11086402 Kenmore Dryer - Instructions

All Instructions for the 11086402
106 - 120 of 307

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Very loud squeaking!
2 of 2 people found this instruction helpful.
  • Travis from GARRETT, IN
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
Couple screws behind the electrical panel at the top and the top pushed back and was able to remove front panel, and then it was pretty easy. Take the two screws on top front, lint trap screws . The lint trap vent needs to come off. Then the belt, drum comes out to access the idler pulley. I did replace two drum wheels, I saw there was 5. I would recommend replacing all of them, they didn’t move well…..
Was this helpful?
Thank you for voting!
The bearing on the idler pulley went bad, squealing
2 of 2 people found this instruction helpful.
  • Gerald from Yucaipa, CA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Took the dryer apart and replaced the idler pulley with bracket and the drive belt
Was this helpful?
Thank you for voting!
Lights turn on, all the beeps but dryer won't start.
2 of 2 people found this instruction helpful.
  • James from HONESDALE, PA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers
I ordered the wrong part. It was pick and choose from the info provided.I checked again and found one that's 58% of the time the part.
Was this helpful?
Thank you for voting!
Dryer stopped working.
3 of 5 people found this instruction helpful.
  • Andrew from Edina, MN
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
I followed the on-line video. I am extremely happy I made the effort and successfully fixed my dryer on my own. It sure beats a new dryer expense or high repair cost.
Was this helpful?
Thank you for voting!
Dryer door latch broke and door wouldn’t stay shut.
2 of 2 people found this instruction helpful.
  • Susan from WARREN, NJ
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Jimmied out the latch using two screw drivers to get under the edges. Pushed the new piece in. Voila! Took 2 minutes for what my repair man told me would cost about $200 to fix. Unbelievable!!( I first watched some YouTube videos to get the idea )
Was this helpful?
Thank you for voting!
No leveling feet on dryer.
2 of 2 people found this instruction helpful.
  • Bobbie from BEND, OR
  • Very Easy
  • Less than 15 mins
  • Wrench (Adjustable)
This could not have been easier. The hardest part was tipping the dryer over on its' side.
Instructions:
1. Tip dryer over onto a non-scratch surface. I used a tarp on the floor.
Insert leveling foot into the foot opening on the bottom of the dryer &
screw in with fingers until it is difficult to turn.
2. Use t he adjustable wrench on the hexed foot (not the threads) to adjust to the desired level.
3. Tip dryer upright taking care not to exert pressure on the feet closest to floor. I used a folded-up tarp under the bottom edge of the dryer while lifting it to the upright position.
4. Use a level, back to front & side to side, to determine if feet need further adjustment.
5. Adjustments can be made with the dryer in the upright position, using the adjustable wrench on the hexed foot.
Was this helpful?
Thank you for voting!
Broken belt
2 of 2 people found this instruction helpful.
  • Robert from CALIFORNIA, MO
  • Very Easy
  • Less than 15 mins
  • Nutdriver
Disconnect gas line and vent hose,removed top and back covers to install belt.
Was this helpful?
Thank you for voting!
Bad Motor, Would not start.
3 of 5 people found this instruction helpful.
  • Steve from S LAKE TAHOE, CA
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
First unplug appliance, Remove dryer top and front. remove drum and belt. Two clamps hold motor in place. remove them and lint chute housing in rear, exposing the fan. Use vice grips to hold motor shaft behind belt pulley flat spot. Remove fan, it's reverse threads. A large adjustable wrench on plastic fan nut and spray lubricant if very tight. Place new motor next to old and switch wires over, crimp on new 1/8'' connectors. Remember the green ground wire may need an allen wrench. Put back drum,belt, lube the rollers and replace back cover, front, top.
Was this helpful?
Thank you for voting!
The original motor stopped working
2 of 2 people found this instruction helpful.
  • Robert from PFLUGERVILLE, TX
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Had to replace the rear felt seal and the motor. It was no problem to find videos on how to do both of these repairs. Took apart the appliance. When the parts came first replaced the drum rear felt seal and waited for the motor to be delivered. Then replaced the motor as per online instructions. Also went to Home Depot to buy a new flexib le dryer tube since the old one had a few holes. It works perfectly again.
Was this helpful?
Thank you for voting!
Dryer electrically dead
3 of 6 people found this instruction helpful.
  • Dale from Anderson, IN
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Unplugged power cord. Removed rear panel screws and panel . Removed the two wires connected to part. Removed two screws holding part and replaced all components in reverse order.
Was this helpful?
Thank you for voting!
dryer was making a grinding noise
2 of 3 people found this instruction helpful.
  • Scott from MUNCIE, IN
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
I researched causes of the noise, zeroed it down to the idler pulley. I then got the dryer schematic and took the dryer apart after disconnecting the power and the vent. i did not have to remove the drum, the idler pulley was easily accessible once the top and back panels were removed. I simply removed the drive belt from tension off the pulley, removed the old pulley and installed the new one. Once finished the dryer was running whisper quiet.
Was this helpful?
Thank you for voting!
Loud Dryer
3 of 6 people found this instruction helpful.
  • Rod from YORBA LINDA, CA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set
Please do not buy parts from Parts Select. My order was not shipped the next day (as advertised on the web site), but instead 3 days later. I paid an extra couple of dollars for expedited shipping, which did made no difference (except for a couple of extra dollars for Parts Select to pocket).

When I emailed customer service to complain, I never received any response. I can't believe that customer service can be so unimportant in such a competitive marketplace. And with the power of social media, you would think customer service would be a big differentiator.

I ended having to buy another part (the igniter). I found a different vendor with better prices and a commitment to satisfying customers. I got my part in 3 days for cheaper shipping than the starting point of Parts Select shipping. So I guess I should thank Parts Select for forcing me to look elsewhere because I found a better place with better prices and better shipping and better customer service!
Was this helpful?
Thank you for voting!
replace idler pully
1 person found this instruction helpful.
  • curtis from STOCKBRIDGE, GA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
first of all there is no video for this model dryer (cabrio accu-dry) the main difference is that the console is removed by removing 3 screws across the back top of console then using putty knife release spring fastener on each side ,slide forward and lift. remove one screw at top of control board and remove from plastic mount,and unplug connecting wires.remove top of cabinet lifting up and forward. The rest of install is typical to other models. The back panel doesn't come off this model. You have to access everything from the front.
Was this helpful?
Thank you for voting!
Dryer would power up but not run.
1 person found this instruction helpful.
  • Jeremy from VILLA RICA, GA
  • Easy
  • 30 - 60 mins
  • Nutdriver
Removed front of dryer. Located thermal fuse, replaced blown thermal fuse. Reassembled.
Was this helpful?
Thank you for voting!
The belt broke
1 person found this instruction helpful.
  • Micah L from PORT ORANGE, FL
  • Very Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
It was a lot easier then I thought. Just watch the tutorial of how to fix it on this website and you wont have a problem.
Was this helpful?
Thank you for voting!
All Instructions for the 11086402
106 - 120 of 307