110897 Kenmore Dryer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door would not stay closed - so dryer kept shutting off
1 person
found this instruction helpful.
-
Barbara from NORTH EASTON, MA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Followed Youtube video - quick & easy
Was this helpful?
Thank you for voting!
Broken dryer door catch
1 person
found this instruction helpful.
-
Kenneth from UPPR MARLBORO, MD
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Followed the video instructions which were comprehensive, easily understood, and prefaced with a listing of necessary tools. Completely satisfied with parts and supplementary information.
Was this helpful?
Thank you for voting!
broken door catch
1 person
found this instruction helpful.
-
Susan from HUDSON, MA
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
I followed your short video and found it very easy to do
Was this helpful?
Thank you for voting!
Dryer drum wasn't turning
1 person
found this instruction helpful.
-
Carrie from PLAINFIELD, IL
- Really Easy
- Less than 15 mins
-
Screw drivers, Wrench (Adjustable)
Found the belt was broken and the pulley wheel had melted, replaced the belt and the pulley, could not have been simpler. Watched the video on how to repair and in less than 15 mins was fixed. Saved a lot of money by doing it myself.
Was this helpful?
Thank you for voting!
Dryer wouldn’t stop spinning/2weeks later didn’t turn on at all
1 person
found this instruction helpful.
-
Theresa from STOCKTON, CA
- Very Easy
- Less than 15 mins
-
Screw drivers
Lift up top portion of dryer inside the front wall is the electrical part which attaches to the door switch
Was this helpful?
Thank you for voting!
The door whould not close enough for the dryer to work.
1 person
found this instruction helpful.
-
Frank from Union Beach, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
Got my parts very quickly.
Popped out the old door latch with a screw driver and pressed in the new one.
Very simple.
Thanks Parts Select.
Popped out the old door latch with a screw driver and pressed in the new one.
Very simple.
Thanks Parts Select.
Was this helpful?
Thank you for voting!
dryer door won't stay shut
2 of 4 people
found this instruction helpful.
-
Diana from Canfield, OH
- Easy
- Less than 15 mins
-
Pliers, Screw drivers, Wrench (Adjustable)
I replaced the male end first hoping that a change in the female part would not be needed. Unfortunately no. I used needle nosed pliers to pry the male part out and pushed the new part in. The female part of the door catch was more difficult. I didn't do it in "textbook" form, but got the job done with pliers and a screwdriver. Worth ever
... Read more
y penny to fix correctly instead of rigging it. Do it!
Read less
Was this helpful?
Thank you for voting!
door latch broke
1 person
found this instruction helpful.
-
Debra from Oakland, NJ
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Pop out the old latch and replaced with a new one
Was this helpful?
Thank you for voting!
catch was missing to close dryer door
2 of 4 people
found this instruction helpful.
-
DONNA from SAN LORENZO, CA
- Really Easy
- Less than 15 mins
The only thing I had to do was hammer the catch inside the square fitting and presto it was done. It took me less than 3 mins. I thought I might of needed instructions, but it was really simple. Even a guy can do it. (smile)
Was this helpful?
Thank you for voting!
door catch broke therefore dryer door would not close
1 person
found this instruction helpful.
-
vernette from sprague, WA
- Really Easy
- Less than 15 mins
just put the new part in the door---sooo easy! THANK YOU!
Was this helpful?
Thank you for voting!
Piece of cake
1 person
found this instruction helpful.
-
David from DELRAY BEACH, FL
- Very Easy
- 30 - 60 mins
-
Screw drivers
The video shows you all you need to know
Was this helpful?
Thank you for voting!
My daughter threw a heavy wet comforter into the dryer and the tri-ring sheared off.
1 person
found this instruction helpful.
-
Joe from St. Louis, MO
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers
I ordered the part(and a backup) and had it in two days. 5 days less than ordering from sears.
Was this helpful?
Thank you for voting!
Dryer making excessive noise; then continued to blow circuit
1 person
found this instruction helpful.
-
Ava from BALTIMORE, MD
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers, Socket set
Attributed excessive noise to age of dryer, upon closer inspection, a dish towel had become caught at rear of drum because the drum support rollers were damaged causing the drum to create a space in the rear of the drum. This was large enough for the dish towel to be caught. Originally I thought that the thermal fuse had blown the circuit
... Read more
-which should occur in an overheating situation-however the loose drum had worn through the electrical wire leading to the door switch because it was not properly seated on the rear drum rollers. the wire was repaired with a wire nut, rear drum rollers were installed and it is working again. thank you for the extremely fast shipping
Read less
Was this helpful?
Thank you for voting!
rollers had been new too long!
1 person
found this instruction helpful.
-
Scott from EVEREST, KS
- Very Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers, Socket set
Took of the btm pan and the top to be able to remove the front. Raised the drum enough to replace the right hand wheel. ( the old ones had already been removed) Replace the left hand wheel and bracket. Re assemble the machine. Worst part was trying to do all this with the can of beer in one hand!!
Was this helpful?
Thank you for voting!
Dryer would not heat and the timer would not turn as it should
1 person
found this instruction helpful.
-
Jeff from OAKLAND, TN
- Really Easy
- 30 - 60 mins
-
Socket set
I replaced a bad thermostat
Was this helpful?
Thank you for voting!