This burner cap sits on top of the burner base. Sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range, Dryer, Washer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Maytag, Jenn-Air.
Part# WPW10183369 replaces these:
W10183369
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
April 12, 2019
I need a burner cap for the right rear burner. The part description just says 11a and 11b burner caps. Not sure which one to order. It's for a larger burner.
For model number WFG320M0BW0
Hi Jerry, thank you for your question. I have linked to the right rear burner cap down below for you. Good luck with your repair.
Could you please tell me which burner cap is fiting the left rear burner ?
Thanks
For model number WFG505M0BS0
Hi Ping,
Thank you for your question. The part number listed under your model number for the left rear burner cap is PS11749753. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Was this helpful?
Thank you for voting!
Gilmar
May 30, 2022
My left rear burner its making a clicking noise and doesnt start could be the burner? Thank You.
For model number Whirlpool WFG505M0BS 30" Stainless Freestanding Gas Range NOB #108521
Hi Gilmar,
Thank you for your question. If the surface burner is clicking, there are a couple of things that you will need to check. First check and see if the burner caps aligned correctly. If they are not aligned correctly, you will need to re-position them. If you have recently cleaned the cooktop or if there has been excess moisture caused from either cooking or spills, remove the burner caps and allow the burners to dry out before using them again. If there is food debris in the burner, it will need to be cleaned, so it can work properly. If you have done all this and the burner is still clicking, you may need to replace either the spark module, the spark ignition switch or the igniter. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11749753
Manufacturer Part Number: WPW10183369