110281 Kenmore Washer - Overview

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.

This washer tub seal and bearing kit is designed to restore smooth, watertight operation in top-load washing machines by replacing worn internal components that support the wash basket and drive system. The assembly helps eliminate common problems such as loud grinding or roaring noises during spin cycles, water leaking from beneath the t...Read moreub, and performance issues related to improper spinning or balance errors. By renewing the tub seal, bearings, and related drive components together, the kit helps stabilize the basket, reduce vibration, and extend the overall life of the washer. Installation is considered a complex repair requiring mechanical skill and proper tools, but when completed correctly, it returns the washer to quieter, more reliable operation.

This lid lock helps keep your washer running safely and smoothly. It locks the lid during cycles so the machine won’t spin or wash with the lid open. If your washer won’t start or the lid won’t close properly, this part could be the fix. It’s designed to work with many models and helps your washer know when the lid is open or shut. Easy to install with basic tools—just make sure the washer is unplugged first.

This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.

This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To complete this repair, you will need an Allen wrench, 3/8 inch socket, and a screwdriver. The repair will involved turning off the power and water supply, and tilting the washer on its front to access the sensor.

This washing machine inlet valve is a genuine OEM replacement part designed to regulate water flow during the fill cycle. Controlled by an internal solenoid, the valve opens and closes as needed to allow hot and cold water into the appliance. It features two inlet ports and three push-on connectors for integration with the washer’s intern...Read moreal plumbing. A malfunctioning valve may result in slow or incomplete filling, water leaks, or failure to start the cycle. Installation requires basic tools such as a screwdriver and wrench, and the appliance should be disconnected from power and water sources before beginning. Compatibility should be verified using your washer’s model number.

Sold individually.

The drain hose carries used water from the washer to your house drain.

This hose clamp is sold individually.

This is a replacement lid hinge for your washer. It is approximately 2.5 inches in length and 1.5 inches in width. The lid hinge is what the lid for your washer pivots on. If the lid hinge is damaged, the washer lid may not open or close properly. The lid hinge is screwed into the washer lid. You will need a Phillips-head screwdriver to d...Read moreetach it. There will be a lid hinge on either side of the lid, so be sure to determine if you need to replace both hinges, or only one.