119905 Kenmore - Instructions

All Instructions for the 119905
106 - 120 of 155

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Wire broken off plug in block
0 of 1 people found this instruction helpful.
  • Robert from Phillipsburg, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed old block , cut off wires , used new wire nuts, heat shrink , supplied with parts , job done lowered range top went fishing ...
Was this helpful?
Thank you for voting!
Burner Would Not Heat
0 of 1 people found this instruction helpful.
  • David from Toledo, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
One screw taken out, 2 wires switched, new part & screw put in. Burner like new!
Was this helpful?
Thank you for voting!
Wire broken going to one electric plug for burner
0 of 1 people found this instruction helpful.
  • John from Shelby Township, MI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Replace the connector and bracket, spliced the wires, put heat to the schrink wrap and I was done.
Was this helpful?
Thank you for voting!
no heat from burner
0 of 1 people found this instruction helpful.
  • George from ST. Charles, MO
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I raised the stove top, read the instructions to my son while he did the work, then I lowered the stove top, installed the burner, and it worked like magic.
Was this helpful?
Thank you for voting!
replace burner coil connector
0 of 2 people found this instruction helpful.
  • dicky from mcrae, AR
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Cut the two wires approx 1 inch behind old connector and removed one screws to remove old connector, stripped approx 3/4 inch off the wires and connected them to the new wires on the new connector with wire caps and shrink wraps which came with the new connector. Replaced the old screw with the new screw and the job was completed. Be su re and disconnect power before starting!!
Was this helpful?
Thank you for voting!
large burners not working
0 of 2 people found this instruction helpful.
  • Greg from Versailles, IN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Read instuctions first Turn breaker off to stove or unplug to be sure. Remove burner and drip pans. Remove scews holding socket in place if you are doing more than one make sure you keep in same location. Raise cook top untill supports latch in. Assemble plug it comes with two types holder compare to your plug. cut wire to old plug so yo u have enough wire to connect back with new. Strip wire back and place shrink tubeover wires wire nut together heat with a lighter or heat gun then do remaining plugges. place back in cover and replace scews. make sure wire are not to long to get under burner when cook top lowered. Lower cook top and clean burner plug ends with a little sandpaper to make sure they make good connection. replace pans and burner. turn on breaker or plug in stove making sure the burners come on when turned on good luck g.d.
Was this helpful?
Thank you for voting!
rusty bowls
0 of 2 people found this instruction helpful.
  • Monty from Kenton, OK
  • Really Easy
  • Less than 15 mins
very easy
Was this helpful?
Thank you for voting!
Intermittent heating element function
0 of 2 people found this instruction helpful.
  • Jeffrey from Pittsburgh, PA
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Instructions included with terminal block assembly. Toughest part was to strip the insulator off of the old wires on the stove. I was originally going to just purchase one but after looking at the other terminal blocks and seeing the burnt insulation and some of the wire strands, I just replaced all 4. PartSelect customer sevice was ve ry helpful to confirm the correct part number I needed for my stove.
Was this helpful?
Thank you for voting!
Renewed drip pans
1 of 6 people found this instruction helpful.
  • Frank from Winter Garden, FL
  • Really Easy
  • Less than 15 mins
Replace the old ones with the new ones. Was VERY impressed with the quick delivery!!
Was this helpful?
Thank you for voting!
heating elements not working
1 of 7 people found this instruction helpful.
  • christopher from cincinnati, OH
  • Easy
  • Less than 15 mins
  • Pliers
prepared the parts as directions displayed, removed the heating coils and popped the hood on the range, simple curcit 2 wires in to the main harness for each coil. snip, plug and twist add heat wrap to seal the new conections and done very simple fix saved me buying another oven....for now
Was this helpful?
Thank you for voting!
Control will not work - only clock blinks
0 of 4 people found this instruction helpful.
  • Sue from Lampasas, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Took 3 panels off to get to the electric block. Replaced electrical block and put it back together. Still no change.
Was this helpful?
Thank you for voting!
Left hinge broke in pieces
  • Marilyn from Yonkers, NY
  • Really Easy
  • 15 - 30 mins
  • Wrench (Adjustable)
First I read other comments here; then checked youtube.com to see if there was a video - there was! Easily removed the stove door and the storage drawer to access the spring. Removed the spring and used screwdriver to remove 2 of 3 screws - third had a nut on back which required removal of the decorative panel next to the door. After appl ying Liquid Wrench, was able to use vise-grip to remove last bolt. Inserted new hinge, attached the spring to hinge and stove frame then inserted the 3 screws. Reattached the decorative panel and was done. Repklaced a hinge, not a stove!!!
Was this helpful?
Thank you for voting!
Three terminal blocks burned out (disintegrated) on electric stove
  • Valentina from Riverside, CA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
First I want to thank Part Select for having the video online or I would not have attempted the repair. Also I saved over $75 on the parts!!!!!! It would have cost me $105 for parts and $125 for service tech to replace the burned off terminal blocks with new ones. Parts cost me $35 with shippiing, I did the repair saving me $195 !!!!!!!!! I replaced the parts as describied in the video and all is well. By the way, I got the parts in less than 24hours after ordering, cheaper than driving 30 miles to pick up overpriced parts !!!!
Was this helpful?
Thank you for voting!
Replace terminal block and burner unit.
  • James from Williamsville, VT
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Very simply following the online video instructions.
Was this helpful?
Thank you for voting!
Oven door hinges broken on range
  • Ross from Bridge Hampton, NY
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
First off I want to thank Parts Select for getting the parts to me with-in 24 hours. This is incredible, I effected the repairs with-in 45 minutes thanks to the instructions I found on your site. As a result of Parts Selects web site I think I can handle any appliance repair going forward. Many thanks Ross,
Was this helpful?
Thank you for voting!
All Instructions for the 119905
106 - 120 of 155