Product Description
Bellow Kit Specifications
Also known as a Boot Seal and is used in front load washers. This part is used to keep the clothes inside the tub during the wash cycle and to prevent water from leaking. The folds in the bellow allow the tub to move separately from the door during the spin cycle.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Frigidaire, Electrolux, Crosley.
Part# 134728400 replaces these:
AP3886970, 1191288, 134603700, 134739800
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
JEFFREY W - March 30, 2021
Verified Purchase
Product fits well but ....
The part was great. Installation however needs two people and a bunch of patience. Paper directions were difficult to follow. You tube video helped though. This was my second time making same repair but still a difficult process. Good luck. The replacement explanation needs better photos.
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kim
August 12, 2017
I believe the part i need is the boot seal. It is moldy and causing black stains on our clothes if they come in contact with the seal when being removed. Is this the correct part to replace?
For model number ATF8000FS1
Hi Kim,
Thank you for your inquiry. Yes, this part is the correct part for your model. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Donald
February 16, 2018
There is the rubber seal as you go into the washer. It goes all the way around the opening and it seals the door. Ours is leaking water and has black mold on it. What is this seal and can it be replaced.
For model number ATF8000FS1
Hello Donald, thank you for your question. The front tub gasket, or bellow, as its called on our site is part number 134728400. The repair is a fairly simple process. Unfortunately, we do not have an installation video for this exact part right now. You can find some video's on YouTube that will give you some pointers on replacing that part. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Regina
April 17, 2018
How do I find the parts number so I can make sure I am getting the right part for my machine
For model number ATF7000FS0
Hi Regina, Thank you for the question. When you enter the model number into the site it will list all the parts available for that appliance. If you require a new bellow for the model number provided, the part number is PartSelect Number: PS1156757. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kim
October 2, 2017
Does the boot seal come with instructions for removal of the existing and installation of the new one?
For model number ATF8000FS1
Hi Kim,
Thank you for your question. Unfortunately the manufacturer does not always give installation instructions with their parts. To get to that boot seal, you will have to first remove your top panel. Then you will have to remove your control panel. Make sure to unplug your board from the wiring harness. You would then remove your lower kick plate. Once you have removed both of those parts you can then remove your whole front panel and that will give you access to the bellow. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jeannette
February 25, 2022
I need the part for the wash selector. Skips when trying to select cycle.
For model number FAFS4474LAO
Hello Jeanette, thank you for writing. The part that is responsible for the washer's functions such as filling, washing, draining and spinning is the Control Board PS3653396. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Fiona
October 12, 2022
I need a replacement part for the door boot seal for ATF8000FE1 Frigidaire washer model, serial number XC85104012
For model number ATF8000FE1
Hello Fiona, thank you for contacting us. We have researched the model you have provided and have found that the part you are looking for is part number PS1156757. If you would like assistance placing an order, please contact customer service. Good luck with your repair!
Was this helpful?
Thank you for voting!
Norma
April 11, 2024
Does the rubber boot seal part# PS1156757 works for this Frigidare WASHER model FAFW3577KW1 Serial# 4C02106501
For model number FAFW3577KW1
Hello Norma, thank you for the question. Yes, the part you mentioned is compatible with your model. If you need help placing an order, customer service is open 7 days a week!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1156757
Manufacturer Part Number: 134728400
Manufacturer Part Number: 134728400
Brand
Model Number
Description