110C6 Kenmore Dryer - Parts

This kit is used for electric clothes dryers, and it comes with a yellow wire nut.

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

If your dryer isn’t heating up or takes forever to dry clothes, this heating element might be the fix. It’s a complete assembly with the coil, housing, and insulators, made to fit many popular dryer models. With 5000 watts of power and a 240-volt rating, it helps your dryer work like new again. Just check your model before ordering to make sure it fits.

This is a genuine OEM part. The push-to-start switch is composed of metal and plastic components. Compatible with dryers, the Whirlpool switch powers the appliance after the button is pressed. With a screwdriver, this item is fitted between the bracket and console. The push-to-start switch is sold individually.

The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over time. But if it's noisy, it may simply be clogged with lint. Clean the blower and test to see if the dryer is still noisy. If it is, you probably need to replace it.

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

If your dryer is taking longer to dry clothes or feels like it’s losing heat, the door seal might be the problem. This flexible, heat-resistant gasket wraps around the door opening to keep hot air in and cold air out. It helps your dryer work faster and more efficiently, saving energy and time. Replacing an old or cracked seal is a simple way to improve performance and avoid safety issues from air leaks.

Ensure your dryer operates smoothly with this replacement door catch, which helps keep the door firmly closed throughout each cycle. It’s compatible with various models and replaces older versions. Common signs that this part needs replacing include a door that won’t latch properly or opens unexpectedly during use. Installing a new catch is a quick fix that improves both safety and efficiency.

This white female door catch is attached to the dryer door.

Sold individually.

Shaft for dryer drum support roller. Rear shaft with left hand threads. Part is updated so nuts may need to be replaced as well on older dryers.

This seal comes with the adhesive backing.