110C6 Kenmore Dryer - Parts

This is a replacement bearing ring kit for your dryer. The bearing rings are found on the top and bottom lips of the dryer drum. If your dryer is unusually noisy, or the drum will not turn during operation, or if there are marks left on your clothes after a cycle, you may need to replace the bearing ring kit. The kit comes with 2 bearings...Read more, one for the top and one for the bottom of the dryer drum. Remove the front panel of your dryer to access the dryer drum for this repair. At this point you can use a pair of needle nose pliers to release the old bearing rings from the drum. Snap the new bearing rings on, and reassemble the dryer to complete your repair.

This is a 4-terminal switch.

This authentic OEM high limit thermostat is made for your dryer. It is an important dyer element, because it will automatically shut off the heating element when it overheats. Be sure to disconnect the power to your dryer before you begin this repair.

This dryer motor pulley is a genuine OEM replacement part designed for select dryer models. It connects to the motor shaft and supports the drive belt, enabling smooth rotation of the drum during operation. A worn or damaged pulley can result in squealing, grinding noises, or inefficient drum movement. Replacing the pulley can restore pro...Read moreper function and reduce noise. Always verify your appliance’s model number before purchasing to ensure compatibility. Installation may require basic tools and safety precautions, including disconnecting power before beginning the repair.

This part creates a seal around the door. High temperature adhesive is included.

This screw is sold individually.

Includes high temperature adhesive.

The thermal cut-off (fuse) is meant to trip at a higher temperature than that of a high limit thermostat. This is a one time use fuse, so when it does trip, you must replace it. The hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this piece will shut down power to the heating element.

Sold individually.

This part is the replacement motor pulley for your dryer. The motor pulley allows the dryer belt to run straight while the dryer is operating. If your motor pulley is damaged, your dryer may not tumble, and may not start altogether. A damaged motor pulley can also damage the dryer belt, and it may need to be replaced as well. Be sure to d...Read moreisconnect power from the dryer before you begin this repair. This motor pulley is a genuine OEM part sourced directly from the manufacturer.

This shaft is for the front with right hand thread. Sold individually.