The replacement ice maker does not include a new ice level arm, or wire harness, these components will need to be reused from original ice maker.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Ice maker won’t dispense ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Maytag, Kenmore, Kenmore.
Part# WPW10300022 replaces these:
AP6019085, W10122556, W10300022, W10377190
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.7
Filter By Rating:
5 Stars
2
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David P - September 2, 2022
Verified Purchase
Great Part
All went well. Thank You
★★★★★
★★★★★
Michael H - April 1, 2023
Verified Purchase
Works great
Easy replacement and works great
★★★★★
★★★★★
Kelly F - January 23, 2019
Verified Purchase
Replacement Ice maker
Part arrived the next day and worked perfect
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The ice maker had a internal brownish leak substance. This in turn dripped on the ice in the tray, which froze the ice cubes in a ball which would not let the ice to be ejected from the dispenser, and in turn cracked the tray which holds the ice cubes, so I had to replace the tray and ice maker.
On a side by side refer, you need both doors open to unscrew the three 1/4 inch screws, 1. Remove the ice tray 2.the ice arm needs to be in the up position, so no water will flow while dissembling. 3. Remove the two top screws, 4. While holding the ice maker with o e hand, remove the bottom screw. Balance the ice maker and unplug the ice make electric plug in the rear of the ice maker. 5. Take the I e maker out. 6. The ice maker does not come with the ice arm, so you need to remove the arm from the old or broken ice maker and install it in the new ice maker. 7. Resemble in reverse order.
I did not unplug the refer from the wall socket, you may want to do this. It recommended but I did not. There you go.
Unplugged freezer turned off water removed 3 nut screws Unplugged old ice maker installed new ice maker
Other Parts Used:
Clifford from WASHINGTON, DC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No ice making.
Took old ice maker out; put in new ice maker.
Other Parts Used:
Joseph from EDEN, NC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker stopped working. Would not eject ice.
Repair was straightforward. Loosen two screws, remove and reuse one screw. Side by side freezer made it a cramped work space.
Other Parts Used:
Daniel from OCONOMOWOC, WI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
21 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Errol Pride
August 14, 2017
How do you restart the icemaker?
Hello Errol, that is a great question. You can reset it by unplugging the fridge for a few minutes, this will reset the ice maker control board. Allow 24 hours for it to make ice after that. Hope this helps!
15 people found this helpful.
Was this helpful?
Thank you for voting!
John
December 19, 2017
I have a Maytag refrigerator with ice maker model w10300022. How do i adjust the fill level on the ice maker?
For model number W10300022
Hi John,
Thank you for your question. You will have to pop off the white motor cover on your ice maker. On the right hand side while looking at the motor, you will see a small white plastic screw. Turning it clockwise would decrease the water level and counter clock wise would increase the water level. I hope that helps. Good luck with your repair.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Garry Rouner
November 28, 2018
When the ice maker fills up the water keeps running and runs over into the ice tray and i end up with big frozen chunks of ice in the tray that i end up throwing away in the sink. What is the reason for the water not shutting off like it's supposed too.Thank you
For model number WRS322FDAM04
Hello Gary, thank you for your question. The first part we would suggest testing/replacing is the water valve. The water valve brings water to the ice maker and may not be shutting off which would allow water to continue to flow into the icemaker. The part number for the valve is PS11749668. Here is a link that can help you test that part.
https://www.partselect.com/Refrigerator+test-water-valve+repair.htm
I hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
November 9, 2017
My ice maker stopped making ice. Is this repairable or needs reset? About how much to repair. Thank you
For model number MSD2576VEM00
Hi Gary,
Thank you for your question. It could be your ice maker. I would also suggest just taking a quick multi meter test of your water inlet valve as well. That part has two solenoids and one is for the ice maker specifically. So it never hurts to check that part just in case. If your valve is fine then you would need to replace your ice maker. The price of the ice maker is above in the part information for you. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
January 16, 2020
Is this a complete unit?
For model number Wrs321sdhz00
Hello, Thank you for your question. This will be a whole ice maker assembly. However the ice level arm, or wire harness are not included. We hope this helps, good luck with this repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
September 21, 2022
After turning off Icemaker it stopped making ice after turning back on.Is it the Icemaker or water valve?
For model number MSD2572VEB00
Hello Bill, Thank you for your inquiry. It could be an issue with either part. We have included a link to our video on how to test the water inlet valve with a multimeter and how to test the ice maker. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Linda Vydra
July 23, 2019
The plastic part of the ice bin busted. It appears the entire unit that makes the ice and stores the ice is one unit. I need to get a replacement for this entire unit. Kenmore side by side refrigerator. Model 10651793412.
For model number 10651793412
Hello Linda, thank you for inquiring. This Replacement Ice Maker part number PS11752389 is the correct replacement for your model.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joyce
October 28, 2019
I have replace my ice maker but it still does not allow water to come in, so no cubes...what else can i do?
Hello Joyce, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the appliance. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Charles
February 2, 2018
My ice maker will no quit dispensing ice i've unplugged the wire inside freezer compartment to stop motor from running. What control board do i need ?
For model number MSD2274VEM00
Hi Charles,
Thank you for your question. You would have to likely replace your ice maker. It is the ice maker bail arm that connects to the control in the ice maker and lets it know when and when not to make ice. So if your arm is fine then it is the control in the ice maker you need to replace. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kenneth
November 6, 2018
I think the heating element on the ice maker isn't working, the arms are having a hard time pushing the ice out of the mold. And it take for ever to fill the bucket. Can i just buy the heating element? Or is it time to buy a new ice maker?
For model number asd2575brwo1
Hi Kenneth,
Thank you for your question. You can purchase the ice mold and heater assembly separately from the ice maker. The part number listed under your model number for the ice mold and heater assembly is PS11752392. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11752389
Manufacturer Part Number: WPW10300022
