Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Craig R - March 7, 2019
Verified Purchase
Worked as expected
Everything good.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Andy
March 13, 2019
2 questions: Drum wobbles a lot, and makes noise, then it trips the spin control so that we have to unplug the machine overnight for it to reset itself. If you where to unplug it for only an hour or so,when you turn on the power and move the selector to drain / spin, the door locks followed by a click (in the back of the machine?) then nothing.Is it a central control unit (ccu) ? if so what is the part number for there are two(2) as i see it part #3 & part #6.
as for the out of balance of the drum, how many shock absorbers are there, found one in the back by the drum motor, are there others? perhaps springs ? awfully wobbly when starting the spin cycle
thanks
For model number WFW9050XWOO
Hi Andy,
Thank you for your question. Based on what you described, if you have to unplug the washer to get it to reprogram then the issue is likely the main control board, part number PS11755972. Also, if the drum is wobbling, there are some parts that you will need to check to see which one is causing the issue. You will need to check the shock absorbers, the spring, the leveling legs, the drive belt, the stacking kit, the counterweight and the bellow. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Jean-Guy
May 7, 2019
Sorry i'am french but i tried to do my best to explain my problem.I buy this washer brand new but i only use last year.The problem is i push power,select,start pause,temp. And after the washer start to work on status ,add garment and the washer to work but after few minutes the bell is earing .The washer stop to wash.It don't do rinse,and the spin.If i use the botton push and select and push the botton rinse and spin it work very well.
For model number ynfw7300ww00 amana washer
Hi Jean-Guy,
Thank you for your question. It sounds like the issue could be either the electronic control board or the door lock latch. You will need to test both parts with a multimeter to see which part is causing the issue. Here is a link to one of our videos on YouTube that you may reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Jean-Guy
May 13, 2019
Sorry i am french but i tried to do my best.To explain the problems.This is what i do when i start the washing.Push to select and choose normal.And buttom cold.After start and lights open at add garment and after it goes to wash but it stop is not continious the program.If i use the bottom push to select and choose rinse&spin or drain&spin it work very well.The first time after question about the problem i order same problem .So i explain again the problem and i order wpw10212764 no difference the same problem .Can't you help me on my request .Thanks for helping me sincerly jean-guy.
For model number ynfw7300ww00
Hello Jean-Guy, thank you for inquiring. For this symptom you will want to replace either the Door Lock Latch part PS11751211, the Door Strike/Hook part PS11746261, or the Temperature Sensor part PS11755214. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750473
Manufacturer Part Number: WPW10212764