110841 Kenmore Dryer - Instructions

All Instructions for the 110841
91 - 105 of 276

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dryer was making a loud sound
2 of 2 people found this instruction helpful.
  • Frans from N ARLINGTON, NJ
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set, Wrench (Adjustable), Wrench set
I follow the instructions from the video you guys show the only issue is putting back the tensioner in place but my brother leaves next door and help me.
Was this helpful?
Thank you for voting!
Door switch
2 of 2 people found this instruction helpful.
  • Charles from JACKSONVILLE, FL
  • Very Easy
  • 15 - 30 mins
First and foremost turn power off to dryer at main box. Next remove screws say lint filter, then gently pry right and left front corners up with putty knife. Raise top and secure. Disconnect switch wire by using flathead sliding in between connection. Next remove 2 screws under front opening to dislodge switch. Repeat process in reverse order...takes 30 min. tops...
Was this helpful?
Thank you for voting!
Loud banging coming from drum area.
2 of 2 people found this instruction helpful.
  • Larry from S ROCKWOOD, MI
  • Really Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers
I watched a U Tube video about banging sound from dryer. Once I recognized the problem, lifted the top, removed 2 screws holding the front, removed the drum, and bingo. Saw the worn out drum roller. Ordered the replacement parts from "PartSelect" on line (Great Company). Was in no hurry, so I chose regular mail delivery. 4 days later, got the correct replacement parts, put the dryer back together, and now, the dryer is quieter then when I bought it new, a thousand years ago. I will never again be afraid to tackle an appliance issue. THANK YOU !!!
Was this helpful?
Thank you for voting!
Dryer tumbler made a loud noise
2 of 3 people found this instruction helpful.
  • jeff from albuquerque, NM
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers
Disassembled dryer, removed tumbler, replaced drum support rollers
Was this helpful?
Thank you for voting!
Worn bushing on bottom drum roller
3 of 6 people found this instruction helpful.
  • Frank from Avon, CT
  • Easy
  • 30 - 60 mins
  • Nutdriver, Socket set
unplugged power, slide unit away from wall, removed bottom front cover, rear sheetmetal cover, tilted front of unit to remove roller outboard support (sheetmetal screw from bottom of dryer). Removed shaft bolt from rear of dryer which released roller assembly. Remove speed nut from old roller assembly to remove outboard support arm, mount ed new roller to new shaft placed triangle clips (one each side of roller), mounted outboard support to front of new shaft and completed re-assembly (reverse order of disaasembly).
Was this helpful?
Thank you for voting!
drum support roller was squeaking VERY loud
2 of 3 people found this instruction helpful.
  • joe from southgate, MI
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
lifted top section of dryer
removed front dryer panel
removed drum belt and tensioner
removed both drum rollers
cleaned both roller axles
installed new rollers
reassembled remainder of dryer
if you are at all mechanically inclined, it is a simple job
Was this helpful?
Thank you for voting!
The dryer nob wasn't working the dryer knob broke off inside the unit
2 of 3 people found this instruction helpful.
  • WILLIAM from SEBASTIAN, FL
  • Very Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
It was very easy to install the new parts successfully thanku parts select I will always keep using your business the representative was so helpful and understanding my problem I wish I could remember his name he was outstanding and a 100 thumbs up to him
Was this helpful?
Thank you for voting!
Loud noise while in use
2 of 3 people found this instruction helpful.
  • Josh from Madill, OK
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Replaced roller. Very simple. Dryer is the easiest appliance to repair. Only a few parts keep a dryer working
Was this helpful?
Thank you for voting!
Dryer door would not stay closed
1 person found this instruction helpful.
  • Gregg from St. Augustine, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
After removing front door panel (2 screws) I removed the old latch catch and replace with the new part. 4 minutes later, the door was back together, the dryer was running and the door was staying closed.
Was this helpful?
Thank you for voting!
Was too old
3 of 7 people found this instruction helpful.
  • HELOISA from BOCA RATON, FL
  • Really Easy
  • Less than 15 mins
I just changed for the new one! 2 seconds.
Was this helpful?
Thank you for voting!
Seal snapped, which lead to longer dry cycles.
2 of 4 people found this instruction helpful.
  • Christian from Sunapee, NH
  • Really Easy
  • Less than 15 mins
Just slipped it on, it was very simple. My dry cylces were reduced. Worth the $15 I spent to get the part!!!!
Was this helpful?
Thank you for voting!
dryer door wouldn't catch, catch was broken
1 person found this instruction helpful.
  • Theodore from Tyler, TX
  • Really Easy
  • Less than 15 mins
took the cstch reciever out, with my fingers, pushed the new one in, snap lock fit.......couldn't be better, like repairing a model T ford.......
Was this helpful?
Thank you for voting!
broken door catch
2 of 4 people found this instruction helpful.
  • Michael from Goddard, KS
  • Really Easy
  • Less than 15 mins
the part fit perfectly, it just snaped right into place.
Was this helpful?
Thank you for voting!
broken door catch
1 person found this instruction helpful.
  • Frank from ENDICOTT, NY
  • Very Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Took 3 screws out used the putty knife to pry the door a part then used the pliers to remove the old door catch and then sapped the new one and put the door back together and I was was done in less than 10 min.
Was this helpful?
Thank you for voting!
latch was broke
1 person found this instruction helpful.
  • Rick from SAN DIEGO, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
just followed the video directions, worked perfectly thanks
Was this helpful?
Thank you for voting!
All Instructions for the 110841
91 - 105 of 276