110212 Kenmore Washer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Top section of agitator was slipping.
3 of 4 people
found this instruction helpful.
-
Stephen from Hot Springs, AR
- Really Easy
- 15 - 30 mins
-
Nutdriver
I ordered the new cogs but didn't want to wait the few days for them to arrive. So I decided to try and temporarily repair the old ones. After looking at the picture of the new ones on this site I realized that the teeth were just worn down. I took all four of them out and used a grinding disc to carve the teeth down deeper. They were not
... Read more
perfect. (I would recommend holding the teeth with a vise.) However, after reinstalling the cogs the machine worked perfect and that was two weeks ago. I'm not going to install the new ones until I have to.
Read less
Was this helpful?
Thank you for voting!
On Spin cycle washer jumping all over the place.
2 of 2 people
found this instruction helpful.
-
Tuan from LADSON, SC
- Really Easy
- 15 - 30 mins
-
Socket set
Just follow the video! Very easy.
Was this helpful?
Thank you for voting!
out of balance
2 of 2 people
found this instruction helpful.
-
Charles from ARVADA, CO
- Really Easy
- 15 - 30 mins
-
Nutdriver
The info. was really helpful
Was this helpful?
Thank you for voting!
The top agitator was not spinning
2 of 2 people
found this instruction helpful.
-
Alec from Indianapolis, IN
- Really Easy
- 15 - 30 mins
-
Pliers, Socket set
I popped the dispenser cap off, pulled off the plastic cover that sits on top of the agitator directional cogs assembly, and used a socket wrench with 2 extensions on it to unscrew the nut holding the assembly in place. I misplaced my socket screwdriver and rather than try to buy a nutdriver that matched the size, I just bought a little 3
... Read more
/8" socket extension kit (I needed about 8" of length to be able to use a normal socket wrench). My hands are pretty big so I just had to use pliers to pull the agitator cogs assembly out. Next I just turned the assembly upside down, slipped the plastic ring off that holds the cogs in place, and put the new cogs in place of the old ones. Reassembly was just as easy. The job took about 15 minutes, and once everything was back together the agitator worked like it was brand new.
Read less
Was this helpful?
Thank you for voting!
agitator was making a large amount of noise
2 of 2 people
found this instruction helpful.
-
Timothy from Kansas City, MD
- Easy
- 15 - 30 mins
-
Socket set
After the wife held the phone to the washer so I could hear the horrendous noise it was making. And I screaming at her "shut it off, shut it off!' I came home and took the agitator apart, and found the directional dogs worn out. Went to the computer and easily ordered new parts, which came very quickly. I took off the agitator with a long
... Read more
extension and socket, put in the new dogs and reversed for installation. Told the wife get back to doing the laundry!
Read less
Was this helpful?
Thank you for voting!
Top half of agitator would not agitate.
2 of 2 people
found this instruction helpful.
-
Chris from Kernersville, NC
- Really Easy
- Less than 15 mins
-
Pliers
Removed top cap of agitator and pulled out the inner cap. Spread a pair of needle nose pliers and placed them in square holes on each side of nylon fitting. Unscrewed nylon fitting and removed top half of agitator. Replaced directional cogs/dog ears and put agitater back together. Works like new. Easy fix.
PS Received parts i ... Read more n 72 hours. $10.00 bucks and never left the house.
PS Received parts i ... Read more n 72 hours. $10.00 bucks and never left the house.
Read less
Was this helpful?
Thank you for voting!
Water drained but would not spin.
2 of 2 people
found this instruction helpful.
-
Ramona from MESA, AZ
- Very Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Just watched the video. Take from a 63 year old. Who never fixed a washer. Thx a lot for the video it saved me a lot of money being on a fix income. and it was less than $ 10 that was included shipping.
Was this helpful?
Thank you for voting!
would not spin
2 of 2 people
found this instruction helpful.
-
John from INDIANAPOLIS, IN
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers, Socket set
online videos were great. called to order and lady was very helpful. washer is now operating normal
Was this helpful?
Thank you for voting!
Washer not agitating
2 of 2 people
found this instruction helpful.
-
Dianne from WALES, MI
- Very Easy
- Less than 15 mins
-
Socket set
Washer was not agitating. My husband did not have a clue what to look for, but he took it apart and noticed two of the four directional cogs were stripped. Did an internet search and found the part on your website and thought we would give it a try since the part/shipping was under $20. The parts came in three days and my washer lives
... Read more
on. Was ready to get a new one since it is 18 years old, but I will not wait. Excellent website with all instructions and parts breakdown of the washer.
Read less
Was this helpful?
Thank you for voting!
Agitator not moving
2 of 2 people
found this instruction helpful.
-
Kevin from ALBUQUERQUE, NM
- Very Easy
- Less than 15 mins
-
Socket set
Half inch extension. Removed plastic set piece. Remove agitator cap. Remove ring remove worn cogs. Replaced new cogs Replace lock ring, back together. 10 minutes
Was this helpful?
Thank you for voting!
Agitator cogs all broken
2 of 2 people
found this instruction helpful.
-
Kelly from AMARILLO, TX
- Very Easy
- Less than 15 mins
-
Socket set
Removed Softner dispenser and cap. With a 3/8" socket wrench and extension And 7/16" socket I took out the screw holding the agitator and removed top section of agitator. Turned upside down and removed the rubber grommet that holds the cogs in place. Replaced cogs and reinstalled grommet. Aligned top part of agitator with 2 tabs and put b
... Read more
ack in place and secured with 7/16" screw. Replaced cap And dispenser. Good to go. Works perfectly. Very easy repair.
Read less
Was this helpful?
Thank you for voting!
Found seal had split on agitator cap
3 of 5 people
found this instruction helpful.
-
Kim from Cleveland, OH
- Really Easy
- Less than 15 mins
I clean out the fabric softner dispenser on my machine on a regular basis and found the seal split. After looking at several sites to try and find this part, I found this one. Ordering couldn't have been easier and repair only required pulling up the cup for the softner and installing the cap.
Thanks for making finding part ... Read more so easy . . . .
Thanks for making finding part ... Read more so easy . . . .
Read less
Was this helpful?
Thank you for voting!
Replaced the dog ears.
2 of 2 people
found this instruction helpful.
-
Todd from Milwaukee, WI
- Easy
- Less than 15 mins
-
Screw drivers, Socket set
It was easy, take off the cap, then loosen the nut. Take it apart, change the dog ears, put back together. It was done.
Was this helpful?
Thank you for voting!
Washer would not adgitate
2 of 2 people
found this instruction helpful.
-
Joe from SAN JOSE, CA
- Very Easy
- Less than 15 mins
-
Nutdriver
I ordered a lid switch because the washer wouldn't agitate. Most reviews indicated that was the problem. While waiting for the part to arrive, I discovered the transmission to be of fault.I let parts select know that I no longer needed the part. Parts Select gave me an immediate refund no questions asked and before I returned the part to
... Read more
them. That is customer service!! I will use Parts Select for all my future purchases. I can trust a company that trusts its customers.
Joe M. San Jose
Joe M. San Jose
Read less
Was this helpful?
Thank you for voting!
Not really a problem but the hardest part was moving the washer to lay on its back.
2 of 2 people
found this instruction helpful.
-
John from WHITEWATER, CA
- Really Easy
- 1- 2 hours
-
Nutdriver, Pliers, Socket set, Wrench (Adjustable)
I simply followed Steve's instructions on video. Very easy repair. Washer works great, no jumping or vibrating.
Was this helpful?
Thank you for voting!