13AL Craftsman Lawn Mower - Parts

85 - 96 of 1453

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Plate-trim – Part Number: 698368
$26.95
Special Order
Plate-trim
Part #698368
Spring-valve – Part Number: 694865
$9.95
Special Order
Spring-valve
Part #694865
This valve spring is a genuine OEM Briggs & Stratton replacement used in small gasoline engines to maintain proper valve tension and timing during operation. It helps prevent valve float and ensures consistent intake and exhaust valve movement, making it an ideal replacement when worn or weakened springs cause power loss, noise, or poor engine performance.
Lock-piston Pin – Part Number: 698469
$8.95
Special Order
Lock-piston Pin
Part #698469
Spring-valve – Part Number: 691279
$10.95
Special Order
Spring-valve
Part #691279
This is available individually and is made of metal. The valve spring is part of the cylinder head. During the installation process, a set of pliers might be needed to replace this part. It will require replacing if it becomes broken. This is a genuine item that is supplied by the original equipment manufacturer for use with lawn tractors made by Briggs & Stratton, Toro, and Lawn Boy.
Link-choke – Part Number: 691840
$15.95
Special Order
Link-choke
Part #691840
A genuine item which is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines that are commonly installed on lawn and garden equipment. It is an identical replacement for a damaged or missing link-choke that was originally installed on a new unit. Make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually. You may need a screwdriver and pliers to take apart the housing to perform this repair.
Screw – Part Number: 690976
$7.95
Special Order
Screw
Part #690976
It is an authentic OEM sourced replacement part that is specially designed for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. This is one of the screws for the connecting rod, make sure to check appropriate diagrams of your model for correct application of this hardware. Please note this durable metal hex head screw is sold individually.
Washer-sealing – Part Number: 690997
$13.95
Special Order
Washer-sealing
Part #690997
This is an authentic replacement part manufactured for use with small engines. The sealing washer is commonly used to seal the connection between the float bowl and the float bowl float on nikki carburetors. This sealing washer is available as an individual replacement part, please see model diagram for associative parts.
Tube-dipstick – Part Number: 697085
$47.95
Special Order
Tube-dipstick
Part #697085
This part is an OEM from Toro. The dipstick tube is constructed of plastic, and is sold individually. This item secures the dipstick, and is compatible with many tractor and other outdoor engines. A screwdriver, socket set and wrench set may be necessary for the proper installation.
Reed-breather – Part Number: 697124
$13.95
Special Order
Reed-breather
Part #697124
This is a genuine Briggs and Stratton, Toro part for use with lawn and garden equipment engines. The crankcase breather valve opens to relieve pressure in the crankcase. The most common reason for replacing the breather is when the small engine runs poorly. This part is sold individually. Here is a list of tools that are needed to replace the breather valve a flat-head screwdriver, hammer, 7/16th-inch socket, 3/8th-inch socket or nut driver, Phillips-head screwdriver, 5/16th-inch socket or nut driver, 3/8th-inch socket or nut driver, pliers.
Screw – Part Number: 691108
$5.95
Special Order
Screw
Part #691108
This is an authentic OEM sourced replacement part that is intended to be used with lawnmower engines and outboard motors from Briggs & Stratton and Toro. The metal screw is used to secure the rocker cover to the cylinder head assembly. This item is available as an individual replacement part.
Nut – Part Number: 693148
$5.95
Special Order
Nut
Part #693148
Link-throttle – Part Number: 695238
$14.95
Special Order
Link-throttle
Part #695238
This throttle link is a genuine OEM replacement designed for small engine applications. It connects the governor mechanism to the carburetor, helping regulate engine speed for smooth, stable operation under changing loads. Made from durable metal for a precise fit, it’s an ideal replacement when worn or bent linkages cause fluctuating RPMs, poor throttle response, or inconsistent engine performance.
85 - 96 of 1453