11074413 Kenmore Washer - Instructions

All Instructions for the 11074413
121 - 135 of 201

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
water inlet valve was cracked on back of washing machine
0 of 1 people found this instruction helpful.
  • Marco from Somerville, MA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
i removed all screws for back of washer and removed top washer controls. then removed the valves and replaced with new one. reinstalled back in reverse order.really easy job. you just have to pay attention how you took it apart and study how it works , thanks!
Was this helpful?
Thank you for voting!
Cold water was leaking into tub constantly and hot water took forever to fill.
0 of 1 people found this instruction helpful.
  • Judith from St. Louis, MO
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
With the help of reading about other individuals and their problem, I was able to replace the water inlet valve in less than 30 minutes. Unscrewed two screws on top to reveal the flat springs. Popped the springs and released the back of the washer. Removed the old part and replaced with new. A lot easier than I thought.
Was this helpful?
Thank you for voting!
Won't stop filling with water
0 of 1 people found this instruction helpful.
  • Walter from Palmerton, PA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Loosing back cover to reach in and remove valve
Was this helpful?
Thank you for voting!
Water would not shut off plus long time filling
0 of 1 people found this instruction helpful.
  • Kenneth from Brockton, MA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers, Socket set
I simply watched the video that PartSelect has online and it was a big help although my washer was a little different it still gave me the general idea on how to remove the casing. Great website! Thanks PartSelect!
Was this helpful?
Thank you for voting!
machine stopped running hot water
0 of 1 people found this instruction helpful.
  • BRIAN from NEW ORLEANS, LA
  • Easy
  • 15 - 30 mins
  • Screw drivers, Wrench (Adjustable)
replaced valve. Everything now working. Ordering the part was simple and I found a how to video on line that was great The whole replacement of the defective part was easy and the machine was back on line in 30 minutes.
Was this helpful?
Thank you for voting!
valve not shutting off
0 of 1 people found this instruction helpful.
  • Greg from Wapato, WA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
I watched the video on changing the valve. Then ordered the part. The video showed exactly how to do the repair and it was so easy.
Was this helpful?
Thank you for voting!
screeching sound along with small amount of water coming out to fill machine
0 of 1 people found this instruction helpful.
  • JAVIER from LOS ANGELES, CA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I notice a screetching sound started and as time went on the water that flowed out to fill water drum was not working properly, unplugged washing machine electrical cord from outlet. disconnected water hoses, removed screws from control panel, pulled out front cover off wachine machine to access water valve, removed by unscrewing 2 screws , placed bracket on new part(placed over valve and pushed bracket up to slide and align srew to tightenbracket), put everything back in reverse order, helpfull video on video web site for visual
Was this helpful?
Thank you for voting!
Cold water barely filled the tub.
0 of 1 people found this instruction helpful.
  • Dan from Burbank, CA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
I replaces the water inlet valve and now I have full pressure for the cold water to fill the tub.
Was this helpful?
Thank you for voting!
water was over flowing
0 of 1 people found this instruction helpful.
  • mark from Sheridan, CO
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
looked on the find a part by s symptom. found the part,moved the washer took off the back.took 2 screws off of the top of the machine/controls.lifted the top.replace the water inlet valve.put it back together.easy repair.
Was this helpful?
Thank you for voting!
Hot water was not flowing
0 of 1 people found this instruction helpful.
  • Greg from Lafayette, CA
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set, Wrench set
Removed backing and hoses and replaced the water inlet valve.
Was this helpful?
Thank you for voting!
No hot water
0 of 1 people found this instruction helpful.
  • Alan from Brooklyn, NY
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
I followed the great step by step video instructions that you provided. The only difficulty was getting the plugs off the Water Inlet Valve. I had to use pliers (gently) to pull the two plugs off. I would highly recommend PartSelect to my friends.
Was this helpful?
Thank you for voting!
Replace water inlet valve
0 of 2 people found this instruction helpful.
  • Robert from Centreville, VA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers, Socket set
After my son received a repair quote of $130, I decided to help him and do the repair myself. I have replaced inlet valves before and ordered the part ($30) from partselect.com. I received the part in less than 2 days via regular FedEx. I used the Partselect installation video (very accurate) to familiarize myself on accessing the defec tive part. The job took less than 30 minutes. Unfortunately, it also took me another 30 minutes to clean out all the dust bunnies residing under, in, and in back of the washer.
Was this helpful?
Thank you for voting!
hot water threads were bad and leaked
0 of 2 people found this instruction helpful.
  • KURT from NORTH JACKSON, OH
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
followed the video and was as simple as could be.
Was this helpful?
Thank you for voting!
My wash machine was just dipping water into the tub. This was using warm water. It ran for over an hour and barely had any water in it. When I turned it to hot or cold I didn't get any water. For the last few years I wasn't able to use the hot or cold water to wash my clothes because the water
0 of 2 people found this instruction helpful.
  • Khristeen L. from Cedar Rapids, IA
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers, Wrench set
On this particular washer you have to remove the top part of the machine. Where your controls are at, ie: water temp, water level, etc. It takes removing a few screws. Than you have to remove the back of the machine. Unhook the washer hoses going into your machine. This is where your part is on the inside of the back. Remove the back by a few sliding hooks. Unhook the electrial plugins going into the mixer (value inlet). There will be other plugins you have to unplug up around the water level, water temp areas (on top of the machine). Remove the old water inlet value, replace it with the new. Replace all plugin electrical parts and put the back back on. Put top back on, screw in the screws and try your new machine. NOTE: When it comes to these electrical plugins its not that hard. They are are different, they can only go in one way. My wires were all tied together so each plug was at that particular plugin length. Ex: The last plugin was the longest. Pretty easy to know where it go. The other ones were shorter. In other words it was pretty easy to know where they went after unplugging. So don't be scared to try this. There is one wire that is screwed into the metal for a ground wire. Just make sure you do get this back in for your safety. It's the only one that could be over looked. I am a female and I watched and helped my loving father take this machine apart. After this I put this part in myself. I was amazed that my machine was like new again. I agreed to tell my story because by others telling there story is what helped me. It saved me from buying a new machine. When I seen the stories on this particular problem I was ready to take the chance. I had already spent way more than that at the laundry mat. Thank you again and best wishes to you all.
Was this helpful?
Thank you for voting!
Water filling washer tank really slow!!
0 of 2 people found this instruction helpful.
  • jimmy from Philadelphia, PA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
I removed the backing plate from the top, rear side of the machine & opened it up enough to open the side alittle to access the valve...Once I put the new valve in, I put the back panel back on & cleaned up!! Washer works great Again!!
Was this helpful?
Thank you for voting!
All Instructions for the 11074413
121 - 135 of 201