WED9200SQ0 Whirlpool Dryer - Overview

Diagrams for WED9200SQ0

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dryer Repair Kit – Part Number: 4392067
$56.05
In Stock
Dryer Repair Kit
★★★★★
★★★★★
(201)
Part #4392067
This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings, and one washer. This universal maintenance kit is an all-encompassing kit for fixing a noisy dryer, among other symptoms, but noisy being the most common. It is compatible with 27-inch wide dryers built from 1965 onwards. Be sure to disconnect the dryer or shut off the house circuit breaker for the appliance before you begin your repair. To access these parts, you will need to remove the dryer drum. For this installation you will need a 1/4-inch nut driver, a long flat-blade screwdriver, a short flat-blade screw diver, and a Phillips screwdriver.
Door Catch Kit – Part Number: 279570
$10.58
In Stock
Door Catch Kit
★★★★★
★★★★★
(87)
Part #279570
This kit contains two door strikes, and three door catches to service dryer doors that have one or two catches.
Idler Pulley – Part Number: 279640
$34.29
In Stock
Idler Pulley
★★★★★
★★★★★
(84)
Part #279640
This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If damaged or broken the dryer will not dry properly, will not tumble properly, or may not even start. Installation is rated as "Medium" difficulty. This part is located on the dryer drum, around the tension pulley. Refer to your user manual and model number for repair instructions and to ensure this part is right for you. For this repair project, the tools needed are a Phillips screwdriver, 1/4 inch nut driver, putty knife, small flat blade screw driver, and needle nose pliers.
Dryer Drum Support Roller – Part Number: WPW10314173
$28.21
In Stock
Dryer Drum Support Roller
★★★★★
★★★★★
(15)
Part #WPW10314173
This genuine OEM dryer drum support roller is designed to hold the drum in place while allowing it to rotate smoothly and quietly during operation. Built for durability and reliable performance, it helps reduce noise and ensures consistent tumbling. Ideal for replacing worn or damaged rollers, it resolves issues such as squeaking, rumbling, or poor drum movement, helping restore efficient and dependable dryer operation.
Lint Filter – Part Number: W10120998
$62.65
In Stock
Lint Filter
★★★★★
★★★★★
(68)
Part #W10120998
This dryer lint filter is designed to capture lint and debris during the drying cycle, helping maintain airflow and prevent potential fire hazards. Measuring approximately 12.5 inches wide by 10.5 inches deep, it fits securely into the designated slot within compatible dryer models. Regular inspection and replacement of the filter are essential for optimal performance. Installation is tool-free—simply remove the old filter and insert the new one. During replacement, it's recommended to check the filter slot for any accumulated lint, which should be cleared to ensure safe and efficient operation.
Multi Rib Belt – Part Number: 661570
$34.28
In Stock
Multi Rib Belt
★★★★★
★★★★★
(52)
Part #661570
The Drive Belt is a 93 1/2" belt which wraps around the dryer drum to allow tension and movement. If broken the dryer will not turn properly, or there may be loud noises. The part is rated as "medium" difficulty to install. Refer to your model number and user manual to ensure this part is correct for you. To complete this repair you will need a Phillips screwdriver, 1/4 inch nut driver, a putty knife, and a pair of needle nose pliers. Ensure you disconnect your power to the dryer before beginning this repair, which should take between 30 and 60 minutes maximum to complete.
Dryer Thermostat Internal bias – Part Number: WP8577274
$45.05
In Stock
Dryer Thermostat Internal bias
★★★★★
★★★★★
(24)
Part #WP8577274
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
Leveling Foot – Part Number: 49621
$10.95
In Stock
Idler Pulley with Bracket – Part Number: W10837240
$41.14
In Stock
Idler Pulley with Bracket
★★★★★
★★★★★
(50)
Part #W10837240
This idler pulley assembly includes the pulley and bracket, ensuring proper tension on the dryer drive belt for smooth drum rotation. Compatible with several Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef dryers, this OEM part is ideal for replacing damaged components. Disconnect power before installation.
Moisture Sensor – Part Number: WP3387223
$15.29
In Stock
Moisture Sensor
★★★★★
★★★★★
(11)
Part #WP3387223
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is done, you may need to replace the sensor. You will find the moisture sensor behind the lint screen. Be sure to disconnect the power source from the dryer before you begin this repair. Note: Some model's require two sensors, please order quantity needed. Sensor only, harness is not included. This part is sold individually.
Dryer Heater Element – Part Number: WP8544771
$139.33
In Stock
Dryer Heater Element
★★★★★
★★★★★
(56)
Part #WP8544771
The dryer heating element generates the heat required for drying clothes. Constructed with a nickel-chrome coil, it resists electricity to produce heat. If the dryer no longer heats, inspect the thermal fuse before replacing the heating element. Disconnect power and wear gloves when installing. Compatible with many dryer models.
Roller Support Tri-Ring – Part Number: WPW10512946
$18.70
In Stock
Roller Support Tri-Ring
★★★★★
★★★★★
(4)
Part #WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pulley shaft, or on the rear drum roller shaft. In either case, you will need to remove the front panel of the dryer and the drum to access the part for repair. Once you have accessed the damaged tri ring, you will simply need to slip it off and replace it with the new one. This part is sold individually. Be sure to disconnect the power source from the dryer before you begin this repair.

Manuals & Care Guides for WED9200SQ0

Click to download

Questions And Answers for WED9200SQ0

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Merry - For model number WED9200SQ0
February 5, 2020
Dryer won’t start f 01 is displayed on screen what is problem
Chris Boyle Profile
Hello and thank you for writing. We suggest to try a hard reset: Go to your breaker box and shut the breakers for your unit off, wait 5 minutes and then turn the breaker to on again. That should hopefully clear this problem. If it does not then the F01 error code means the primary control unit PS11748333 in the dryer has failed and will have to be replaced. We hope this helps. Please contact us anytime if you require further assistance.
No Longer Available
Dryer Control Board
14 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Timothy - For model number WED9200SQ0
February 21, 2020
The dryer will not start running. All of the lights come on and i push start....nothing for a few seconds and you here a click and nothing happens
Chris Boyle Profile
Hello Timothy, thank you for your inquiry. If your dryer won't start, the most likely causes are a lack of power, a defective door switch, a blown thermal fuse or a bad start switch. For your model WED9200SQ0, the most common problem is the door latch. This can be located under part number 279570. We hope this information helps!
6 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Geo - For model number WED9200SQ0
July 21, 2021
First question: Is the model number YWED9200SQ0(Canada) the same as wed9200sq0 for parts replacements? Second question: Well, we heard a whining noise when our Whirlpool dryer was running, but it still functioned okay with the noise, so we said "we really should get it repaired", but kept on using it. then it stopped with a bang! (lights on but stopped) so the second question is "are we stupid" and the answer is yes. Third question: which parts do you think we might need besides a new cable?
Chris Boyle Profile
Hello Geo, Thank you for the question. The YWED9200SQ and the WED9200SQ0 are similar models but one if US and the other is Canadian. We suggest using YWED9200SQ0 for parts in Canada. We suggest checking the Drum Support Rollers, Belt and the Idler Pulley. We hope this helps!
$34.29
In Stock
Idler Pulley
$34.28
In Stock
Multi Rib Belt
$28.21
In Stock
Dryer Drum Support Roller
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Harold - For model number WED9200SQ0
November 27, 2019
I am trying to find a heater element for my dryer but i cannot seethe part number which is 2406024-elsy
Chris Boyle Profile
Hello Harold, thank you for your question. The heating element is PartSelect Number: PS11746337. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Frances - For model number WED9200SQ0
June 28, 2022
This Whirlpool Duet Dryer has ONLY been working on the Timer or air settings for some time now. The other settings all show 3 dashes ---. Today, I did a diagnostic test and the F28 code appeared - Moisture Sensor Strip is open. Although the Timer setting works, now the dryer no longer heats up. There is enough power and all lint is cleaned out. Would new Moisture Sensors fix the heat problem? Is the control knob a control board electrical problem? I have read what can cause a heating problem.
Chris Boyle Profile
Hello Frances, thank you for your question. Your problem could be either of these two, the Moisture Sensor is PS11741408 or the moisture sensor Wiring Harness is part PS11741707. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
$15.29
In Stock
Moisture Sensor
$108.83
In Stock
Dryer Moisture Sensor Wire Harness
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Common Symptoms of the WED9200SQ0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Catch part had fallen out,/ was missing
676 of 740 people found this instruction helpful.
  • Terri from Saint Augustine, FL
  • Really Easy
  • Less than 15 mins
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source.
Was this helpful?
Thank you for voting!
felt strip came off lint screen
223 of 279 people found this instruction helpful.
  • JEFFREY from FALL RIVER, MA
  • Really Easy
  • Less than 15 mins
ordered new lint screen, removed old screen, inserted new screen.
Was this helpful?
Thank you for voting!
Door wouldn't latch.
204 of 285 people found this instruction helpful.
  • Melody from North Las Vegas, NV
  • Really Easy
  • Less than 15 mins
I can't believe I waited so long to find this part and do this. I got the package very fast, opened it, took the piece to my dryer and popped it into place with my fingers. It worked perfectly! this took all of two minutes and saved me from having to hold the dryer door closed with a stick. Thank you, thank you!!!
Was this helpful?
Thank you for voting!