Maytag Dishwasher Dishracks
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Maytag Dishwasher Dishracks
Your Price
$55.91
Dishwasher Upper Rack Adjuster
PartSelect Number PS11756150
Manufacturer Part Number WPW10546503
This OEM Dishwasher Upper Rack Adjuster is a grayish-black, plastic part which will require a screwdriver to install. It fits onto the dishwasher rack and connects it to the track allowing it to slide in and out. If broken then the rack will no longer slide properly, and the part must be replaced. The installation has been rated as "easy" by customers. Before beginning any repair, you should unplug the dishwasher and wear gloves to protect your hands. Check your model number and user manual to see if this part is right for you! Your dishwasher should have a left and right upper rack adjuster, and both are the same part. These parts are sold individually, so if you are looking to replace both, you will need to order two parts.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Leaking
- See more...
Rack Track Stop
PartSelect Number PS11746591
Manufacturer Part Number WP8565925
The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack stop may need to be replaced. The replacement part may differ slightly from the broken part, depending on the model. However, the different styles are interchangeable. This product is sold individually and comes in both a white and grey plastic version. Many of our customers found this repair to be very easy and takes less than 30 minutes to complete. Simply snap the old part out and snap the new part into place. You will not require any tools to complete the job. This is an authentic part approved by the manufacturer.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Not cleaning dishes properly
- See more...
Tine Pivot
PartSelect Number PS11748190
Manufacturer Part Number WPW10082853
The tine pivot clip, also known as the tine row pivot, is used in dishwashers and is located in the upper dishrack. At around 3 inches in length, the clip is used to keep the tine row in place in the dishrack. If your clip is cracked or damaged, it is best to replace this part. To repair, first lift the release tab and hold the other side to prevent it from falling off. After lifting it off, you can set the new clip on the tine row and lock it up. Refer to the manual provided by the manufacturer for further installation instructions and guidance. Remember to wear work gloves as a safety precaution. This repair was rated as very easy by our customers and should be done in 15 minutes or less.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Dishwasher Positioner
PartSelect Number PS11750093
Manufacturer Part Number WPW10195840
Also known as rack adjuster. Sold individually.
This is an original part from KitchenAid, Kenmore, Whirlpool, Jenn-Air, and Maytag for use with Dishwashers. The dishrack adjuster arm positioner clip holds the adjuster arm in the right position on the dishrack. The most common reason for replacing the strap is if the rack will not stay in its desired position. This part is sold individually. There are no tools needed to replace the positioner.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Not cleaning dishes properly
- See more...
Your Price
$91.55
Dishwasher Dish Rack Slide Track - Right Side
PartSelect Number PS12584377
Manufacturer Part Number W11259786
Fixes these symptoms
- Door latch failure
- Door won’t close
- See more...
Your Price
$107.44
Dishwasher Dish Rack Slide Track - Left Side
PartSelect Number PS12584376
Manufacturer Part Number W11259785
Fixes these symptoms
- Door latch failure
- Door won’t close
- Noisy
- See more...
Drawer Track
PartSelect Number PS11750072
Manufacturer Part Number WPW10195623
This drawer track or rack slider bar is for use in your dishwasher. It connects to the upper dish rack, and allows the rack top slide in and out. You may need to replace this part if your old rack will not slide out, or your old drawer track is warped and causes the dish rack wheels to fall off or jam. You will need a flat blade screwdriver to remove the rear stop, so you can pull out the drawer track.
Fixes these symptoms
- Door latch failure
- Door won’t close
- See more...
Dishwasher Dishrack Adjuster
PartSelect Number PS11750092
Manufacturer Part Number WPW10195839
Sold individually.
This dishrack adjuster is for dishwashers.
Dishrack adjuster lets you change the height of the dishwasher's upper rack.
Wear work gloves to protect your hands when installing this part.
Fixes these symptoms
- Door latch failure
- Door won’t close
- See more...
Your Price
$10.20
Adjuster Housing Cover
PartSelect Number PS11751101
Manufacturer Part Number WPW10250162
The adjuster cover goes on the outside of the adjuster housing. It is used to support the height adjuster and also protects the internal components of the adjuster housing.
Fixes these symptoms
- Door won’t close
- See more...
Related Parts
- All Maytag Dishwasher parts
- Maytag Dishwasher Brackets and Flanges
- Maytag Dishwasher Caps and Lids
- Maytag Dishwasher Circuit Boards and Touch Pads
- Maytag Dishwasher Dispensers
- Maytag Dishwasher Ducts and Vents
- Maytag Dishwasher Handles
- Maytag Dishwasher Hardware
- Maytag Dishwasher Hinges
- Maytag Dishwasher Hoses and Tubes
- Maytag Dishwasher Latches
- Maytag Dishwasher Motors
- Maytag Dishwasher Panels
- Maytag Dishwasher Pumps
- Maytag Dishwasher Racks
- Maytag Dishwasher Seals and Gaskets
- Maytag Dishwasher Spray Arms
- Maytag Dishwasher Springs and Shock Absorbers
- Maytag Dishwasher Switches
- Maytag Dishwasher Wheels and Rollers