119905 Kenmore - Instructions

All Instructions for the 119905
121 - 135 of 155

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
two of the burners were working intermittently
  • Kevin from Desoto, MO
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I shut off the breaker checked for power then cut old plugs making sure to allow a little slack. Tightened down wire nuts put on a couple wraps of electrical tape and that was it. Burners work great now I would reccomend this product to anyone with a similar problem.
Was this helpful?
Thank you for voting!
Burners did not get hot or went on and off
  • Boyd from kalamazoo, MI
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
After carefully inspecting existing burner receptacles, I unscrewed them, raised and propped stove top. Determined which bracket to use from new kit and proceeded to cut and strip wires, twist ends together with supplied ceramic caps and heated shrink wrap on that junction. Works great. BTW got parts in 2 days in great shape and good dir ections.
Was this helpful?
Thank you for voting!
Top element not heating
  • Mary from Montgomery, AL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Ordered wrong part at first caused me to blow out two elements. With the help of PartSelect I was able to get the right surface block terminal and replaced both of them, then found out I had a bad switch, they got the switch within 2 days I had my stove working good again. Thanks to PartSelect. Also watched the video which was very helpf ul ML
Was this helpful?
Thank you for voting!
The surface burner socket that the burner plugs into melted.
  • Gary from Chesapeake, VA
  • Easy
  • Less than 15 mins
  • Screw drivers
Cut the old wires off, removed the screw holding the clamp, installed the new parts. Problems I encountered were the wire nuts. They were too small for the wire gage of the replacement part and the original oven. I had larger wire nuts in my workshop. Also, why so many extra parts like the shrink wrap tubing, two metal clamps to hold t he socket, etc.
Was this helpful?
Thank you for voting!
Burner keep coming on and going off had a short in burner plug-in block.
  • Judith from Staunton, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Turned off stove breaker. Unscrewed burner from stove top, took out burner and spill pan. Lifted top of stove, cut the wire as instructed and put all parts together as instructed. Placed everything back together as instructed. I did it myself!
Was this helpful?
Thank you for voting!
Burner was slow heating at times. Moved back burner to front still same thing.
  • Gail M from Lockport, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Unscrewed screw holding bracket. Used side cutters to cut wires. Replaced the bracket, put the shrink wrap on wires, twisted wires together and held with wire caps. Shrunk the wrap with lighter. I'm a 67 year old female.. No problems.
Was this helpful?
Thank you for voting!
Plug block was broken
  • Mark from Hillsboro, OR
  • Easy
  • 15 - 30 mins
  • Screw drivers
I removed the entire burner assembly to avoid having to turn things off at the breaker - the whole assembly can be removed completely from the stove I had. Once it was out and disassembled, the toughest part was putting the new wires into the new block correctly. Once that was done, I had to select the right mounting bracket - there were 2 in the kit. Easy, just attention to detail. The rest of the instructions were easy to follow, re-doing the wires. The re-assembly was trivial, and it worked first time!
Was this helpful?
Thank you for voting!
stove burner no longer would heat up burner element
  • Bonnie from Price, UT
  • Easy
  • 15 - 30 mins
  • Screw drivers
I removed the burner element, then the drip pan. I took off the old block. Then I had to strip the old wires. Then I put on the heat sleeve, then attached the new wires to the old wires with nuts. Put heat sleeve over this and heated with lighter. Then put everything back together.
Was this helpful?
Thank you for voting!
Range top burner wouldn't work
  • Evelyn from Perryville, MD
  • Really Easy
  • Less than 15 mins
Got new surface element. Unplugged the old element, plugged in the new surface element, turned the stove top on, and it worked! Took less than 5 minutes and I'm pleased! Will probably or the same two so all my elements are nice and new. Great experience.
Was this helpful?
Thank you for voting!
Drip Bowl Replacement
  • Jennifer from Arena, WI
  • Really Easy
  • Less than 15 mins
I could not find the larger size universal drip bowl to fit the 8" burners on my stove. This product replacement is perfect.
Was this helpful?
Thank you for voting!
burner not comming on
  • raymond from Wilbur, WA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
unpluged stove pulled offback of stove behind buner controles took knob off burner switch took off two screws switchout put new switch in then took wires one at a time off and put on new switch put backon pluged in it worked
Was this helpful?
Thank you for voting!
Surface Element burnt out
  • Vicki from Strong, ME
  • Really Easy
  • Less than 15 mins
Lift stove top cover up and support cover so it will not fall down unplug element put new one in close cover and turn burning on and watch the burner get red hot. simple job why call a repair man in. Vicki
Was this helpful?
Thank you for voting!
Couldn't find drip pans that fit
  • Heather from Springfield, TN
  • Really Easy
  • Less than 15 mins
I went to all of the do-it yourself stores and spent a bunch of money on aftermarket drip pans only to find out that none of them fit. I came up on your website and also called customer service. The found the right part and mailed it too me. They fit perfectly. No more burnt and rusty drip pans. I know where to go for parts now.
Was this helpful?
Thank you for voting!
Replace ill-fitting drip pans
  • thomas from cleves, OH
  • Really Easy
  • Less than 15 mins
After two failed attempts to get the 'correct' drip pans for my range from two other supply outlets, Part Select had the proper drip pans for this model. They fit perfectly! Simple installation and threw away those cheap, poorly fitting replacement pans I've put up with for three years! Thanks Part Select for having the correct parts!!
Was this helpful?
Thank you for voting!
Rusted out drip bowls
  • Shelley from Chillicothe, MO
  • Really Easy
  • Less than 15 mins
The parts came quickly. I removed old drip pans and snapped the new ones into place. A child could do this. Now my cooktop looks new and I am not ashamed for anyone to see it.
Was this helpful?
Thank you for voting!
All Instructions for the 119905
121 - 135 of 155