1151 - Instructions

All Instructions for the 1151
31 - 45 of 99

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drip Pans were stained and burned on.
1 person found this instruction helpful.
  • Sandra Collignon from SANTA CLAUS, IN
  • Really Easy
  • 30 - 60 mins
Replaced drip pan. Notch did not want to match the burner notch. Was a close fit bit with a little pressure made it work.
Was this helpful?
Thank you for voting!
Jennair cooktop with coils lost one of its coil guides.
1 person found this instruction helpful.
  • Bruce from SOUTHBURY, CT
  • Really Easy
  • 30 - 60 mins
  • Socket set
We bought the replacement Ceramic plug and wires, and opened up the jennair cooktop piece and rewired the NEW coil guide into the system. It works great.
Was this helpful?
Thank you for voting!
Surface Element switch faulty with no control on heat
1 person found this instruction helpful.
  • Ramiro from AUSTIN, TX
  • Very Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Turned power completely off. Removed knob from front panel. Opened range top cover. Removed 3 screws from aluminum panel protector behind the element switch. Once panel is removed you can see the switch element. Remove 2 screws from the front panel that connects to the element switch. Remove the old element and replace with new element ma king sure that each of the 5 wires on the old element is transferred one by one to the new element. Reverse the process in putting it all together. Turn on the power and walla you've have a new stove. You just save $600 plus.
Was this helpful?
Thank you for voting!
burner receptacle failed (stove over 30 years old)
1 person found this instruction helpful.
  • BETH from COUNCE, TN
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Took out burner (pulls out) Took out one screw that holds recep. in, cut the two old wires and attached new wires with wire nuts included in the new package.
Was this helpful?
Thank you for voting!
Couldn't find correct drip bowls that fit.
2 of 4 people found this instruction helpful.
  • Lowell from Hardin, KY
  • Really Easy
  • Less than 15 mins
Removed old drip bowls, removed burners installed new drip bowls,installed burners. They fit perfect and I received them two days after ordering.
Was this helpful?
Thank you for voting!
The old drip bowls were rusting, no chrome left
3 of 7 people found this instruction helpful.
  • kathryn from piqua, OH
  • Really Easy
  • Less than 15 mins
Took the old ones out and put in the new ones! What I am so pleased about it that I just went online and at Parts Select website it was easy to find what I needed, a fair price and the 4 bowls arrived within 2 days!
Was this helpful?
Thank you for voting!
replacing old drip bowls
1 person found this instruction helpful.
  • Marion J. from Palmetto, FL
  • Really Easy
  • Less than 15 mins
It was so simple & the parts fit perfectly. I appreciated all the help from your sales lady. Thanks again.
Was this helpful?
Thank you for voting!
Just needed new drip pans for burners
1 of 2 people found this instruction helpful.
  • Ann from Cadiz, KY
  • Really Easy
  • Less than 15 mins
Was glad to get the correct ones for a 30 year old stove. Had already wasted $12 shipping trying to order from someone else.
Was this helpful?
Thank you for voting!
drip-bowls wore out
1 of 2 people found this instruction helpful.
  • Ronald E from Rochester, NY
  • Really Easy
  • Less than 15 mins
i read the installation instructions and followed them. first i made sure that each heating element was off. next i carefully removed each one (a total of 4) from it's plug and lifted the worn out drip-bowl up and replaced it with the new one. finally i pluged in (a total of 4) heating elements and turned them on to make sure them were wo rking and they did.
Was this helpful?
Thank you for voting!
Simple - needed to replace the drip pans on the stove between tenants in a rental apartment
1 of 2 people found this instruction helpful.
  • Tama from Pacific Grove, CA
  • Really Easy
  • Less than 15 mins
This wasn't much of a repair -- rather a replacement of a simple abused part. At the same time, PartSelect allowed me to order what I needed after two failed attempts to buy replacements that would fit the range. I'll remember PartSelect if we need parts for other older appliances in the rental units.
Was this helpful?
Thank you for voting!
Burners needed replacing
1 of 2 people found this instruction helpful.
  • Alene from INDIANAPOLIS, IN
  • Very Easy
  • Less than 15 mins
Pulled out the old burners and put in the new ones.
Was this helpful?
Thank you for voting!
Drip pans were old and with burnt on food that I couldn't get off. Disgusting!!
1 of 2 people found this instruction helpful.
  • Nicki from ELSIE, NE
  • Very Easy
  • Less than 15 mins
No problem Took off old ones and replaced with new.
Was this helpful?
Thank you for voting!
Drip pans needed to be replaced
1 of 2 people found this instruction helpful.
  • Mark from ROSENBERG, TX
  • Very Easy
  • Less than 15 mins
1) removed heating elements. 2) removed drip pans. 3) installed new drip pans. 4) reinstalled heating elements
Was this helpful?
Thank you for voting!
My drip pans were in bad shape
2 of 5 people found this instruction helpful.
  • Sandra from Oldsmar, FL
  • Really Easy
  • Less than 15 mins
I removed the old and repaced with new. I never ordered anything one day and got it the next. I'm impressed
Was this helpful?
Thank you for voting!
drip bowls rusted i replaced them
1 of 2 people found this instruction helpful.
  • glen from stamford, CT
  • Really Easy
  • Less than 15 mins
remove elements and replace bowles
Was this helpful?
Thank you for voting!
All Instructions for the 1151
31 - 45 of 99