110841 Kenmore Dryer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dryer would not heat and the timer would not turn as it should
1 person
found this instruction helpful.
-
Jeff from OAKLAND, TN
- Really Easy
- 30 - 60 mins
-
Socket set
I replaced a bad thermostat
Was this helpful?
Thank you for voting!
delivery of part over 10 days, fedex rescheduled delivery 3 days in a row.
1 person
found this instruction helpful.
-
David from MONTPELIER, IN
- Really Easy
- 30 - 60 mins
-
Screw drivers
I closed breaker to dryer. I removed the two screws attaching the lent catcher to the top. I used the putty knife to release the latch on the top of dryer while moving the top forward I was able to lift the top. Now I am waiting on the new door switch before proceeding with replacement. The completion should take another ten minutes.
Was this helpful?
Thank you for voting!
dryer would not power off when i opened the dryer door.
1 person
found this instruction helpful.
-
john from JACKSONVILLE, FL
- Really Easy
- 30 - 60 mins
-
Nutdriver
removed two screws from filter acess and raised top of dryer to acess switch, easy remove and replace, thanks.
Was this helpful?
Thank you for voting!
My daughter threw a heavy wet comforter into the dryer and the tri-ring sheared off.
1 person
found this instruction helpful.
-
Joe from St. Louis, MO
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers
I ordered the part(and a backup) and had it in two days. 5 days less than ordering from sears.
Was this helpful?
Thank you for voting!
Dryer was making a loud rattling noise and shaking
1 person
found this instruction helpful.
-
Lindsey from Lancaster, PA
- Really Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
I watched the part select you tube video that links specific loud dryer noises to specific broken or loose parts. It allowed me to identify the part I needed, which I ordered through their website. Two days later, I had the part and installed it, with help from another online video that showed me how to take the dryer apart to install the
... Read more
drum support roller. Thank you, the information provided made the repair quite easy. It works perfectly now!
Read less
Was this helpful?
Thank you for voting!
door would stay closed
1 person
found this instruction helpful.
-
william from KILLEEN, TX
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
just replaced parys
Was this helpful?
Thank you for voting!
dryer wouldn't stop when opening door
1 person
found this instruction helpful.
-
Edward from FRENCHBURG, KY
- Really Easy
- 15 - 30 mins
-
Screw drivers
removed two screws in dryer vent released the catches on the top removed the two screws holding the switch releases the wire holder unplugged the wire and reversed the same putting back a peace of cake and part select very fast shipment
Was this helpful?
Thank you for voting!
Kept running with door open.
1 person
found this instruction helpful.
-
Mark from NORTH READING, MA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Replaced switch very easy to do.
Was this helpful?
Thank you for voting!
Dryer door wouldn't catch and stay shut
1 person
found this instruction helpful.
-
Melody from TEXARKANA, TX
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
I take the screws out of the door, I removed the catch from behind inside the dryer door, I slid the new catch in the door and snapped it in place. After getting a new catch in the door I put the door back together and put the screws in. Easy repair
Was this helpful?
Thank you for voting!
broken belt
1 person
found this instruction helpful.
-
William from Newport, VT
- Easy
- 15 - 30 mins
-
Nutdriver, Socket set
removed two screws from lint screen raised top removed two nut screw from front disconnected lid wire lifted front up and off removed drum cleaned all dust out replaced pulley unit with new one (with a wheel) replaced tub held it up with a bungey cord put on new belt and reassembled unit tested out back in busine
... Read more
ss
Read less
Was this helpful?
Thank you for voting!
Noise in dryer when dryer was turned on
2 of 4 people
found this instruction helpful.
-
Michael from Marion, KY
- Easy
- 30 - 60 mins
-
Screw drivers, Socket set, Wrench (Adjustable)
Removed the drum then removed the old parts and installed the new ones. Dryer now runs very quite and heats good. You have very fast service my mother ordered the parts on the net one day and I received the parts next day and did the repair that night and dried clothes. Thanks,
Your great service is very hard to find.
Your great service is very hard to find.
Other Parts Used:
Was this helpful?
Thank you for voting!
Dryer was making all kinds of noises
1 person
found this instruction helpful.
-
Noel from N BRANFORD, CT
- Easy
- 30 - 60 mins
-
Nutdriver, Socket set
After checking out the website and the videos posted to YouTube, I decided that I should take a chance and try and repair the problem myself. I am not in any way mechanical, and for me personally, this was a huge job. The instructions and the video were so clear that it made the job easy. Taking out the dryer drum was a concern, and altho
... Read more
ugh not heavy, I used a friend to hold it in place when I was putting it back together. My only small issue was when I was removing the rollers. I had some difficulty taking off the plastic locking washers but other than that, it was a breeze. The videos posted are great and very easy to follow. While doing the above job, I also replaced the dryer belt and heating element, both of which I followed instructions as per video. The dryer is running very smooth, and is the quietest it has been for many years. Very happy with all aspects of service advice and videos.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Dryer was making a lot of noise while running.
3 of 7 people
found this instruction helpful.
-
Ramon from Los Angeles, CA
- Easy
- 1- 2 hours
-
Nutdriver, Screw drivers
After identfying that the problem was due to a damaged drum support roller, I decided to replace the bad roller instead of replacing the dyer itself.
The first thing was to remove the front cover
and the front panels to expose the drum. (Only a few screws hold them in place.) Next, the drum was removed by first releasing t ... Read more he belt from the motor pulley and tensioner, and then pulling the drum straight out.
At this point the two rollers would be exposed. The triangular plastic retaining locks were removed by slightly prying them off. The old rollers were then removed and replaced.
Before putting everything back, this was a good time to vacuum all the accumulated lint inside, especially the lint that had accumulated around the motor assembly and the fire box.
(A pleasant surprise: I found a lot of coins inside the unit, enough to recoup half of what I spent for the new rollers.)
The first thing was to remove the front cover
and the front panels to expose the drum. (Only a few screws hold them in place.) Next, the drum was removed by first releasing t ... Read more he belt from the motor pulley and tensioner, and then pulling the drum straight out.
At this point the two rollers would be exposed. The triangular plastic retaining locks were removed by slightly prying them off. The old rollers were then removed and replaced.
Before putting everything back, this was a good time to vacuum all the accumulated lint inside, especially the lint that had accumulated around the motor assembly and the fire box.
(A pleasant surprise: I found a lot of coins inside the unit, enough to recoup half of what I spent for the new rollers.)
Read less
Was this helpful?
Thank you for voting!
Door keeps opening while operating
1 of 2 people
found this instruction helpful.
-
Carmine from MASSAPEQUA PK, NY
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Removed old catch and strike with screwdriver and needle nose pliers. Installed new parts. My old catch did not have comparible numbers so I just used the yellow one. Worked fine.
Was this helpful?
Thank you for voting!
Noisy
1 of 2 people
found this instruction helpful.
-
Kevin from PT PLEAS BCH, NJ
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set
Lifted top of dryer using putty knife. Took front panel off using socket wrench. Slipped drum belt off an took drum out. Vacuumed out entire interior. Replaced rollers an clips and reassembled!! Saved $100!!! Thank you!!
Was this helpful?
Thank you for voting!