110897 Kenmore Dryer - Instructions

All Instructions for the 110897
121 - 135 of 275

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
delivery of part over 10 days, fedex rescheduled delivery 3 days in a row.
1 person found this instruction helpful.
  • David from MONTPELIER, IN
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I closed breaker to dryer. I removed the two screws attaching the lent catcher to the top. I used the putty knife to release the latch on the top of dryer while moving the top forward I was able to lift the top. Now I am waiting on the new door switch before proceeding with replacement. The completion should take another ten minutes.
Was this helpful?
Thank you for voting!
dryer would not power off when i opened the dryer door.
1 person found this instruction helpful.
  • john from JACKSONVILLE, FL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
removed two screws from filter acess and raised top of dryer to acess switch, easy remove and replace, thanks.
Was this helpful?
Thank you for voting!
Dryer was making a loud rattling noise and shaking
1 person found this instruction helpful.
  • Lindsey from Lancaster, PA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Wrench (Adjustable)
I watched the part select you tube video that links specific loud dryer noises to specific broken or loose parts. It allowed me to identify the part I needed, which I ordered through their website. Two days later, I had the part and installed it, with help from another online video that showed me how to take the dryer apart to install the drum support roller. Thank you, the information provided made the repair quite easy. It works perfectly now!
Was this helpful?
Thank you for voting!
Kept running with door open.
1 person found this instruction helpful.
  • Mark from NORTH READING, MA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Replaced switch very easy to do.
Was this helpful?
Thank you for voting!
door would stay closed
1 person found this instruction helpful.
  • william from KILLEEN, TX
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
just replaced parys
Was this helpful?
Thank you for voting!
dryer wouldn't stop when opening door
1 person found this instruction helpful.
  • Edward from FRENCHBURG, KY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
removed two screws in dryer vent released the catches on the top removed the two screws holding the switch releases the wire holder unplugged the wire and reversed the same putting back a peace of cake and part select very fast shipment
Was this helpful?
Thank you for voting!
Dryer would not start. After first replacing a spare Dryer Thermal Fuse I had it tripped again due to overheating. I then ordered a replacement Dryer Thermal Fuse as well as a cycling thermostat after determining the thermostat was no longer regulating the dryer's temperature.
1 person found this instruction helpful.
  • Mark from BLOOMFIELD, CT
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Watched the videos for the repairs on the site. Took the back of the dryer off after unplugging the appliance. Removed the failed fuse and thermostat and replaced them both per the video steps. It took about 25 minutes for both parts and the dryer now works well.
Was this helpful?
Thank you for voting!
Dryer door wouldn't catch and stay shut
1 person found this instruction helpful.
  • Melody from TEXARKANA, TX
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I take the screws out of the door, I removed the catch from behind inside the dryer door, I slid the new catch in the door and snapped it in place. After getting a new catch in the door I put the door back together and put the screws in. Easy repair
Was this helpful?
Thank you for voting!
broken belt
1 person found this instruction helpful.
  • William from Newport, VT
  • Easy
  • 15 - 30 mins
  • Nutdriver, Socket set
removed two screws from lint screen raised top removed two nut screw from front disconnected lid wire lifted front up and off removed drum cleaned all dust out replaced pulley unit with new one (with a wheel) replaced tub held it up with a bungey cord put on new belt and reassembled unit tested out back in busine ss
Was this helpful?
Thank you for voting!
Dryer was making all kinds of noises
1 person found this instruction helpful.
  • Noel from N BRANFORD, CT
  • Easy
  • 30 - 60 mins
  • Nutdriver, Socket set
After checking out the website and the videos posted to YouTube, I decided that I should take a chance and try and repair the problem myself. I am not in any way mechanical, and for me personally, this was a huge job. The instructions and the video were so clear that it made the job easy. Taking out the dryer drum was a concern, and altho ugh not heavy, I used a friend to hold it in place when I was putting it back together. My only small issue was when I was removing the rollers. I had some difficulty taking off the plastic locking washers but other than that, it was a breeze. The videos posted are great and very easy to follow. While doing the above job, I also replaced the dryer belt and heating element, both of which I followed instructions as per video. The dryer is running very smooth, and is the quietest it has been for many years. Very happy with all aspects of service advice and videos.
Was this helpful?
Thank you for voting!
Noise in dryer when dryer was turned on
2 of 4 people found this instruction helpful.
  • Michael from Marion, KY
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set, Wrench (Adjustable)
Removed the drum then removed the old parts and installed the new ones. Dryer now runs very quite and heats good. You have very fast service my mother ordered the parts on the net one day and I received the parts next day and did the repair that night and dried clothes. Thanks,

Your great service is very hard to find.
Was this helpful?
Thank you for voting!
Moisture sensor dislodged
6 of 16 people found this instruction helpful.
  • wpeter from boca raton, FL
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Pliers
From the front, taped part in place and then assembled springs and insulator from the rear. Difficulty occurred with access to the back of the sensor due to the air duct interference. The sharp edges of the sheet metal parts increases the risk of cuts. First shipment was missing the second electrode but Part Select immediately replaced th e shipment. My experience has to be considered Excellent and I would go to Part Select first for my next order.
Was this helpful?
Thank you for voting!
Dryer was making a lot of noise while running.
3 of 7 people found this instruction helpful.
  • Ramon from Los Angeles, CA
  • Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers
After identfying that the problem was due to a damaged drum support roller, I decided to replace the bad roller instead of replacing the dyer itself.

The first thing was to remove the front cover
and the front panels to expose the drum. (Only a few screws hold them in place.) Next, the drum was removed by first releasing t he belt from the motor pulley and tensioner, and then pulling the drum straight out.

At this point the two rollers would be exposed. The triangular plastic retaining locks were removed by slightly prying them off. The old rollers were then removed and replaced.

Before putting everything back, this was a good time to vacuum all the accumulated lint inside, especially the lint that had accumulated around the motor assembly and the fire box.

(A pleasant surprise: I found a lot of coins inside the unit, enough to recoup half of what I spent for the new rollers.)
Was this helpful?
Thank you for voting!
More Dry setting does not work
2 of 5 people found this instruction helpful.
  • c from vestavia hills, AL
  • Easy
  • 30 - 60 mins
  • Nutdriver
Repair was not successful
Was this helpful?
Thank you for voting!
loud noise
1 of 2 people found this instruction helpful.
  • emamoudeen from south ozone park, NY
  • Really Easy
  • 15 - 30 mins
  • Socket set
very smooth with your video instruction help
Was this helpful?
Thank you for voting!
All Instructions for the 110897
121 - 135 of 275