Frigidaire, Westinghouse, General Electric, Kenmore.
Part# 134422700 replaces these:
AP3867022, 1156818, 131692000, 131692100
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Leaking washing machine; water would not shut off on fill up and rinse
Replacing the switch is relatively easy, however, I would caution all experiencing similar problems one thing. Before assuming, as I did, that the switch was bad, first remove the panel of the washer that houses the washing tub/basin. On the back of the tub, check to make sure that the tube connecting the tub and switch has not come off from the tub as it did in my situation. The solution to my problem of a leaking washing machine where the water would not stop filling on both wash and rinse cycles was simply reattaching the tube to the tub. If I would have checked that first, total job completion time would have been under 15 minutes. Hope this helps. If you need to replace the actual switch, remove the knobs, screws, and panel. Remove the wires, tube, and screw from the switch and reassemble new switch. That took me about 30-45 minutes.
Other Parts Used:
Aaron from Williamson, WV
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
91 of 102 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mohyedin
July 8, 2021
Does this part have 4 positions?
Hello Mohyedin, Thank you for the question. This switch is a 3 position switch. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Margery
August 20, 2021
My washer would not stop filling even after the power was disconnected. It overflowed onto the floor. Will this part solve the problem? I watched a video that also suggested it might need a new water valve due to a bad solenoid. Please advise.
For model number FEX831FS2
Hello Margery, Thank you for writing. Your Inlet Fill Hose PartSelect Number PS1524416 may be clogged or punctured or even fallen off. Hose issues will reduce the pressure and cause the water level switch not to shut off power to the water inlet valve. You may also check the Water Inlet Valve PartSelect Number PS524416 or Water Level Switch PartSelect Number PS1146954. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steven
February 5, 2018
My washing machine will work if i manuelly cycle it through. Replaced timer, same results. Could t be door switch or water level indicator?
For model number Fwt647ghso
Hi Steven,
Thank you for your question. If the washer is not starting, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door lock and switch assembly, the door strike, the magnet, the shock absorbers and the spin control board. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Steve
July 15, 2019
My unit fills it will also spin and drain but will not agitate? Any guess on the part i need?
For model number Glet1031cso
Hello Steve, thank you for inquiring. For this symptom you will want to consider either the Drive V-Belt part PS1146950, the Motor with Pulley part PS815490, or the Transmission Assembly part PS1524604 for your model. We hope this helps.
Was this helpful?
Thank you for voting!
Greg
November 1, 2022
My washing machine will not complete filling in rinse cycle. We see the water flowing in, get to a certain level, but water flow doesn’t shut off (our well pump keeps running) and agitate/spin won’t start. Is this the water level switch? What’s my replacement part?
For model number FGX831FS2
Hello Greg, thank you for your query. It seems like the water level switch, part number PS1146954, is defective. We recommend replacing it to resolve the problem with your washer. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
Was this helpful?
Thank you for voting!
Johanna
March 4, 2024
Can you replace just the water level or do I need to replace the whole board?
For model number FEX831FS1
Hello Johanna, thank you for getting in touch. Yes, the water level switch, part number PS1146954, can be replaced. Glad to be of help!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
