110815 Kenmore - Overview

Models starting with 110815

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
LINT SCREEN ASSY, WOD – Part Number: W11778253
$68.09
In Stock
LINT SCREEN ASSY, WOD
★★★★★
★★★★★
(44)
Part #W11778253
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. Check your user manual and model number to see if this is the right part for you. Make sure you empty the lint filter after every use of the dryer and check the filter slot for an excess buildup of lint, which can shorten the life of your filter and be a fire hazard. The screen is approximately 20 inches in length, not including the handle, and around 8.5 inches wide.
Washer Hose Clamp – Part Number: WP596669
$11.52
In Stock
Washer Hose Clamp
Part #WP596669
Washer Knob Springclip – Part Number: WP688805
$14.66
In Stock
Washer Knob Springclip
★★★★★
★★★★★
(1)
Part #WP688805
Also known as the inside sleeve for the knob to be able to properly fit over the shaft of the switch. Sold individually.
Washer Screen – Part Number: WP96160
$18.65
In Stock
Washer Screen
Part #WP96160
Found on the water inlet valve.
Water Inlet Hose Washer – Part Number: WP16123
$10.47
Special Order
Water Inlet Hose Washer
Part #WP16123
Sold Individually. Order quantity needed.
Timer Knob – Part Number: WP688865
$45.55
Special Order
Timer Knob
★★★★★
★★★★★
(1)
Part #WP688865
This knob accepts a D-shaped shaft.
Hose Washer  Kit – Part Number: 285452A
$10.47
In Stock
Hose Washer Kit
Part #285452A
Washer fill hose gasket and screen. This is a set of 4.
Silicone Rubber Adhesive - 2 oz – Part Number: WP279368
No Longer Available
Silicone Rubber Adhesive - 2 oz
Part #WP279368
This is a high temperature adhesive that is used for gaskets and felt seals.
Freezer Door Key – Part Number: WP842177
$10.67
In Stock
Freezer Door Key
Part #WP842177
Sold individually.
Cleaning Brush – Part Number: 4210463RW
$36.95
In Stock
Cleaning Brush
★★★★★
★★★★★
(1)
Part #4210463RW
Cleaning brush for coils on refrigerator and freezers, dryer lint filter housings, and more.
Nut-Push-In – Part Number: WP357213
$14.92
In Stock
Nut-Push-In
Part #WP357213
Sold individually.

Common Symptoms of models starting with 110815

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Needed lint filter for my old Kenmore dryer that was no longer manufactured by Sears.
35 of 37 people found this instruction helpful.
  • Richard from Fairfax, VA
  • Really Easy
  • Less than 15 mins
Lint filter supplied by Parts Select was an exact replacement by an aftermarket manufacturer. I put the old one and the new one side by side and they were identical (of course, the handle wasn't broken off on the new one!). I coulnd't be happier. It arrived at my house 2 days after I ordered it. I highly recommend Parts Select.
Was this helpful?
Thank you for voting!
old lint screen -torn at wire mesh
27 of 28 people found this instruction helpful.
  • Chris from Morgan City, LA
  • Really Easy
  • Less than 15 mins
Local stores did not have any in supply. Went to Partselect and located lint screen, ordered, received in 3 days. replaced screen, Wife now happy again...
Was this helpful?
Thank you for voting!
THe problem was the knob had cracked slightly around the edges, and would no longer turn the shaft.
27 of 29 people found this instruction helpful.
  • michael from allen, TX
  • Really Easy
  • Less than 15 mins
It couldn't be easier. I removed the old knob and stuck the new one on the shaft. Perfection in less than 15 seconds!

I am thankful that PartsSelect had this replacement knob. I tried repairing the old one, first with super glue and finally with heat-shrink tubing. Both worked for a while, but eventually the knob epanded enough to not turn the shaft.
Was this helpful?
Thank you for voting!