Whirlpool WP8557403 - Thermostat | PartSelect.ca
Thermostat – Part Number: WP8557403
( Grid squares measure 1x1 inch )
Thermostat – Part Number: WP8557403 Thermostat – Part Number: WP8557403 Thermostat – Part Number: WP8557403 https://partselectca.azureedge.net/Schematics/Whirlpool/8YUQKTYP.gif

Thermostat

Your Price

CAD$79.62

PartSelect Number PS11746386
Manufacturer Part Number WP8557403
Manufactured by Whirlpool

This authentic OEM high limit thermostat is made for your dryer. It is an important dyer element, because it will automatically shut off the heating element when it overheats. Be sure to disconnect the power to your dryer before you begin this repair.

This part works with the following brands: Whirlpool, Maytag, Kenmore, Amana, Crosley.

This part works with the following products: Dryer.

This part fixes the following symptoms: No heat or not enough heat | Too hot | Will Not Start

Questions & Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Customer Repair Stories

Average Repair Rating: 3.0 / 5.0, 2 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Linda from DANVILLE, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Parts Used:
WP8557403, WP8544771, W10120998
Dryer stopped heating
We have a very early model of the He3. We had to follow directions for the He2 model to replace the heater element and thermostat. Access is easy through the front panel, but removing and replacing the element required some force and maneuvering in a small area.

We replaced both the element and the thermostat since we had the entire part disconnected and removed. So far working great!
1 person found this instruction helpful.
Was this instruction helpful to you?
Peter from Diamond Bar, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Parts Used:
W10909685, WP8557403
No heat
Remove backing very easy (approximately 12 8mm screws).
Thermostat on left side facing the back. 2 8mm screws . Thermal fuse slightly further towards front of dryer but still accessible (caution longer arms needed). Unscrew first them release safety clamps
to unplug (be gentle have patience). Place all back same as removed and it worked!!
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
1 Review
5
out of 5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
Kenmore
11061632610
Dryer - ELECTRIC DRYER
Kenmore
11067032600
Dryer
Kenmore
11067032601
Dryer
Kenmore
11067042600
Dryer
Kenmore
11067042601
Dryer
Kenmore
11067052600
Dryer
Kenmore
11067062600
Dryer
Kenmore
11067072600
Dryer
Kenmore
11067082600
Dryer
Kenmore
11067086600
Dryer
Kenmore
11067087600
Dryer
Kenmore
11067092600
Dryer
Kenmore
11068062800
Dryer
Kenmore
11068062801
Dryer
Kenmore
11068072800
Dryer
Kenmore
11068072801
Dryer
Kenmore
11068082700
Dryer
Kenmore
11068082701
Dryer
Kenmore
11068087701
Dryer
Kenmore
11068092700
Dryer
Kenmore
11068092701
Dryer
Kenmore
11068097701
Dryer
Kenmore
11068103310
Dryer - ELECTRIC DRYER
Kenmore
11068132411
Dryer - ELECTRIC DRYER
Kenmore
11068132412
Dryer - ELECTRIC DRYER
Kenmore
11068133412
Dryer - ELECTRIC DRYER
Kenmore
11068133413
Dryer - ELECTRIC DRYER
Kenmore
11069132410
Dryer - ELECTRIC DRYER
Kenmore
11069132411
Dryer - ELECTRIC DRYER
Kenmore
11069132412
Dryer - ELECTRIC DRYER