All Installation Instructions for KitchenAid Cooktop KGCD807XBL00

Broken fan knob on Jenn-Air cooktop

I took the old knob off, got needle nose pliers to get the small steel sleeve off the post, and put the new knob on. The knob had a number on the underside, but it is not the part number. Part Select's picture showed the number, so I knew it was the right part.

Parts Used:

Knob - Chrome

Paul from Anahuac, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Old burner knobs had cracks

Removed the old burner knobs by hand, and replaced them with four new knobs.....

Real Easy!!

Parts Used:

Burner Knob - Stainless Color

Melvin from San Marcos, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Burner Knob stipped out

Simple repair to replace stripped out knob. More importantly we ordered the part over Christmas and it arrived within 2 or 3 days

Parts Used:

Knob - Chrome

Tracey from Cypress, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

2 of the old knob broke from my stove and look over the part from part select.com, it was very easy to find, good price and was delivered in 2 days. The service was outstanding.

I actually did it manually. It was fast and easy.

Parts Used:

Knob - Chrome

Mayela from Plano, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Six burner gas cooktop, two units not lighting properly

It was very simple two Phillips head screws to remove the burner and one screw to remove the ignitor. It was probably less than a 5 minute job per burner. Unfortunately one burner had a very rusty screw holding the ignitor and the head stripped out. I tried a stripped screw removal tool with no success so I used a drill press to drill the screw out. It still took less than 30 minutes. Now both burners work like new

Parts Used:

Burner Electrode

Louis from SUMMERVILLE, SC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

electrode sparked but not enough to lite burner

Unscrewed burner assembly and removed wire. Unable to remove electrode screw. Striped head of screw. Tried penetrating oil but no luck. Tried to drill and use easy out bit but ruined burner assembly and had to order new burner assembly. When assembly came it had electrode in place but website does not show electrode with assembly except on one burner. With mail and all it took about a week to fix 2 burners. Returned unused electrode for credit. Overall, cheaper then a service call by far.

Parts Used:

X-Large Burner Head with Electrode

W E from Camden, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Stove knobs broken, couldn't turn stove on

To be honest, it was nothing much. Had to reach and remove metal collars that were left behind around the pins, with needle-nose pliers. Put in the new knobs, and we were done.

What really left me impressed was 1) that the rep sent me pictures of the suspected knobs over email so I could identify them easily, and 2) I was expecting to wait for a week but I had the parts the next afternoon!!

Parts Used:

Knob - Chrome

Manish from Los Altos, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

broken burner knob

just replaced with a new one. very easy

Parts Used:

Burner Knob - Stainless Color

Elena from Chandler, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

broken burner knob

The hardest part was finding the part number...and that wasn't all that bad. Perfect match; perfect fit.

Parts Used:

Knob - Chrome

susan from norfolk, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Burner Knob Melted

Pulled the old one off, pushed the new one on. Super easy. Simple ordering, quick processing and delivery. Way to go PartSelect!

Parts Used:

Burner Knob - Stainless Color

Greg from Syracuse, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

erratic spark from electode,gas would no ignate.

Removed the two fastening screws with a small square head screwdriver,lifted the burner head disconnected wire from damaged electrode. To install just reversed the steps,total time less than ten minutes.

Parts Used:

X-Large Burner Head with Electrode

jose from san juan bautista, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Plastic Burner Knobs cracked

Pulled off the old and pushed on the new. Took less than a minute.

Parts Used:

Burner Knob - Stainless Color

Sid from Saint Francisville, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Knobs on the new JennAir Range I just purchased started to melt and when they were called they did nothing about it. I had to call and get new knobs at my cost.

Very easy, just removed the old ones and the new ones just clicked on.

Parts Used:

Burner Knob - Stainless Color