Kenmore Washer Switches

Videos!

Your Price

$58.27

Kenmore Washer Lid Switch

★★★★★

22 Reviews

PartSelect Number PS11745957

Manufacturer Part Number WP8318084

The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the grounding wire.

Fixes these symptoms

Burning smell
Cycle Not Advancing
Lid or door won’t close
See more...

Videos!

Your Price

$56.93

Kenmore Washer Lid Switch Assembly

★★★★★

52 Reviews

PartSelect Number PS11742021

Manufacturer Part Number WP3949238

This part comes with a three-wire lead. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.

Fixes these symptoms

Cycle Not Advancing
Lid or door won’t close
Spinning Issues
See more...

Videos!

Your Price

$56.60

Kenmore Washer Lid Switch Assembly With Leads

★★★★★

58 Reviews

PartSelect Number PS350434

Manufacturer Part Number 3949247

This switch (Lid Switch Assembly With Leads, Washer Lid Switch, Lid Switch Assembly, Washer Lid Switch) tells the washing machine that the lid is closed, which allows the wash cycle to begin. The lid switch mounts to the underside of the cabinet top panel. The plastic on the actuator can become brittle with age and break when the lid is closed roughly. It can also break from the movement of an unbalanced load causing parts of the washer to strike it. This part must be replaced if it is broken and no longer being activated by closing the lid (indicated by the washer not agitating properly, or the machine not detecting the lid is closed). This switch is black plastic with wire leads. It is sold individually.

Fixes these symptoms

Cycle Not Advancing
Lid or door won’t close
Not draining
See more...

Your Price

$70.38

Kenmore Washer Water Level Switch

★★★★★

10 Reviews

PartSelect Number PS11754877

Manufacturer Part Number WPW10448876

This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.

Fixes these symptoms

Cycle Not Advancing
Draining Issues
Water Filling Issues
See more...

Videos!

Your Price

$205.79

Kenmore Washer Switch Assembly

PartSelect Number PS7792232

Manufacturer Part Number EBF61315802

This door lock switch is a key component in compatible washing machines, designed to signal the control board when the door is securely closed. Once engaged, it enables the locking mechanism and allows the wash cycle to begin safely. Constructed from black, gray, and white plastic, this switch may need replacement if your washer struggles to start or fails to lock properly. Installation requires partial disassembly of the appliance and basic tools including a screwdriver, drill, and needle-nose pliers. Sold individually.

Fixes these symptoms

Lid or door won’t close
Locking Issues
Will Not Start
See more...

Videos!

Your Price

$30.03

Kenmore Washer Lid Switch

★★★★★

7 Reviews

PartSelect Number PS11723153

Manufacturer Part Number W10820036

Keep your washer or dryer running safely with this easy-to-install lid or door switch kit. It stops the machine from working when the door is open, helping prevent spills and accidents. Compatible with many models, this small but important part fits neatly inside your appliance and comes with everything you need for installation. Just unplug your machine, swap out the old switch, and you're good to go. It’s about 2.5 inches long and blends in with most interiors.

Fixes these symptoms

Will not agitate
Will not drain
Will Not Start
See more...

Your Price

$80.13

Kenmore Washer Switch Assembly Sensor

★★★★★

3 Reviews

PartSelect Number PS3529177

Manufacturer Part Number 6501EA1001R

Fixes these symptoms

Water Filling Issues
Will Not Start
See more...

Your Price

$56.99

Kenmore Washer Lid Switch Assembly

★★★★★

12 Reviews

PartSelect Number PS334600

Manufacturer Part Number 285671

If your washer won’t start, spin, or drain, the lid switch might be the problem. This part makes sure the lid is closed before the machine runs. It’s a simple safety feature that keeps everything working smoothly. Just unplug your washer before installing, and check that it fits your model.

Fixes these symptoms

Cycle Not Advancing
Spinning Issues
Will not agitate
See more...

Your Price

$87.50

Kenmore Washer Pressure Switch Assembly

PartSelect Number PS3529317

Manufacturer Part Number 6601ER1006E

Is your LG washing machine acting up? Our LG Washer Water Level Sensor Pressure Switch may be just what you need. This top-notch replacement part is specifically designed for certain LG models and functions as a lifesaver when it comes to controlling water levels. Optimum water use during every wash is crucial?it ensures proper operation and unmatched performance. Turning off your washer and your water supply before getting started with the replacement is a wise move?it?s all about your safety first. Also, wearing work gloves isn't a bad idea. Take note though, make sure this part is the right fit for your specific washer model before you go ahead with the purchase. Let's get your laundry days back on track without a hitch!

Fixes these symptoms