1106607921 Kenmore Dryer - Instructions

All Instructions for the 1106607921
121 - 135 of 326

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
broken door catch
2 of 4 people found this instruction helpful.
  • Michael from Goddard, KS
  • Really Easy
  • Less than 15 mins
the part fit perfectly, it just snaped right into place.
Was this helpful?
Thank you for voting!
The door whould not close enough for the dryer to work.
1 person found this instruction helpful.
  • Frank from Union Beach, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Got my parts very quickly.
Popped out the old door latch with a screw driver and pressed in the new one.
Very simple.
Thanks Parts Select.
Was this helpful?
Thank you for voting!
dryer wouldn't turn on
1 person found this instruction helpful.
  • Kim from Northridge, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed the two screws on the top by the lint catcher. Then, per information from this website, I pried up the top. I reached down into the dryer and removed the two screws on the broken door switch and replaced it with the new part. I am a recently widowed, 55 year old and was thrilled to find good advice, information and instructions on your website!! Simple as could be!
Was this helpful?
Thank you for voting!
catch was missing to close dryer door
2 of 4 people found this instruction helpful.
  • DONNA from SAN LORENZO, CA
  • Really Easy
  • Less than 15 mins
The only thing I had to do was hammer the catch inside the square fitting and presto it was done. It took me less than 3 mins. I thought I might of needed instructions, but it was really simple. Even a guy can do it. (smile)
Was this helpful?
Thank you for voting!
door catch broke therefore dryer door would not close
1 person found this instruction helpful.
  • vernette from sprague, WA
  • Really Easy
  • Less than 15 mins
just put the new part in the door---sooo easy! THANK YOU!
Was this helpful?
Thank you for voting!
door latch broke
1 person found this instruction helpful.
  • Debra from Oakland, NJ
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Pop out the old latch and replaced with a new one
Was this helpful?
Thank you for voting!
filter had holes
1 person found this instruction helpful.
  • Sheila from MOUNT VERNON, IL
  • Very Easy
  • Less than 15 mins
pulled old filter out and then slid the new filter in Done
Was this helpful?
Thank you for voting!
Loud hum but wouldn't work with a load in
2 of 4 people found this instruction helpful.
  • Ronald from Tulsa, OK
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Googled the symptoms the cure was replace the motor. There was a video done by parts select that made the process even easier. Had it done in about 25 minutes.
Was this helpful?
Thank you for voting!
dryer door won't stay shut
2 of 4 people found this instruction helpful.
  • Diana from Canfield, OH
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
I replaced the male end first hoping that a change in the female part would not be needed. Unfortunately no. I used needle nosed pliers to pry the male part out and pushed the new part in. The female part of the door catch was more difficult. I didn't do it in "textbook" form, but got the job done with pliers and a screwdriver. Worth ever y penny to fix correctly instead of rigging it. Do it!
Was this helpful?
Thank you for voting!
Broken door switch
2 of 4 people found this instruction helpful.
  • john from el paso, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Wrench (Adjustable)
I took out the 2 screws that are located on the top of dryer under the lint filter door. Popped up the whole top of dryer. Opened the dryer door to unscrew the 2 door switch screws. Took off the old broken door switch through the open dryer top and before replacing the new door switch completely I tested it by turning the dryer on and pressing the new switch against the button activator 2 find out if it works. When it did, I carefully put the door switch back so the dryer door can activate it properly and screwed in the 2 screws. Finally, I put the dryer top back down & fastened the last 2 screws under the lint filter door.
Was this helpful?
Thank you for voting!
Dryer door kept opening
1 of 2 people found this instruction helpful.
  • Jennifer from Big Timber, MT
  • Easy
  • Less than 15 mins
  • Screw drivers
Popped out the old door catch kit and replaced it with the new one! Easy!!
Was this helpful?
Thank you for voting!
The dryer door catch wouldn't hold the door closed
1 of 2 people found this instruction helpful.
  • Gerald from Thompsonville, MI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I ordered the door catch kit on a Wednesday at it arrived Saturday AM. It took less than 1 minute to pry out the old catch with a flat screwdriver and pop in the new one!
Was this helpful?
Thank you for voting!
Dryer door wouldn't shut
1 of 2 people found this instruction helpful.
  • Amy from Cumberland, RI
  • Really Easy
  • Less than 15 mins
The door catch kit is soo easy. They give you instructions on which one to use depending on your dryer and it fit perfectly into the door. This was great especially since it was so inexpensive! My husband thought we would have to replace the door.
Was this helpful?
Thank you for voting!
The male part of the door catch was broken
1 of 2 people found this instruction helpful.
  • David from Chhicago, IL
  • Really Easy
  • Less than 15 mins
Simply installed the piece and I was done. Took 10 seconds.
Was this helpful?
Thank you for voting!
Dryer would not start, only making a humming noise
2 of 5 people found this instruction helpful.
  • Eddie from El Paso, TX
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
I checked the motor to make sure it turned freely but it didn't so I knew it was bad, your online instructions made it so easy for me to make the motor replacement, if I ever need any appliance parts ever again .....you can bet I'm buying them from you. I purchased the motor for about 40% less then what it was retailed locally.
Was this helpful?
Thank you for voting!
All Instructions for the 1106607921
121 - 135 of 326