110C61112010 Kenmore Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Automatic dry setting worked but no heat on time dry setting
Replacing the timer fixed this problem. In the center of the timer there is a socket that was hard for me to remove. I had to use a small standard screw driver to push down the middle center plastic piece while someone else was gently pulling on the socket.
Parts Used:
-
Veda Jean from Sedilia, CO
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
dryer would not heat up consistently, if at all on any cycle.
Remove all plugs and connectors off of the old timer and reinstalled and mounted the new timer
Parts Used:
-
howard from hamlet, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!