CAP2000P-OF (Type 0) Bostitch Compressor - Parts

This is an authentic Bostitch replacement part, sourced from the original manufacturer for use with air compressors. The flanged hex head screw is commonly used to secure the rubber feet to the bottom of the air tank. This screw is available as an individual replacement part, please note four screws are required.

This is an OEM part sourced directly from the manufacturer. The washer is found in a Bostitch air compressor. This part is made of metal, and is used to help secure the motor fan. Please be aware that there are different washers used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a...Read moren Allen wrench or screwdriver when replacing this part. This item is sold individually.

This is an authentic Bostitch replacement part. The seeger is designed by the manufacturer for use in air compressors. This part is made of metal, and is a retaining ring used to hold the bearing in place in the motor/crankcase assembly. You may require pliers when replacing this part. This item is sold individually.

This is a genuine replacement part that has been sourced from the original manufacturer and is intended to be used with air compressors. The metal coupling attaches to the manifold assembly. This item is used to link the air hose with the quick connect coupling. This item is sold as an individual replacement part.

An authentic manufacturer-sourced replacement part that is supplied for use with Bostitch air compressors. Over time the filter may become dirty and clogged restricting the airflow which can result in significant loss of power, inspect it periodically and replace air filter as needed to maintain peak performance. This is a complete assemb...Read morely which includes a durable metal housing with a pleated paper filter which helps to ensure the air that goes into the unit is free of dust and other contaminants. Please note this high-quality air filter is sold individually.

This replacement hardware is a high quality item that is specially manufactured for use on Bostitch air compressors. It is an authentic screw that is used to secure the conrod cover to the connecting rod. Please note this durable metal torx screw is sold individually.

This is an authentic Bostitch replacement part. The pressure gauge cover is designed by the manufacturer for use in an air compressor. This part is made of rubber, and is used to secure the pressure gauge in the control panel. You may require a screwdriver when replacing this part. This item is sold individually.

This fan is a genuine Bostitch replacement part. It is commonly used in air compressors. This fan keeps the motor cool to prevent overheating. It should be replaced if any of the fins are broken or chipped. Be sure the fan is free of debris to allow air in. This part is made of plastic and sold individually. A screwdriver is needed to replace it.

This is an authentic part which is supplied directly from the original equipment manufacturer for use with Bostitch air compressors. The special cover is used to house and protect the pump, the motor, and the regulator assembly. It is an identical replacement for a missing or a faulty component that was installed on a new unit. Make sure ...Read moreto refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this cover. Note, it is made of high-quality materials and is sold individually. Keep in mind the other half of the cover AB-9038316 Semiplastic Cover Ul is sold separately.