10650029213 Kenmore Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Lower Door Closing Cam – Part Number: WP2182179
$15.31
In Stock
Refrigerator Lower Door Closing Cam
★★★★★
★★★★★
(29)
Part #WP2182179
The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side or the freezer side. It helps hold the door open. This cam is made out of plastic, so it might crack or wear down over time. If your door will not open and close properly you may need to replace the door closing cam. To successfully install this part, you will need a 5/16 nut driver and a small flat blade screwdriver. Before you begin, unplug your appliance and disconnect the water supply. Lubricating this part may help with installation. This replacement part is sold individually. This part will fit both the left and right side of your refrigerator door. To make the repair, remove the top hinge cover, then the top hinge support. Lift the door from the bottom support and remove the old door cams. Replace the cams, using a little lubricant if necessary, and place the door back on the lower hinge support. Replace the top hinge support and your repair is complete!
Refrigerator Door Shelf Bin -  White – Part Number: WP2187172
$52.46
In Stock
Refrigerator Door Shelf Bin - White
★★★★★
★★★★★
(22)
Part #WP2187172
This refrigerator door shelf bin, also known as the door bin, or sometimes just a "bucket", is an authentic manufacturer-certified part made of white plastic and is easy to install. It is used to hold items in the fridge door, like jars, cans, and bottles, and you'll be able to visually see if the part is broken or warped. This particular shelf attaches directly to the fridge door; you should be able to pull out the old bin and snap the new one into place by observing the slots and pushing the bin down into them. You can check if this model is right for your appliance by checking your user manual and model number. The door bin measures about 18 inches wide, 4.5 inches high, by 7 inches deep. This door shelf bin is sold individually, so if your refrigerator takes multiple bins, which many do, you will need to order the appropriate amount of bins.
Refrigerator Ice and Water Filter – Part Number: EDR1RXD1
$69.99
In Stock
Refrigerator Ice and Water Filter
★★★★★
★★★★★
(18)
Part #EDR1RXD1
The EDR1RXD1 water filter uses advanced filtration technology to reduce over 20 types of contaminants, including pharmaceuticals, pesticides, and lead. Certified to meet NSF/ANSI standards, it delivers a 200-gallon capacity and is compatible with select refrigerator models for seamless replacement.
Refrigerator Crisper Drawer With Handle – Part Number: WP2188664
$108.53
In Stock
Refrigerator Crisper Drawer With Handle
★★★★★
★★★★★
(39)
Part #WP2188664
This OEM, clear convertible meat drawer can be used to store meats or vegetables and is designed for the lower portion of your refrigerator, generally. It has its own cold air duct to allow cold air from the freezer to flow into the drawer. You could have a broken or faulty drawer if you find that the food is kept within is spoiling or drying out quickly. The drawer should slide open and closed with ease. If your drawer will not easily slide open or closed, check the tracks that the drawer slides on. If the tracks are not damaged, the drawer itself could be at fault and should be replaced. Inspect it for visible damage like cracking or warping, which should be obvious. This part measures approximately 16 7/16 inches wide x 14 5/16 inches deep x 7 5/8 inches high and is a genuine OEM replacement part. It is sold individually. Note that there are several different types and options for the lower vegetable and meat drawers for your refrigerator, and you should check your user manual carefully to ensure that this is the drawer you are looking for.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Refrigerator Bimetal Defrost Thermostat – Part Number: WPW10225581
$48.43
In Stock
Refrigerator Bimetal Defrost Thermostat
★★★★★
★★★★★
(18)
Part #WPW10225581
If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.
Refrigerator Slide-Out Shelf with Glass – Part Number: WPW10276348
$282.57
On Order
Refrigerator Slide-Out Shelf with Glass
★★★★★
★★★★★
(16)
Part #WPW10276348
This OEM glass shelf assembly is designed for use in a variety of refrigerator models, offering reliable support and visibility for stored food items. It features a sturdy white plastic frame measuring approximately 18 inches in length and 18 inches in width, with an integrated glass pane that provides a smooth, easy-to-clean surface. The shelf is intended to replace cracked, shattered, or weakened components that no longer support weight effectively. Installation is simple and tool-free: remove the existing shelf by sliding it out of the interior grooves, then align and insert the new shelf into the same position. This part is sold individually and does not include additional accessories.
Refrigerator Compressor Start Relay – Part Number: WPW10197428
$89.81
In Stock
Refrigerator Compressor Start Relay
★★★★★
★★★★★
(18)
Part #WPW10197428
This compressor start relay is for refrigerators. The compressor start relay attaches to the compressor and helps start the compressor motor. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part.
Refrigerator Screw – Part Number: WPW10661886
$17.45
In Stock
Refrigerator Screw
★★★★★
★★★★★
(2)
Part #WPW10661886
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help solve the issue. Replacing this part is easy and requires minimal disassembly of the refrigerator end cap handle. Your will need a screwdriver to complete this repair.
Evaporator Fan Blade – Part Number: WP2169142
$41.53
In Stock
Evaporator Fan Blade
★★★★★
★★★★★
(2)
Part #WP2169142
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part. Please be sure to disconnect the power to your refrigerator before starting your repair.
Screw – Part Number: WP489483
$17.55
In Stock
Screw
Part #WP489483
This screw is sold individually.
Refrigerator Screw – Part Number: WP489497
$17.55
In Stock
Refrigerator Screw
Part #WP489497
Sold individually.

Questions And Answers for 10650029213

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patsy - For model number 10650029213
January 30, 2025
Is there a replacement for the filter door
Chris Boyle Profile
Hello Patsy, Thank you for writing. The Filter Door is only sold as part of the Filter housing PartSelect #: PS11759606. The Door is not sold on its own. We hope this information helps!
$160.43
On Order
Water Filter Housing - Black
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Keila - For model number 10650029213
February 21, 2020
Is there a replacent tray for the door where the ice comes out?
Chris Boyle Profile
Hello and thank you for writing. We believe you are referring to the dispenser tray/grill # PS11754212. Please let us know if you need any further assistance. We hope this helps. Please contact us anytime
$53.85
In Stock
Grille
Was this helpful?
Thank you for voting!
Timothy - For model number 10650029213
December 16, 2021
What do I do if the icemaker makes to much ice
Chris Boyle Profile
Hello Timothy, Thank you for the question, We suggest checking the Shut Off Arm for the Ice Maker to make sure it is not damaged or jammed, preventing the ice maker from stop filling and making ice. We hope this helps!
$57.15
In Stock
Shut Arm
Was this helpful?
Thank you for voting!
Sonya - For model number 10650029213
January 13, 2022
I want to buy an extra drawer/top and a couple door shelves for my refrigerator. Do you sell them? Thank you.
Chris Boyle Profile
Hello Sonya, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS11749661 for the Top Drawer and Part #: PS12349507 for the plastic Cover that holds the Self and the Glass that sits on top is Part #: PS11731733. The PartSelect Number PS11739091 is the part number for the individual Door Shelf. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
$222.21
In Stock
Refrigerator Shelf Glass
$52.46
In Stock
Refrigerator Door Shelf Bin - White
$171.84
In Stock
Refrigerator Crisper Pan (Clear)
$168.59
Special Order
COVER
Was this helpful?
Thank you for voting!
Karla - For model number 10650029213
August 4, 2023
I have a puddle of water on the bottom of the fridge
Chris Boyle Profile
Hello Karla, thank you for asking. According to our research, we would recommend checking the drain hose to ensure that it is not clogged. If the issue still occurs, you may need to replace the drain fitting, part number PS11740260, to fix the issue. We hope this helps!
$49.97
In Stock
FITTING
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 10650029213

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Bins Broke
391 of 402 people found this instruction helpful.
  • Eric from Hamburg, PA
  • Really Easy
  • Less than 15 mins
Like always your products were ordered and came extremely fast. The installation was quick. No tools needed this time. Now we have 3 door bins where we had two broken ones. Our refrigerator is more organized than ever. Thanks again!
Was this helpful?
Thank you for voting!
Plastic bits dispensed from Ice Dispenser in Door
205 of 254 people found this instruction helpful.
  • john from seaford, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers, Socket set
Removed Ice bin from Fridge

Removed all bolts on bin with nut driver...about six

Removed housing...be careful with spring on crusher/cube control rod

Removed C clamp on end of auger with small slotted screw driver and needle nose pliers.

Removed plastic nut on end of auger shaft

Remov ed Ice crusher jaws and laid them out in the correct order

Removed Ice propeller and installed new part

Put back together in opposite order

Easy
Was this helpful?
Thank you for voting!
Fridge was getting too warm, ice buildup on coils.
159 of 188 people found this instruction helpful.
  • Cathy from Winter Park, FL
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver
WARNING: REPLACING THIS PART REQUIRES CUTTING AND SPLICING ELECTRICAL WIRES. RISK OF ELECTRICAL SHOCK OR FIRE. DO NOT ATTEMPT THIS REPAIR IF YOU ARE NOT EXPERIENCED WITH ELECTRICAL WIRING.

Part Info:
The bi-metal strip is clipped onto the evaporator coils and is designed to regulate the defrost coil temperature. If it is n ot functioning properly you may notice ice buildup preventing air flow (and preventing proper refrigeration), or more rarely the freezer side may get too warm during the defrost cycle.

Materials:
* Replacement bi-metal strip
* Wire cutters
* Wire strippers
* Wire nuts
* Electrical tape
* 10MM socket

Steps:

1: UNPLUG THE FRIDGE! If there is ice buildup, wait until the ice has melted. A box fan blowing at the ice will help melt it more quickly.

2: Remove the panel covering the evaporator coils. It's located inside the fridge, on the freezer side.

3: Un-clip the bi-metal strip from the evaporator coils.

4: Unplug the wires from the evaporator fan, defrost coil and bi-metal strip, then disconnect the main connector that is plugged into the rear wall.

5: Clip both wires to the old ( bad ) bi-metal strip. Cut close to the casing of the bi-metal strip so there are long wires to splice onto.

6: Strip 1/4 to 1/2 inches of insulation off of the ends of the wires ( depending on the size of the wire-nuts you use). Twist the bare wires slightly to prevent fraying.

7: Do the same for the ends of the wires on the (new) bi-metal strip.

8: Take the ends of the wires belonging to the (new) bi-metal strip and the wires coming from the main plug. Take the like-colored wires, and twist the bare metal ends together.

9: Twist on wire nuts, for both sets of wires. Make sure they are snug, with no bare wire showing.

10: Tape over the wire nuts with electrical tape. Tape over the wires nuts in a spiral fashion, completely covering the nut and both wires that are now spliced together. This will prevent accidental shorting.

11: Plug the main plug back into the rear wall of the fridge. Also re-connect the connectors to the evaporator fan and defrost coil. Make sure the clips on the connectors are snug to ensure a good connection.

12: Clip the new bi-metal strip onto the coils, in the same spot as before. ( Usually just after the small incoming copper tubing that connects to the coils, known as the expansion valve. That is usually the coldest spot on the coils during operation).

13: Replace the panel that covers the coils.

14: Plug the fridge back in... Now you fridge should defrost correctly. If it does not, your defrost coil could be burned out, or the control board could be faulty.
Was this helpful?
Thank you for voting!