All Installation Instructions for Kenmore Dryer 110C61112010

no heat after 20 min.

removed top plate on rear of dryer. removed timer and replaced wires one at a time and new timer

Parts Used:

June from Hinsdale, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Lint filter was broken

Tried to replace filter would not fit It was delivered outside and was real cold and stiff after I let it set for awhile it warmed up it fit great. Thank you Calvin

Parts Used:

LINT SCREEN ASSY, WOD

Calvin from Saco, ME
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

The clip that holds the plastic handle to the lint screen broke off.

The new lint screen fit perfectly. All I had to do was slip it in the lint filter slot.

Parts Used:

LINT SCREEN ASSY, WOD

Pat from Zebulon, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

lint screen was worn and not working properly

removed old screen and replaced with new one.I would like to add that PartSelect was the only place i could find the part at a reasonable price, and that it was delivered in record time.

Parts Used:

LINT SCREEN ASSY, WOD

John from Billerica, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

old filter broke

took out old put in new

Parts Used:

LINT SCREEN ASSY, WOD

Ellen from Burlington, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Lint filter handle broke

Slid the new lint filter into slot on top of my 26 year-old Kenmore dryer and it fit perfectly! Ordered part and received it the next day...unbelievable!! Definitely A+ service.

Parts Used:

LINT SCREEN ASSY, WOD

Joan from Dudley, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Replaced lint filter

The part was delivered when promised. Part was a perfect fit. I was very pleased with the entire process.

Parts Used:

LINT SCREEN ASSY, WOD

Robert from Palatka, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Lint Filter mesh was frayed.

Purchased a new lint filter. Delivery and installation were no problems. The easiest repair that I've ever done.

Parts Used:

LINT SCREEN ASSY, WOD

Christian from Battle Creek, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

The old lint screen was torn and in need of replacement

The replacement that was ordered was a perfect fit for the worn part and merely required placement into the lint screen area. The entire procedure, from ordering the part, to installation was amazingly easy. I would not hesitate to order future parts from PartSelect.

Parts Used:

LINT SCREEN ASSY, WOD

Bruce from Wyncote, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

old lint filter was broken

All I had to do was take out the broken filter and replace it with the new one. It fit perfectly. The replacement took less than 5 minutes. I should have done it a year ago!!

Parts Used:

LINT SCREEN ASSY, WOD

John from York, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Dryer Stopped Working

Very easy, takes 5 minutes of your time. Actually I replaced my stop-start switch and also the timer. First make sure that you unplug the dryer. Using a 1/4" nutdriver unscrew the nuts holding on the back plate, once that is accomplished unscrew the two nuts that holds the switch and take care to unplug the wires on the switch and plug them onto the new switch, bolt the switch back on and replace back plate, and plug in power and presto you are back in business. The most important thing to keep in mind is when you take a wire off the terminal on the bad part that you swap it to the new one and keep doing that till you have them all switched to the new part. I had to pay a service tech $75 to tell me what was wrong with the dryer, ordered part and it came in 2 days. They wanted to charge me $275 to replace the part and it only took me 5 minutes to replace the part.

Parts Used:

Push-to-Start Switch

Kevin from Wauseon, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Lint screen broken

Open box, insert lint screen!

Parts Used:

LINT SCREEN ASSY, WOD

Peggy from Kingsbury, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Broken part

Replaced the part. It just slid right in to the appropriate space on the dryer.

Parts Used:

LINT SCREEN ASSY, WOD

Cassandra from Chicago, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Timer on dryer wasn't working properly...shut off to soon

Easy as pie! Unscrewed old timer, replaced new timer, then removed the wires from the old and applied to the new! Replaced the cover and done! Works like a charm!

Parts Used:

Timer