![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Product Description
Tub Spring Specifications
This part is used to balance the tub during spin cycle. Sold individually.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer Tub Spring
![Replacing your Whirlpool Washer Tub Spring Replacing your Whirlpool Washer Tub Spring](https://img.youtube.com/vi/0RffRedNrpM/maxresdefault.jpg)
Troubleshooting
This part fixes the following symptoms:
Shaking and Moving | Leaking | Spinning Issues
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Maytag.
Part# WPW10250667 replaces these:
AP6017818, 338492, 388492, 62738, 63207, W10250667, WPW10250667VP
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Sarah P - February 13, 2024
Verified Purchase
Easy Installation
Part arrived quickly and was easy to install. Ended up needing to replace tub wear pads as well to fix the issue, but now the washing machine is still and quiet!
Lucie B - June 9, 2023
Verified Purchase
Pas la bonne pièce.....
C'est bien cette pièce que vous m'avez expédiée. Par contre, le vieux ressort avait une bande de couleur verte et était plus "rigide" que le nouveau ressort.. Donc, j'ai remis le vieux. Sur un vidéo, ils montraient 3 ressorts : Un bleu, un vert et un sans rien. Le modèle de ma laveuse semble n'avoir qu'un ressort en arrière, donc, il semble que ce soit la pièce qui est vendue "Tub Spring". Je suis restée surprise de constater que le vieux était vert mais pas le neuf et que ce dernier était définitivement plus "mou" (trop mou).
Debbie M - April 1, 2023
Verified Purchase
Easy Repair,
Easy repair, quick delivery and appreciate the support video!
Steve T - August 10, 2022
Verified Purchase
works as expected
Fast shipping, the right part
Bryan M - March 20, 2022
Verified Purchase
Part was fine, shipping was too long for what I paid.
Part was fine, fit perfectly but sadly did not solve problem. Paid $12 for shipping, fine, but boy was I disappointed to see Purolator ground! It took 12 days to get here. Too long for the price for a part that weighs a few grams.
Sharon J - November 15, 2021
Verified Purchase
Repaired washing machine
Replaced springs in washer and worked again, Thanks to the help of a PARTSELECT employee and the extraordinary delivery service!
Luc C - October 28, 2021
Verified Purchase
Excellent
Exactement ce que je cherchais. Livraison rapide. Merxi
George G - May 5, 2021
Verified Purchase
Easy repair good part
Very good I appreciate it
Rene S - September 23, 2020
Verified Purchase
easy
good
Cliff F - July 28, 2020
Verified Purchase
Very Impressed
The site is well thought out and is easy to work. I ordered the parts in the afternoon and they were in my hands the next afternoon , at a reasonable price. The site has the greatest videos related to the installation of the parts in question and a probability of parts effect against the symptoms, I love that. I would not hesitate to recommend PartSelect. This repair was for my sister and it made it easy to be a hero.
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 2.9 / 5.0, 33 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace Water Pump Coupling
Removed casing tip over washer disconnected water pump. Disconnected motor then replace coupling then reassemble motor then replaced water pump.
Other Parts Used:
-
RICHARD from PHILA, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Socket set, Wrench set
837 of 901 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer tub slammed into washer body during spin cycle
If you load a washing machine unevenly, it will spin out of balance. But our washer seemed to make noise during the spin cycle regardless of how the load was distributed. I suspected that the suspension or balancing springs were getting tired, and ordered a replacement set.
First I disconnected the washer from the water and power supply, then I laid it on its back.
The tub rested on the back of the washer, making two of the three suspension springs relax, and they were pretty easy to pull out with pliers. After the first two were out, I had to support the tub with a couple 2x4s to relax the third suspension spring.
Installation was the reverse of removal - install the lower suspension spring, remove the 2x4s, then install the two other suspension springs.
The tub balancing spring was easy to replace, and probably wasn't the cause of the problem.
With $25 in parts and about 15 minutes, my washer spins much more quietly.
First I disconnected the washer from the water and power supply, then I laid it on its back.
The tub rested on the back of the washer, making two of the three suspension springs relax, and they were pretty easy to pull out with pliers. After the first two were out, I had to support the tub with a couple 2x4s to relax the third suspension spring.
Installation was the reverse of removal - install the lower suspension spring, remove the 2x4s, then install the two other suspension springs.
The tub balancing spring was easy to replace, and probably wasn't the cause of the problem.
With $25 in parts and about 15 minutes, my washer spins much more quietly.
Other Parts Used:
-
Brian from Seattle, WA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
371 of 408 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Machine rocking about like crazy on spin
Took some online research to figure out how to get the cabinet off. Once inside I fitted the wear pads which were a breeze to remove using a knife blade to pry them up and removing them using the screwdriver. The springs were replaced one by one using strong fingers. The machine went through the spin cycle without any rocking or self-destruct noises.
Other Parts Used:
-
john from middle river, MD
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
151 of 171 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Acting like it was unbalanced
I thought I would find broken springs but everything looked good. Comments and video very helpful.I figured springs must be stretched or worn out ,so for the money I figured worth a try. Insallation went well, washingmachine runs like a new machine. Much better than spending money on a new one. Thanks
Other Parts Used:
-
Michael from Glenburn, ME
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
91 of 96 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
tub shacking back and forth
After seeing video it was easy . Took everything apart tub,basket,replaced all springs. Tub wear pads. It took longer because I cleaned eveything,took my time. There was a lot of deposits on tub and outer tub also some rust . Put it all back together all nice and clean . pluged it in put it in spin cycle and the motor just hummed. I than check to see if somethig was stuck no .Pulled motor tested it with out a load and did not work. Motor start winding went. Motor died. 2n one in 7 years. So I fixed that proplem I am a new owner of a Speed Queen washer and dryer .
Other Parts Used:
-
BOB from NIAGARA FALLS, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
78 of 1750 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing machine shook violently while on spin cycle
Disconnected the bracket screws that held the suspension springs in place - fed new springs into bracket and reattached. Local repairman told me that springs dont wear out, they break - wrong, they do lose their tension and thereby lose the ability to counterbalance the spinning load. Washing machine now spins like new - no wobble or shake.
Other Parts Used:
-
Tom from Bloomfield Hills, MI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
57 of 60 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
sounded out of balance even after shifting clothes
The tub was out of alignment and water fell behind it and onto the floor. My brother-in-law suggested my problem could be the tub balancing spring and when I moved my washing machine, there it was on the ground.
The schematic does not show where it hooks up. So after I did what I thought looked right, the machine still did not work properly. Then I replaced the three suspension springs and that didn't solve the problem.
I found a whirlpool "do-it-yourself" repair book at the library and was prepared to tear into the machine. However, I did not have the tub balancing spring in the correct spot at one end. It hooks up from one of the outer bracket to the back of the housing unit along between the legs. There is a hole that had rusted through. I simply drilled a new hole nearby and low and behold it works!
Easy fix - the frustration was with the poor schematic.
The schematic does not show where it hooks up. So after I did what I thought looked right, the machine still did not work properly. Then I replaced the three suspension springs and that didn't solve the problem.
I found a whirlpool "do-it-yourself" repair book at the library and was prepared to tear into the machine. However, I did not have the tub balancing spring in the correct spot at one end. It hooks up from one of the outer bracket to the back of the housing unit along between the legs. There is a hole that had rusted through. I simply drilled a new hole nearby and low and behold it works!
Easy fix - the frustration was with the poor schematic.
Other Parts Used:
-
Lori from Parchment, MI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
35 of 37 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tub was out of balance
went by the instution in the box with the part went very well thanks
Other Parts Used:
-
Delbert from Morgantown, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
26 of 37 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
shaking on spin cycle
Removed the outside body of washer. Used 1/2 plywood between drum and wear pads to make space to pry out pads with screwdriver. Replaced suspension springs and tub spring (use waterproof grease on end of springs. Put washer back together and tested. Problem solved washer not walking all over floor anymore. Thanks for you help.
Other Parts Used:
-
Paul from Milwaukie, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
13 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tub leaning on one side
Changing the springs was a ...snap. The more delicate task was to figure out how to get to them; for this model, the back panel comes off (after removing 3 screws, the drain hose and drain hose plastic coupler, removing the 2 screws holding the control panel, pivoting the control panel and finally removing two spring clips. Also, the plastic water diverter takes a little bit of patience to be unhooked from its slots in the back panel as it will not slide out with the back panel. With the back panel off, the entire "shell" can be removed, exposing the guts. I twisted the tub to release the tension in the suspension springs and replaced them, one by one. Finally, the counterweight spring. I also lubed the support pads to allow for a "friendlier" leveling. Re-assemble, replace the old and cracked water supply hoses, and time for a beer and my girlfriend's obligatory OOOOHs and AAAAHs... All in all (cleanup and test included..) about one hour.
Other Parts Used:
-
Radu from Boca Raton, FL
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
11 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
December 25, 2017
How many tub springs to this model
For model number LSR8444LQ1
Hello James, Thank you for your inquiry. There is 1 tub spring for this model. Hope this helps!
27 people found this helpful.
Was this helpful?
Thank you for voting!
Billy
January 15, 2018
How many springs are for this model.
For model number LBR4132JQ1
Hi Billy,
Thank you for your question. There should be 4 suspension springs in your washing machine. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Josh
January 22, 2018
Washer keeps turn , moving or walking around when spin out other then that works fine. When standing in front of washer as if you where loading or unloading it turns about 90 degrees to the left ever time have made sure its level it does this no matter the size of the load. Any thoughts on how to fix this problem? Have already checked all the springs. Thanks for the help
For model number Whirlpool Washing Machine Model WTW5540SQ0
Hi Josh,
Thank you for your question. If your washer is shaking and moving, there are some parts that you will need to check to see which one is causing the issue. You will need to check the suspension springs, the tub spring, the tub wear pads, the leveling springs, the suspension pads, the agitator directional cogs, the levelling legs and the suspension spring retainers. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Doug
June 26, 2019
Hello, thank you for your quick response to my question. I have looked at the video and it seems straightforward. The machine in the video is a different model. Would I be right in assuming that the method is the same across all the models? Thanks.
For model number YKAWE860W
Hello Doug, Thank you for the question. Yes, the appliance might be different but it will have the same basic steps for installing the springs. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Doug
June 26, 2019
Hi, how many springs are there - #ps11751118 , i would like to replace all once the washer is opened up. The video works for me. Thanks
For model number YKAWE860W
Hello Doug, thank you for your question. There is only one Tub Spring on this model.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Ted
September 27, 2019
I replaced 1 tub spring and 3 balance springs. The tub still tilts forward. So when filling the water splashes out and onto the floor. What next?
For model number 11026058690
Hi Ted, thank you for your question. The only other part that I could suggest you check would be your balance ring. I have linked that part down below for you. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Dale
January 30, 2020
How many tub springs are there in this model?
For model number whirlpool LTE5243DQ3
Hello, Thank you for your question. It looks like your model has 1 of those tub springs. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Doug
June 26, 2019
Hi, My washer bangs and the tub leans to the front. I think a spring might be broken. Do you carry the springs for this model and how do I remove the cab to get at them? Thanks.
For model number YKAWE860W
Hello Doug, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11751118. Once you enter the part number there is a video on how to install it on the site. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Justin
February 8, 2022
I need to buy the correct suspension springs for my model as well as the tub spring. Please advise which correct parts to order? Great instruction videos.
For model number YLSR5233EQ1
Hello Justin, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11743345 for the Suspension Spring and PartSelect Number: PS11751118 for the Tub Spring. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
![](https://img.youtube.com/vi/4Ic58h4QXNI/maxresdefault.jpg)
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Trent
February 7, 2019
The washer that i am trying to repair is the above model number and i wanted to know how many suspension springs and counter-balance springs there are for this model. Currently the washer is walking during the spin cycle so i am trying to get the tub to spinning on the correct axis. Thank you.
For model number MVWC500VW0
Hello Trent, Thank you for the question. This model number requires 1 Tub Spring PS11751118 and 3 Suspension Springs, PS11743345. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- 3
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11751118
Manufacturer Part Number: WPW10250667
Manufacturer Part Number: WPW10250667
Brand
Model Number
Description
Kenmore
10682872600
Washer
- Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
1101050299
Washer
- Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)