110815 Kenmore - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Needed a new lint filter
3 of 3 people
found this instruction helpful.
-
Evelyn from JACKSONVILLE, FL
- Very Easy
- Less than 15 mins
Took the old one out, replaced it with new one.
Was this helpful?
Thank you for voting!
Lint Filter wore out.
4 of 6 people
found this instruction helpful.
-
Claude from Austin, TX
- Really Easy
- Less than 15 mins
It required no tools, just take out the old torn filter and slip in the new one. I should have ordered it a year ago, with the ease of the website and the delivery via Fed Ex. super easy.
Was this helpful?
Thank you for voting!
Timer knob broke due to fatigue after years of use.
3 of 4 people
found this instruction helpful.
-
Lary from Aurora, CO
- Really Easy
- Less than 15 mins
The original part is no longer manufactured. However, PartSelect provided a cross reference from the original part number to an acceptable replacement. The new part simply had to be lined up and pushed on to the shaft. The time required to install the replacement was approximately one minute.
Was this helpful?
Thank you for voting!
Lint filter cracked
2 of 2 people
found this instruction helpful.
-
Cynthia from POLAND, ME
- Very Easy
- Less than 15 mins
Removed old filter, replaced with new.
Was this helpful?
Thank you for voting!
Dryer knob plastic shaft cracked
2 of 2 people
found this instruction helpful.
-
Sarah from PINECREST, FL
- Really Easy
- Less than 15 mins
The new knob went right on my 33 year old Kenmore dryer. It looks just like the old knob except that it is shiny and new.
Was this helpful?
Thank you for voting!
The old knob cracked on the innerpart.
2 of 2 people
found this instruction helpful.
-
Sandra from COLUMBUS, MT
- Very Easy
- Less than 15 mins
I just lined up the knob with the post and pushed it on, easy!
Was this helpful?
Thank you for voting!
Lint would no go throw
2 of 2 people
found this instruction helpful.
-
Jean M from CHESAPEAKE, VA
- Really Easy
- Less than 15 mins
Received the new lint removal from the box and install it easily
Was this helpful?
Thank you for voting!
The dryer nob wasn't working the dryer knob broke off inside the unit
2 of 3 people
found this instruction helpful.
-
WILLIAM from SEBASTIAN, FL
- Very Easy
- 30 - 60 mins
-
Pliers, Screw drivers
It was very easy to install the new parts successfully thanku parts select I will always keep using your business the representative was so helpful and understanding my problem I wish I could remember his name he was outstanding and a 100 thumbs up to him
Was this helpful?
Thank you for voting!
the handle had broken on the lint filter so i had fashioned paper clips into the holes to get the filter out
2 of 3 people
found this instruction helpful.
-
Stacey from Corinth, TX
- Really Easy
- Less than 15 mins
after i got the replacement filter, it fit perfectly. the filter is white & my dryer is beige but i don't care...i'm just happy i have a good lint filter again, for my at least 30 year old dryer....thanks part select!
Was this helpful?
Thank you for voting!
The timer became intermittent and needed replacement.
1 person
found this instruction helpful.
-
Gary from Colleyville, TX
- Easy
- 1- 2 hours
-
Nutdriver, Pliers, Screw drivers
I removed the back cover of the control console (after unplugging the dryer of course), used a vacuum to clean several years of dust and lint, and sized up the job. Since nearly a dozen wires connected to the timer, I made detailed notes and a drawing to insure that each wire was reconnected in its proper location. Some of the wire conn
... Read more
ectors were quite difficult to reach and remove with my fingers, so I carefully used some needle-nose pliers to remove them. The timer was easily removed with a nutdriver. Replacement was a snap, especially since I had a great diagram for reconnecting the wires!
Read less
Was this helpful?
Thank you for voting!
replaced the dryer lint screen filter
1 person
found this instruction helpful.
-
Beatrice from WALTHAM, MA
- Really Easy
- Less than 15 mins
removed the old damaged filter and replaced with the new one
Was this helpful?
Thank you for voting!
Handle broke off of the Lint filter
1 person
found this instruction helpful.
-
William from FAIRPORT, NY
- Easy
- 15 - 30 mins
Removed old filter and replaced with the new one.
Was this helpful?
Thank you for voting!
The handle would not seat" , with the old dryer lint slot. Had to remove the handle and leave the medal holder , to which the handle was popped on, by slot and hooks.
1 person
found this instruction helpful.
-
West from Montgomery, AL
- Difficult
- 15 - 30 mins
I inserted the sharp kniife point, pryed back a flap , thus releasing the nylon locking hook, in the slot. then did the other side...I removed the white plastic handle, leaving the metal frame, which lay more flat in the filter channel. I put a box of screws on top of the dryer flap to keep it snug.. this is a Kenmore about 15 years old.
... Read more
Grahare
Grahare
Read less
Was this helpful?
Thank you for voting!
Needed to replace lint filter on my 25 yr old me more dryer
1 person
found this instruction helpful.
-
Roberta from VIRGINIA BCH, VA
- Very Easy
- Less than 15 mins
Easily installed lint filter for my 25 yr old dryer Thanks
Was this helpful?
Thank you for voting!
Needed a new filter screen for Kenmore Dryer
1 person
found this instruction helpful.
-
SYDNEY from BOSTON, MA
- Very Easy
- Less than 15 mins
Pulled out the very old worn out and damaged filter screen and replaced it with a new filter screen.
Was this helpful?
Thank you for voting!