1151 - Instructions

All Instructions for the 1151
76 - 90 of 99

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
I needed to replace to two 8* drip bowls on the kitchen range
  • Dallas from Arlington, TX
  • Really Easy
  • Less than 15 mins
(a) I took out (and threw away) two stained 8* chrome drip bowls on my kitchen range; (b) ti put in two new 8" chrome drip bowls on my kitchen range. I'm pleased that I was equal to the task.
Was this helpful?
Thank you for voting!
Stove needed new bowls
  • Karen from Kettering, OH
  • Really Easy
  • Less than 15 mins
Just dropped in
Was this helpful?
Thank you for voting!
Old dirty drip pans
  • gizella from mays landing, NJ
  • Really Easy
  • Less than 15 mins
Removed heating element, installed new drip pan, replaced heating element. Was amazed at fast delivery - ordered in afternoon, arrived fed ex next morning!
Was this helpful?
Thank you for voting!
Burner no longer connected with electric power source
  • Barbara from Pacific Palisades, CA
  • Really Easy
  • Less than 15 mins
I had determined that the the burner itself was no longer capable of connecting because when I removed another burner and inserted it, it worked just fine. Also, the defective burner had not worked when inserted into another outlet. I was delighted to be able to purchase a replacement so quickly and easily on my own, without having to cal l a repair person or seek a retail outlet.
Was this helpful?
Thank you for voting!
The drip pans needed replacing.
  • Alison from Carnation, WA
  • Really Easy
  • Less than 15 mins
Put in the new drip pan -- which are really nice shiny ones.
Was this helpful?
Thank you for voting!
Dirty drip bowls
  • Paul from Carnegie, PA
  • Really Easy
  • Less than 15 mins
Just remove old bowls from range top and put new ones. That is all ... just super simple! :)
Was this helpful?
Thank you for voting!
Dirty drip bowl
  • Paul from Carnegie, PA
  • Really Easy
  • Less than 15 mins
Remove old drip bowl from the range and put a new one back.
Was this helpful?
Thank you for voting!
I wanted to purchase new drip pans, since those that I have are a bit grimy
  • Hedy from Richmond, VA
  • Really Easy
  • Less than 15 mins
I will begin by saying that not only will I continue to order my parts from PartsSelect, but I also highly recommend this business. If you call Whirlpool be careful that they forward your call for parts to some preferred vendor, which a customer might assume is Whirlpool but it is not. PartsSelect is the same type of business, but wit h outstanding customer service. With regard to the drip pan, Whirlpool had not updated the part number for these as I found out when i called them. Whirlpool no longer uses the drip pans without the holes which is a serious problem since this could be hazardous to the owners of these ranges if you are forced to purchase the drip pans with the holes in them. That said, I ended up keeping my old drip pans, because if you spill grease under the new ones with the holes in them and since the range design with the fan built in on the top does not allow you to lift the top to clean under the pans, you could end up with a grease fire. This is not the fault of PartsSelect and they handled my order in a manner that I would give them a rating of exceptional for customer service.
Was this helpful?
Thank you for voting!
The surface burner element burned out on my 20 year old Jenn Air electric stove.
  • Wanda from Riverton, WY
  • Really Easy
  • Less than 15 mins
It was so easy to order a new one from your company. And it arrived in less than a week! I slipped it into the electric outlet and it worked perfectly. THANKS. Wanda Major
Was this helpful?
Thank you for voting!
Burner coil was falling apart.
  • Mary Kay from North Charleston, SC
  • Really Easy
  • Less than 15 mins
Used new plug in coil burner.
Was this helpful?
Thank you for voting!
heating coils would not work
  • Adam from Kempner, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Remove heat coils, take body of coil inserts out, remove screws from body, cut old receptacle out, tie new recptacle wires to the old piece of left over wires using wire nuts, and reassemble body, insert heating coils and test.
Was this helpful?
Thank you for voting!
Burner did not heat
  • lula from Antelope, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
New receptacle element. I am a girl and I did it.!!!!
Was this helpful?
Thank you for voting!
replacement of heating element for elec. stove
  • Erica from Ivyland borough, PA
  • Really Easy
  • Less than 15 mins
plugged it in to the spot where missing element was.
Was this helpful?
Thank you for voting!
Two old Surface Burner Receptacles needed to be replaced.
  • Willis from Anaheim, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I followed the instructions given on your great site. Thank you so much.
Was this helpful?
Thank you for voting!
Need new Surface Burner Knobs
  • Robert from Houston, TX
  • Really Easy
  • Less than 15 mins
Just pulled the old off and pushed the new ones on.
Was this helpful?
Thank you for voting!
All Instructions for the 1151
76 - 90 of 99