DB5710DT Samsung Dishwasher - Instructions

I unplugged the dishwasher under the sink. I opened the dishwasher up and took out the 12 screws holding the inside door facing on. I gently moved the door facing down towards the dishwasher to reveal the door locking mechanism at the top of the door. I unplugged the mechanism and plugged in the new one. I put the door back together the s ... Read more ame way I had taken it apart. In all it took about 12 minutes. Works like a charm.

Very simple to change out. Unsnap the broken one off rack and snap new one in place. Take snap in stop out of slider and put roller into slide, reinstall stop and your done.

Easily Installed new wheel. We used existing wheel on opposite side as a guide.

repair easy. part matches perfectly.

I replaced the wheels and now I am my wife's hero...yeah me!

Took the end cap off the top rack and partially slid out the broken wheel. The old wheel was removed without any tools and new wheel replaced. This model has a center hub with clip for the wheel. The unit works great now. Website was easy to use to identify the correct part. Part came within 2-days of ordering.

Very simple to replace. Pulled off the stop on the track, pulled off the broken wheel, and slid on the new one. It helps to look at the orientation of the other wheel cause it is not "intuitive" how to thread it on.

Unclipped the old wheel from the rack and clipped in the new one.

Remove lower basket. put nut on verticle shaft, turn clockise by hand, use pliers gently to secure and replave lower basket.

eash as pie. snap them onto the piece of frame on the bottom rack and the problem is solved

I haven't gotten to our rental to get the job done yet but it should go real easy because the broken one came off real easy these should go on just as easy. Thanks again for the parts

Saw the replacement part on your website, ordered it, we cleaned the location where it fits, pressed it on for a neat clean fit. It took no more than five minutes. It saved us calling a service engineer that would have probably cost us over $100 with the part. We fixed it for $25. Thanks PartSelect for prompt and efficient service.

just snapped the wheels on. It took less than 10 minutes.

Took the stoppers off the front and just popped off the old wheels and popped the new ones on. Super easy.

I ordered 2 wheels just in case I would destroy the first one. Got out the screw driver and popped the new one, now it glides with ease. Sorry do not remember the model #