13AL Craftsman Lawn Mower - Parts

73 - 84 of 1453

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Seal-governor Shaft – Part Number: 692407
$13.95
Special Order
Seal-governor Shaft
Part #692407
The governor shaft seal is sold individually and is made out of plastic. A screwdriver, a set of pliers, and a socket set might all be needed during the installation of this item. Over time this part may break and will need to be replaced. This genuine item is supplied by the original equipment manufacturer for use with lawn mowers, lawn tractors, and snowblowers made by Briggs & Stratton, Toro, Lawn Boy, and Murray.
Seal-o Ring – Part Number: 690988
$13.95
Special Order
Seal-o Ring
Part #690988
This is a genuine OEM sourced replacement o-ring which is utilized with Briggs and Stratton engines commonly installed on lawn and garden equipment. This component provides an air-tight seal for the fuel transfer tube, over time the material may become brittle and crack eventually requiring a replacement to ensure the proper seal. It is a high-quality component which is made of durable rubber and is sold individually.
Link-choke – Part Number: 691022
$14.95
Special Order
Link-choke
Part #691022
This is a genuine Briggs & Stratton replacement part. The choke link is designed by the manufacturer for use in lawn tractors and engines. This part is made of metal, and is used to connect the choke controls with the carburetor. You may require a wrench or screwdriver when replacing this item. This part is sold individually.
Spacer – Part Number: 691215
$12.95
Special Order
Spacer
Part #691215
Armature-magneto – Part Number: 591459
$96.95
In Stock
Armature-magneto
Part #591459
Hard starting or an engine that suddenly stops may point to a damaged magneto armature. This ignition coil turns magnetic energy from the spinning flywheel into the electrical pulse that fires the spark plug. First try a known-good spark plug and inspect the safety switches, grounding wire, terminals, and flywheel magnet. Confirm fit from the full engine identification numbers, since similar coils may mount differently. Work only with the engine off and cool. Disconnect the battery and spark plug lead before removing covers. During installation, use the air gap listed in the service manual and tighten the mounting screws evenly. Keep hands clear of the flywheel and use an insulated tester to check for spark.
Nut – Part Number: 690958
$5.95
Special Order
Nut
Part #690958
This is a genuine manufacturer-sourced component which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It provides an identical replacement for a missing or a faulty nut that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.
Gasket-float Bowl – Part Number: 690994
$11.95
In Stock
Gasket-float Bowl
Part #690994
This is a genuine manufacturer sourced replacement part that is specially designed for Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. The purpose of this gasket is to create an air-tight seal for the float bowl, over time it may deteriorate, become brittle and crack eventually requiring replacement to maintain peak performance. It is made from high quality rubber material and it is sold individually.
Bushing-gov Crank – Part Number: 690552
$14.95
Special Order
Bushing-gov Crank
Part #690552
This is an original part from the Briggs & Stratton manufacturer. The governor crank bushing is made of durable metal, and is designed for use with many lawn and garden engines. This part helps to secure the crankcase assembly. A set of pliers may be helpful in making the replacement. Please be sure to refer to the specific manual for repair instructions. This item is sold individually. However, it is included in the engine sump (796307).
Tappet-valve – Part Number: 690564
$17.95
Special Order
Tappet-valve
Part #690564
This valve tappet is a genuine OEM replacement designed for small engine applications. It plays a key role in proper valve operation by ensuring accurate timing and smooth movement, helping reduce internal wear and support consistent engine performance. Manufactured from durable materials for long service life, it’s an ideal replacement when worn tappets lead to noise, poor running, or reduced efficiency.
Arm-rocker – Part Number: 690972
$23.95
Special Order
Arm-rocker
Part #690972
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This is a high-quality replacement for a missing or damaged arm-rocker that was originally installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality component is made of durable metal and is sold individually.
Bolt – Part Number: 690311
$7.95
Special Order
Bolt
Part #690311
Stud – Part Number: 690951
$12.95
Special Order
Stud
Part #690951
73 - 84 of 1453