on the motor are held in place by a plastic clamp that must be pried open on one side. That's all it takes to replace the drive motor. Everything else that makes the turntable spin lifts off from inside the microwave.