110841 Kenmore Dryer - Instructions

All Instructions for the 110841
61 - 75 of 276

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lint Filter and Cover Missing
3 of 3 people found this instruction helpful.
  • Maxine from FORT WORTH, TX
  • Really Easy
  • Less than 15 mins
Didn't need a repairman for this project! Ordered the part (seems like on Sunday) and got it really quick (the next Wednesday). Opened the package, placed the part where it was supposed to go and shazam!!!! Fixed it was quick and easy!
Was this helpful?
Thank you for voting!
Dryer wouldn't shut off
4 of 6 people found this instruction helpful.
  • Jason from HUDSON, OH
  • Very Easy
  • Less than 15 mins
  • Nutdriver
The dryer would dry the clothes fine and run through heat cycles and cool down. The timer would also run down, it just would stop even thought the heat stopped. To repair, I took the back off the timer portion of the dryer. At first I panicked. I did not see any part that looked like the new one I just ordered. I searched the interne t and found that the original part looked like a black plastic loop with a black and orange wire connected to it. The part I got was the new design. Then I couldn't figure out if it mattered which end I hooked to the black wire. Another internet search showed it doesn't matter which way current flows through a resistor, so it didn't matter. Hooking in the new part was very easy. The time it took to get the information to identify the part, and determine if it matter which end to hook up to which wire took the longest. I would recommend PartSelect put a picture of the old style right beside the picture of the new style. Also would like them to make clear it doesn't matter which direction the Timer Power Resistor went in.
Was this helpful?
Thank you for voting!
broken air filter
3 of 3 people found this instruction helpful.
  • Martin from CATHEDRAL CTY, CA
  • Very Easy
  • Less than 15 mins
I would not ever consider this a repair. The dryer filter cracked because of my wife put it in loosely. The new one just fit right in.
What was so good about the entire process was how quickly I recieved the part. A matter of two days.
Was this helpful?
Thank you for voting!
Broken dryer lint trap
3 of 3 people found this instruction helpful.
  • Amy from ANNANDALE, MN
  • Very Easy
  • Less than 15 mins
Excellent and super easy. Owned the box and snapped the new one in. Ready for laundry again in a matter of minutes.
Was this helpful?
Thank you for voting!
The friggin thing wouldn't shut off when you opened the door. The switch dealie was just hangin there like a loose tooth.
3 of 3 people found this instruction helpful.
  • Steve from DES PERES, MO
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
The videos showed the tech taking the front off the unit but my unit didn't play that game. Instead all I had to do was take the top loose, (don't forget to take the dryer vent screws out first, that was the first beer) then access to the switch was easypeezy. That coupling for the switch assembly was 2 beers long. Anyways, got it all bac k together and it works like it's suppose to.
Was this helpful?
Thank you for voting!
The dryer stop working
3 of 3 people found this instruction helpful.
  • Francisco from COLORADO SPGS, CO
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Very easy fix. I save my self about $300. Try the fuse first is about $26
Was this helpful?
Thank you for voting!
Rear drum rollers were shot.
3 of 3 people found this instruction helpful.
  • David from JOLIET, IL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Socket set
I followed the instructions on the video and it was simple. The hardest part was vacuuming out 32 years of lint from around the motor and igniter. I was lucky there was never a fire in the dryer.
Was this helpful?
Thank you for voting!
Lint filter on dryer had broken apart
3 of 3 people found this instruction helpful.
  • Julie from TUSCARORA, NV
  • Really Easy
  • 15 - 30 mins
Replacement fit perfectly.
Was this helpful?
Thank you for voting!
The dryer just stopped working. Couldn’t get it to start.
3 of 3 people found this instruction helpful.
  • Anita from WILKES BARRE, PA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Watched a you tube video that told me exactly how to do it. Saved us from going out and buying a new one. My husband and I were very proud of ourselves because just to get someone to look at it would have cost us $85. The part was only around $25.
Was this helpful?
Thank you for voting!
The drum made a lot of noise while turning. The dryer shook
3 of 3 people found this instruction helpful.
  • Craig from VASS, NC
  • Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers, Socket set
Used the video to remove the top and front. Removed the drum. Removed the spindle through the whole next to the spindle. Vacuumed a ton of lint in the dryer and vent pipe. Reassembled in reverse order. Easy repair and a good time to clean the lint.
Was this helpful?
Thank you for voting!
start switch replace
3 of 3 people found this instruction helpful.
  • john from GERBER, CA
  • Very Difficult
  • More than 2 hours
  • Screw drivers
i could not perform the repair because despite using the proper id numbers, i received the wrong parts from kenmore three times in a row. now i am trying to return the wrong parts which cost me 120.00 for the start switch, and the knob for the switch, so far. the switch was 40.00 the simple plastic button was (wrong) 40.00, and the wrong unidentifiable part, suposedly correct one, which also was 40.00. this, with the original 40.00 wrong switch amounted to the 120.00 that i am still trying to have returned. otherwise, the fix should be quick and simple, o yeah, its been three months.. you tell me if i am satisfied....
Was this helpful?
Thank you for voting!
a broken belt
6 of 12 people found this instruction helpful.
  • Dorise from Donalsonville, GA
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Socket set, Wrench (Adjustable)
my hany man did it....
Was this helpful?
Thank you for voting!
Dryer drum wouldn't turn and motor would shut off
3 of 4 people found this instruction helpful.
  • Cynthia M from Westfield, MA
  • Easy
  • More than 2 hours
  • Screw drivers
First I was told by the maytag repair man that the motor was shot and it would be 467 dollars to repair. Since I didn't have that kind of money I decided to take it apart to see if I could replace the motor myself. Once I had it apart I saw the part that held the motor in place was broken off and the motor was out of place causing it too shut itself off. Once I figured it all out it took about 2 minutes to replace the less than 6 dollar part! Thanks partSelect!!!
Was this helpful?
Thank you for voting!
the lower drum support roller had been chewed to bits.
3 of 4 people found this instruction helpful.
  • Rodney from Mt. Jackson, VA
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
I pried open the top of the dryer, removed the 2 scrws holding the front cover of the dryer, un hooked the dryer drum buide belt, removed the dryer drum - all this just to get to the drum support roller. The bottom roller - the rubber on the wheel had been "chewed of". I can only guess because too much weight was placed in the dryer with wet clothes.
I removed the triangle shaped retaining clip, using the mini flat head screw-driver, slid the damaged roller off, replaced the new roller, and installed the new retaining clip. To install the new clip, I used a 1/2inch nut driver. I did the same to replace the upper drum support roller. The actual repair took less than 5 minutes, However, the prep time in dismanteling the dryer in order to get to the drumm rollers and puting the dryer back to gether consumed the bulk of my time.
Was this helpful?
Thank you for voting!
Lint trap was warped and would not stay in the opening.
3 of 4 people found this instruction helpful.
  • Carmella from THONOTOSASSA, FL
  • Very Easy
  • 15 - 30 mins
Easy for a 87 year old.I just snapped the cover to the filter basket and then inserted the whole basket into the
Was this helpful?
Thank you for voting!
All Instructions for the 110841
61 - 75 of 276