C2002 Porter Cable - Parts

Keep your air compressor operating efficiently with this pump and motor assembly, the core component responsible for generating and compressing air for storage in the tank. A worn, damaged, or failed assembly can lead to pressure loss, reduced performance, or an inability to build air pressure, making replacement an effective way to resto...Read morere compressor operation. Designed as a complete replacement unit, it helps return your compressor to reliable working condition with minimal downtime. Because this is a major assembly, refer to your compressor's parts diagram or service manual to confirm the correct application and installation before repair. Sold as a complete assembly.

This is a genuine replacement part sourced directly from the manufacturer. The screw is commonly found in compressors and generators from Porter Cable, Delta, DeWALT, DeVilbiss, and Black & Decker. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are differ...Read moreent screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a screwdriver when replacing this product. This item is sold as an individual replacement part.

Genuine OEM replacement part, this item is sold individually. A Pressure Switch controls the the compressor tank pressure. It will turn the compressor on when the tank pressure falls below the preset cut in point. It will also turn the compressor off at the preset cut point. This Pressure Switch is used on all of the compressor models shown below. One hose clamp included.

This is an authentic Porter Cable replacement part. The screw is designed by the manufacturer for use in air compressors. This part is made of metal, and is generally used to secure the gauge cover. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. ...Read more You may require an Allen wrench or hex key when replacing this part. This item is sold individually.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with air compressors from Porter Cable and DeWalt. The metal screw is used to secure the handle to the shroud assembly. This item is sold as an individual replacement part, and a screwdriver is needed to install this item.

This replacement regulator/manifold assembly is specially designed for Porter Cable and Dewalt air compressors. It is a genuine item that is sourced directly from original equipment manufacturer. This part plays an important role by letting the user to adjusts the pressure of the air coming from the tank to the desired level. Includes a m...Read moreetal regulator body, two (2) gauges, a brass quick connect fitting and a regulator knob. To complete this repair you will need a set of tools such as: screwdriver, long-nosed pliers, wrenches and heavy-duty wire cutters. • Depressurize the tank • Remove the manifold cover • Remove the pressure hose • Remove the pump assembly from the tank • Remove the manifold • Remove the manifold nipple • Transfer the safety valve • Install the new manifold kit

This metal air compressor exhaust tube is used in compressors. It is used to vent gases away from the engine. Keep in mind this part is priced individually. It goes between the hose clamp and the tube seal and is an original manufacturer part. If it becomes broken a screwdriver and pliers may be needed during replacement.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Porter Cable and DeWALT power tools. The switch is an important component which allows a user to turn the equipment on and off with a simple flip of a switch. Over time parts will wear out and may begin to fail eventually requiring a repla...Read morecement. Please note this high-quality plastic body switch is sold individually. Make sure to check the appropriate diagrams of your model for the correct location and application of this item.

This replacement screw is a genuine OEM sourced hardware that is designed for use with air compressors. It is generally used to secure the shroud, please make sure to check appropriate diagrams for correct application of this screw. One durable torx screw is included per order.

The gauge attaches to the pressure switch and is made of plastic and metal. It is an authentic OEM sourced item which is specially produced for use with compressors made by Porter Cable, DeVilbiss, and Black & Decker. This item is available as an individual replacement part. A wrench set may be helpful when replacing this part. This item may stop working and will need to be replaced.

Maintain a secure seal and optimal performance in your air compressor with this durable replacement gasket. Designed to fit at the cylinder head, this high-quality composite gasket helps prevent air leaks and ensures efficient operation. Over time, exposure to pressure and heat may cause the gasket to wear out or crack, making replacement...Read more necessary to keep your compressor running smoothly. Sold individually, this part is sourced from the original equipment manufacturer for reliable fit and function. For proper installation, refer to your model’s diagram to locate the correct placement.