1106509 Kenmore Washer Dryer Combo - Instructions

All Instructions for the 1106509
121 - 135 of 167

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dryer door would come open when running
  • Maryanne from Deptford, NJ
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Followed instuctions on video accept our appliance was the Duet HT model so we had a glass window to deal with. Just a few more screws to keep track of but otherwise a very easy repair.
Was this helpful?
Thank you for voting!
The small end of the actuator switch that the door pushes against was broken off.
  • Joyce from Highland Springs, VA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I'm a 66 year old lady with no repair experience at all!! I found the part I needed on Parts Select, which I ordered and received in less than 4 days. I watched the video that you've posted on your website which shows in great detail how to do this repair. It looked like a simple fix and it was!! I highly reccomend Parts Select!! Took my granddaughter(held flashlight) and myself less than 30 minutes to do the repair!!!
Was this helpful?
Thank you for voting!
door catch broke off
  • barbara from san diego, CA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
just the way the video showd me
Was this helpful?
Thank you for voting!
door would not activate dryer......lever broke!
  • nancy from troy, MT
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I am one Happy Gal.....Looked to fix,thought about just buying a new dryer..In the end talked to the local repair guy...said I could do it myself. (why pay him)..I live in small town.Ordered your part,watched the video and did it...Saved myself over $500, plus the $125 for delivery.for that new dryer..(Small town in the forest!)Very easy to install....Hope to use this dryer for many months perhaps years..It is 30 years old! Works like a champ! Thank You!
Was this helpful?
Thank you for voting!
Door Switch Actuator Spring/Lever & Door Catch Replacement
  • Charles from Marysvile, WA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Open the top and replaced the switch bracket with the actuator lever then inserted new door catch.
Was this helpful?
Thank you for voting!
actuator spring lever broke
  • george from port angeles, WA
  • Easy
  • 15 - 30 mins
  • Screw drivers
two screws on filter housing and then lift dryer to up like the hood of a car the two screws on actuator, be careful not to drop actuator, if you do use a magnet to retrieve, two screws back in then wire clip top of dryer down and two screws back into filter housing and your ready to dry clothes, not recommended but if you have to dry clo thes while waiting for part a clamp on the switch will allow you to use dryer, but be extremely careful because dryer will not turn off when door is opened
Was this helpful?
Thank you for voting!
Broken safety switch for door
  • Joseph from West Chester, PA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Lifted front top upward, removed two small/long screws holding switch assy. removed two wires, replaced wires on new switch at the N.O and COM tabs, reinstalled switch assy, lowered top down. DU FINI
Was this helpful?
Thank you for voting!
The dryer door catches needed to be replaced
  • Lisa from Sussex, WI
  • A Bit Difficult
  • 15 - 30 mins
  • Pliers
I watched the video provided first to get an idea of how it should go. The dryer I have had a different kind of door, so those instructions didn't apply. You probably don't want to publish the way I ended up fixing it, but it did work eventually. Saved me over $500!! Thank you!
Was this helpful?
Thank you for voting!
My dryer would not work when I closed the door.
  • Michael from Hudson, NH
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
I thought it might be a damaged switch but when I removed it I noticed a metal clip that was attached to it was broken. The pin on the door pushes against this clip when the door is closed which in turn opens the circuit on the switch. I looked up the model on this website and viewed the parts diagram. There I saw the part I needed and it was listed below along with the cost. Couldn't of been easier. Thanks!
Was this helpful?
Thank you for voting!
over fill water
  • ronnie from meriden, CT
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Wrench set
replace the water valve
Was this helpful?
Thank you for voting!
dryer door switch broke
  • Jeff from Mamaroneck, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I went to internet & got the part & instructions.the shipping cost more than the part. Saved 20.00 & gas.
Was this helpful?
Thank you for voting!
door would not close catch fell within the door
  • Richard from Marmora, NJ
  • Really Easy
  • Less than 15 mins
Pushed the new catch in by hand. Working great.
Was this helpful?
Thank you for voting!
latch inside door popped out
  • zachery from snoqualmie, WA
  • Easy
  • Less than 15 mins
  • Screw drivers
Order one new latch, receive 2 spares. Pushed new latch in, re oriented the catch. was done in less than 5 min
Was this helpful?
Thank you for voting!
Door latch was broken
  • William from Champaign, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
This dryer refuses to die and I am happy to keep it that way. Door latch was replaced in less than a minute using this kit. Easiest repair ever.
Was this helpful?
Thank you for voting!
door would not close
  • Daniel from Stratford, CT
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Slipped screwdriver on top and bottom of catch and pullef out. Pressed new catch in plact. Job finished.
Was this helpful?
Thank you for voting!
All Instructions for the 1106509
121 - 135 of 167