My Orders
Magic Chef Range Elements and Burners
GET YOUR OFFICIAL Magic Chef PARTS TO ENSURE VICTORY
Popular Magic Chef Range Elements and Burners
This Whirlpool OEM 2400-watt bake element has push-on terminals and is located on the bottom of the oven cavity. The bake element supplies heat while baking. If the oven is not heating properly the bake element may have burned out. If the element has burned out there would be visible damage such as holes, cracks, or blisters. When replacing the element, do not allow the wires to fall back through the rear of the oven. Disconnect the power to the range before starting your repair.
This Whirlpool OEM 2400-watt bake element has push-on terminals and is located on the bottom of the oven cavity. The bake element supplies heat while baking. If the oven is not heating properly the bake element may have burned out. If the element has burned out there would be visible damage such as holes, cracks, or blisters. When replacing the element, do not allow the wires to fall back through the rear of the oven. Disconnect the power to the range before starting your repair.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Oven is too hot
This bake element has push-on terminal ends.
NOTE: This element has been updated by the manufacturer. New installation screws are required. Screws are sold separately.
This bake element has push-on terminal ends.
NOTE: This element has been updated by the manufacturer. New installation screws are required. Screws are sold separately.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Oven is too hot
This bake element is found on the bottom of the oven. his bake element is for ranges.
The bake element is at the bottom of the oven and supplies the heat for baking.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
This bake element is found on the bottom of the oven. his bake element is for ranges.
The bake element is at the bottom of the oven and supplies the heat for baking.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Oven not heating evenly
This spade style bake element with push on wire terminals is 16 inches wide. It has a terminal depth of three inches and a total element length of nineteen inches. This element comes with an instructions sheet and is intended for use with electric ovens.
This spade style bake element with push on wire terminals is 16 inches wide. It has a terminal depth of three inches and a total element length of nineteen inches. This element comes with an instructions sheet and is intended for use with electric ovens.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Oven is too hot
NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.
NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
The manufacturer suggests replacing the receptacle at the same time.
The manufacturer suggests replacing the receptacle at the same time.
This broil element is a genuine replacement component located at the top of the oven cavity, designed to supply direct heat for broiling and high-temperature cooking. Engineered for select range models, it converts electrical energy into radiant heat, ensuring efficient and consistent cooking performance. A faulty broil element may result in insufficient heat, uneven cooking, or extended cook times. Installation requires disconnecting the appliance from the power source or circuit breaker, and safety precautions such as wearing gloves are recommended. A Phillips screwdriver is typically sufficient for the repair. Always consult the manufacturer’s manual and verify model compatibility before purchase.
This broil element is a genuine replacement component located at the top of the oven cavity, designed to supply direct heat for broiling and high-temperature cooking. Engineered for select range models, it converts electrical energy into radiant heat, ensuring efficient and consistent cooking performance. A faulty broil element may result in insufficient heat, uneven cooking, or extended cook times. Installation requires disconnecting the appliance from the power source or circuit breaker, and safety precautions such as wearing gloves are recommended. A Phillips screwdriver is typically sufficient for the repair. Always consult the manufacturer’s manual and verify model compatibility before purchase.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Little to no heat when broiling
This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and heats up the area directly above it. You will need to replace the element if it does not heat up properly. As you will be working around electricity, be sure that your range is disconnected from power before you begin this repair. This is an OEM part sourced directly from the manufacturer.
This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and heats up the area directly above it. You will need to replace the element if it does not heat up properly. As you will be working around electricity, be sure that your range is disconnected from power before you begin this repair. This is an OEM part sourced directly from the manufacturer.
This element has looped terminal ends and 5-turns. This element features pigtail, looped ends. This element is 8" in diameter. This element is 2100 watts. This element coil has 5 turns. This surface element has a black centre medallion. The coil surface element supplies the heat to a cooking area on top of the range.
This element has looped terminal ends and 5-turns. This element features pigtail, looped ends. This element is 8" in diameter. This element is 2100 watts. This element coil has 5 turns. This surface element has a black centre medallion. The coil surface element supplies the heat to a cooking area on top of the range.
This oven bake element with push-on terminals has a terminal depth of three inches, making a total element length of nineteen inches.
This oven bake element with push-on terminals has a terminal depth of three inches, making a total element length of nineteen inches.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Oven is too hot