This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
Sold individually. These shock absorbers keep the washer from vigorous shaking during its cycles. This shock absorber is for washers.
Shock absorber absorbs the vibrations and movements of the oute...
This is a replacement tub-to-pump hose for your washer. This hose runs from the bottom of the tub to the water pump, and is used to transport water. The hose can develop a hole, and when this happens ...
Water inlet valve controls the water flow into the washer.
Fits some washers in the following series: Kenmore 110; Whirlpool CHW, WFW and YWFW; Maytag CHW, MHN, MHP, MHWE, MHWZ and YMHWE; Amana NFW...
This is the replacement bellow clamp for your washer. It is approximately 18 inches in diameter and is sold individually. The bellow clamp goes around the bellow in your washer and holds it in place o...
This part is the replacement drive belt for your washer. It is made of black rubber and is approximately ½ an inch wide and 48 inches long. It has 6 grooves and is sold individually. The drive belt is...
$64.15
In Stock
Questions And Answers for WFW9050XW03
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
November 30, 2019
Looking for shipping bolts for Whirlpool model wfw9050xwo3
For model number WFW9050XW03
Hello James and thanks for writing.
Bolts Part Number: PS10066106 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
I need to change the rear drum on this machine. What do I need to do?
For model number WFW9050XW03
Hi Mike, thank you for your question! In order to help you with the replacement of the inner tub, part number PS11750225, we have attached a relevant video, which may not be of the exact model but will help you with the process. You may watch the video from start till 16:25 for the removal of the inner tub and then from 23:00 till the end to install the new inner tub. We hope this information is useful!
What's possible cause of washing machine to stop mid-cycle?
For model number WFW9050XW03
Hello Erlinda, thank you for getting in touch. We believe your washer is having this problem because of the faulty control board, part number PS11755971. It manages the washer's functions such as filling, washing, draining and spinning. You may need to replace it to fix the issue. Glad to be of help!
Removed the front panel unplugged The washer drained water out, lift the washer up to un screw the drain pump. Then unhooked the hoses from pump put the other pump in.
Pump started making noises like ball bearings grinding. took the lower front cover off pulled the strainer out of the pump housing and found $2.55 in nickles dimes and quarters. Some 223 bullets and about 20 bobby pins. Together they had destroyed the impeller, so ordering a new one and installing it did the trick. Easy installation about 15mins.
This model is a front-loading washer. The spring loaded retainer for the front of the boot must be removed, then the boot can moved to the side exposing the module. Remove the two screws holding the model, pull the model out, remove the three electrical plugs, then reverse this procedure to install new module.