110815 Kenmore - Instructions

All Instructions for the 110815
31 - 45 of 54

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Needed a new filter screen for Kenmore Dryer
1 person found this instruction helpful.
  • SYDNEY from BOSTON, MA
  • Very Easy
  • Less than 15 mins
Pulled out the very old worn out and damaged filter screen and replaced it with a new filter screen.
Was this helpful?
Thank you for voting!
Needed to replace lint filter on my 25 yr old me more dryer
1 person found this instruction helpful.
  • Roberta from VIRGINIA BCH, VA
  • Very Easy
  • Less than 15 mins
Easily installed lint filter for my 25 yr old dryer Thanks
Was this helpful?
Thank you for voting!
timer knob cracked
1 person found this instruction helpful.
  • LINDA from MOUNT LAUREL, NJ
  • Very Easy
  • Less than 15 mins
just slipped new part on and was back in business
Was this helpful?
Thank you for voting!
Lint screen was broken - replaced it with a new one.
1 person found this instruction helpful.
  • Maura from Burbank, IL
  • Very Easy
  • Less than 15 mins
There were no repairs - I just ordered a lint screen because the screen on the last one pulled away from the frame and wasn't doing a good job of catching the lint. Took approximately 2 seconds to push the new one in the slot.

Fast efficient delivery from Parts Select.com.

No need to publish this I'm sure.
Was this helpful?
Thank you for voting!
Broken timer knob
1 person found this instruction helpful.
  • Thomas from DOVER, PA
  • Really Easy
  • Less than 15 mins
Took longer to get out of box then the install. Just push knob on and your done.
Was this helpful?
Thank you for voting!
broken handle on lint filter
2 of 4 people found this instruction helpful.
  • Ronald from Anaheim, CA
  • Really Easy
  • Less than 15 mins
received part 4 days after order. very pleased about that! Local Sears Service center was out of stock.

carefully removed old "handleless" lint filter.
inserted new lint filter and Voila! success.
Was this helpful?
Thank you for voting!
Lint collector was cracked and I was unable to insert easily.
1 person found this instruction helpful.
  • Marilyn from HORNICK, IA
  • Really Easy
  • Less than 15 mins
Simply removed old dryer lint collector and installed the new one.
Was this helpful?
Thank you for voting!
replaced the dryer lint screen filter
1 person found this instruction helpful.
  • Beatrice from WALTHAM, MA
  • Really Easy
  • Less than 15 mins
removed the old damaged filter and replaced with the new one
Was this helpful?
Thank you for voting!
lint filter handle broke off
1 of 2 people found this instruction helpful.
  • Richard from Monroe, NY
  • Really Easy
  • Less than 15 mins
the replacement part fit perfectly, as I thought it would given another repair story. The repair took less than a minute to take the old one out and put the new one in.
Was this helpful?
Thank you for voting!
dryer would not start
0 of 1 people found this instruction helpful.
  • David from Royal oak, MI
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
loosened the control pannel-took the back off,held the new timer next to the existing one and switched the 8 to 10 wires one at a time from the old to the new unit,installed it ,put the knob back on and I was good to go.
Was this helpful?
Thank you for voting!
Dryer not drying clothes
0 of 2 people found this instruction helpful.
  • Brian from Lewisville, TX
  • Really Easy
  • Less than 15 mins
By simply replacing the lint filter our dryer now dries clothes in less than an hour like it did when it was new.

Prior to replacing the filter it would take 2 hours to dry a load of clothes.
Was this helpful?
Thank you for voting!
broken handle
0 of 2 people found this instruction helpful.
  • Carrie Eplen from Kingsland, TX
  • Really Easy
  • Less than 15 mins
removed old unit and replaced with new. perfect fit.
Was this helpful?
Thank you for voting!
The old lint screen was torn and in need of replacement
  • Bruce from Wyncote, PA
  • Really Easy
  • Less than 15 mins
The replacement that was ordered was a perfect fit for the worn part and merely required placement into the lint screen area. The entire procedure, from ordering the part, to installation was amazingly easy. I would not hesitate to order future parts from PartSelect.
Was this helpful?
Thank you for voting!
old lint filter was broken
  • John from York, PA
  • Really Easy
  • Less than 15 mins
All I had to do was take out the broken filter and replace it with the new one. It fit perfectly. The replacement took less than 5 minutes. I should have done it a year ago!!
Was this helpful?
Thank you for voting!
Lint screen broken
  • Peggy from Kingsbury, TX
  • Really Easy
  • Less than 15 mins
Open box, insert lint screen!
Was this helpful?
Thank you for voting!
All Instructions for the 110815
31 - 45 of 54