- Home
- 1106117203
- Instructions
1106117203 Kenmore Dryer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Couldnt get the dryer to turn on even when i had power.
0 of 1 people
found this instruction helpful.
-
Kevin from Tonica, IL
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Very easy to repair remove top of dryer and took out to screws and put switch back in place replaced screws and put top back on. Easy!!
Was this helpful?
Thank you for voting!
Wife pulled bed sheets out of drier and broke door switch actuator
0 of 1 people
found this instruction helpful.
-
Ernest from Moundsville, WV
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Loosened two screws in back top of drier and pulled forward and up to hinge top of drier and allow access to door switch.Took out broken actuator spring and replaced with new one,snapped lid back in place and put screws back in hinges and job was done.
Was this helpful?
Thank you for voting!
My dryer door would not stay shut.
0 of 1 people
found this instruction helpful.
-
Michelle from Colby, KS
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed the old door catch by using a screwdriver to pry it out, then I popped the new door catch in its place and it snapped right in. It took less than 5 minutes to do the whole job.
Was this helpful?
Thank you for voting!
the door switch broke, and I had to pop the lid unscrew the switch and use a clothespin to depress the switch acuator button....not pretty.
0 of 1 people
found this instruction helpful.
-
Greg from Phoenixville, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
same as I described above. However i was amazed when the part showed up the very next day...I was expecting maybe 3 or so days later. I wiil absolutely use PartSelect in the future.
Was this helpful?
Thank you for voting!
Dryer door wouldn't stay latched shut during cycle
0 of 1 people
found this instruction helpful.
-
KRISTIN from DENVER, CO
- Really Easy
- Less than 15 mins
-
Pliers
In a matter of moments the dryer that I had grown to despise was back on my good list! I took a pair of pliers and removed the old parts, then inserted the new catch kit. I only about 5 minutes to do AND I love my dryer again!
Was this helpful?
Thank you for voting!
Door latch broken
0 of 1 people
found this instruction helpful.
-
P from Melbourne Beach, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Repair was straight forward with only two screws to undo. Popped the two sides in and I was done. What was amazing was the lowest cost on parts and the timely delivery.
Was this helpful?
Thank you for voting!
Dryer would not come on
0 of 1 people
found this instruction helpful.
-
Steven from Bassett, VA
- Really Easy
- 30 - 60 mins
-
Screw drivers
Replaced the cap over the door switch so when the door closed the switch was engaged
Was this helpful?
Thank you for voting!
Washing machine over 20 years old but still runs strong door switch actuator spring broke original spring was not availible.
0 of 1 people
found this instruction helpful.
-
Larry from Elmhurst, IL
- Easy
- 30 - 60 mins
-
Screw drivers
drilled a 7/16 diameter hole directly in the center of the two mounting holes filed it square big enough so as the spring tip fits thru now the door closes on the spring which actuates the switch looks and works perfect.
Was this helpful?
Thank you for voting!
The dryer would not run.
0 of 2 people
found this instruction helpful.
-
Kevin from North Aurora, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
I first noticed that the tab of the door switch snapped off so the safety on/off switch did not work when the door was closed. I temporarily taped the switch closed so I could use the dryer. I found the model number from the unit and easily found the schematic and part description from the website. I placed the order and had the part in
... Read more
a few days. Problem solved. Thank you
Read less
Was this helpful?
Thank you for voting!
Broken dryer door latch.
0 of 2 people
found this instruction helpful.
-
Fred from Encino, CA
- Really Easy
- Less than 15 mins
Fantastic site and service !!! Using your site, I i'd my needed part in about 10 minutes. I received my Whirlpool dryer door latch part from you in less than 12 hours. Per your internet site instructions, I replaced the part in a few seconds (just popped it into the slot) and my wife had a working dryer for her Sunday wash. I would hav
... Read more
e been out $55 and 4 to 7 days waiting for a service call if I had used my home warranty service contractor. Using your service, the part(s) and shipping were just over $12.
Read less
Was this helpful?
Thank you for voting!
dryer door wouldnt latch shut
0 of 2 people
found this instruction helpful.
-
Phyllis from Riva, MD
- Really Easy
- Less than 15 mins
-
Wrench set
ordered new latch kit and repaired, very easy thank you
Was this helpful?
Thank you for voting!
Dryer would not start
0 of 2 people
found this instruction helpful.
-
Edwin from Shelby, NC
- Easy
- Less than 15 mins
-
Screw drivers
Took top of d then dryer loose then replaced switch actuator put dryer top back in place. Not that hard.
Was this helpful?
Thank you for voting!
Old Part Broke Off
0 of 2 people
found this instruction helpful.
-
Steve from Edina, MN
- Really Easy
- Less than 15 mins
Took 5 seconds, just snapped in the slot, didn't need any tools.
Was this helpful?
Thank you for voting!
door latch/ catch completely shattered
0 of 3 people
found this instruction helpful.
-
Edward from Lowell, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
Snapped latch into existing hole in 2 seconds. The pin that goes into latch was still intact. That's it ,real simple. The only problem I will hopefully not have in the future is the the mico-switch which is just hanging in there, the switch works but the lever that extends out from the face, that works with the door is partially broken of
... Read more
f and the switch is no longer available on your parts list. The appliance is twenty-one years old. I am very happy with your service and I received the parts the next day, after I ordered them and I will be buying more parts in the months to come. This time it will be for my Kenmore gas stove and then a Kenmore refrigerator door hinge.
Read less
Was this helpful?
Thank you for voting!
The spring lever broke at the bend after 26 years of use.
-
Mark from Crestview, FL
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
I followed the basic steps in the video for the dryer door switch replacement. My dryer is much older but everything in the video was basically the same. It was a very easy repair. I have kept this dryer running for 26 of the 27 years of our marriage.
Was this helpful?
Thank you for voting!