C2002 Porter Cable - Parts

Genuine Porter Cable replacement part, this item is sold individually. Head Gasket Sold Separately. This part is used in the all of the compressors models listed below. When air is pumped by the piston it passes through the Valve Plate into the compressor tank. There are reeds on the valve plate that will eventually wear out, and the Valv...Read moree plate will need to be replace. It is advisable at this time to replace the Graphite Gasket Kit, part number D30139.

This is an Original Manufacturer Approved replacement part used on some Air Compressors. This Kit Includes: Cylinder Sleeve, Compression Ring, Piston Rod Cap Screw. This is the is a hollow, round cavity or chamber with smooth walls that houses the Piston.

This is an Authentic Manufacturer Sourced replacement part used on Air Compressors. The gauge registers pressure readings and allows you to maintain needed pressure. This Gauge is Sold Individually. You would need a Wrench to secure this Gauge to the Manifold. When replacing this item make sure to unplug the air compressor and bleed out air from the tank.

This is an authentic part that is intended to be used with air compressors from Porter Cable, Black & Decker, and Bostitch. This safety valve attaches to the switch box or the manifold, and is used to release air from the tank if the pressure becomes too high inside the tank. If the safety valve goes off it will need to be replaced, because it can not be reused. The safety valve is sold individually.

This is an authentic OEM sourced part that is intended to be used with air compressors from Porter Cable, DeWalt, DeVilbiss, and Black & Decker. The isolators connect to the bottom of the frame of the feet of the tank and are used to support the compressor. These items also absorb vibration between the ground and the tank. The isolators are sold in a kit of three and the hardware is included.

This is an original Porter Cable replacement part manufactured for use with air compressors. The rubber isolator is used to reduce vibration caused by the pump and motor. This isolator is sold individually.

This is an authentic item that is supplied directly from the original equipment manufacturer for use with air compressors. It is an identical replacement for damaged or missing cylinder head that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct application of this component. ...Read moreThis high-quality part is made of durable metal with plastic and is sold individually, keep in mind the gasket and the hardware are all sold separately.

This is an authentic OEM supplied replacement fan that is specially made for use with air compressors. This is the fan that connects to the pump. Please note, the hardware to secure this fan is sold separately. One plastic fan is included per order.

This replacement tube seal is designed to prevent air leaks and maintain efficient compressor performance. Sold individually, it fits securely onto the outlet tube that connects to the head of the compressor, ensuring a tight and reliable seal. Ideal for replacing worn or damaged seals, it helps restore proper airflow and pressure. Instal...Read morelation is simple and requires minimal tools, making it a quick fix for keeping your equipment running smoothly.