Kenmore Dishwasher Valves
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Kenmore Dishwasher Valves
Kenmore Dishwasher Water Inlet Valve - 120v 60hz
PartSelect Number PS1990907
Manufacturer Part Number 154637401
This dishwasher water inlet valve is a genuine OEM component designed to regulate water flow into the appliance during the fill cycle. Typically located behind the lower kickplate panel in either front corner, the valve uses solenoids to open and close, ensuring the correct amount of water enters the tub for effective cleaning. Operating at 120 volts and 60 Hz, this part is essential for maintaining proper dishwasher performance. Common symptoms of a faulty valve include leaking, failure to fill, poor cleaning results, or incomplete draining. Installation requires disconnecting power and water supply, and a flat blade screwdriver may be needed to access the valve. Always verify model compatibility before purchase.
Fixes these symptoms
- Leaking
- Noisy
- Not cleaning dishes properly
- See more...
Kenmore Dishwasher Inlet Valve
PartSelect Number PS12578165
Manufacturer Part Number W11175771
This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
Fixes these symptoms
- Leaking
- Noisy
- Not cleaning dishes properly
- See more...
Your Price
$76.28
Kenmore Dishwasher Water Inlet Valve
PartSelect Number PS16217908
Manufacturer Part Number W11434044
The water inlet valve assembly (part number W11434044) supplies water to the dishwasher. It includes the valve, inlet hose, and hose clamp.
Fixes these symptoms
- Leaking
- Will not fill with water
- See more...
Kenmore Dishwasher Water Inlet Valve
PartSelect Number PS11752927
Manufacturer Part Number WPW10327249
This water inlet valve controls the flow of water into your dishwasher, ensuring each cycle begins with the correct amount of water. If your appliance is leaking, overfilling, or not filling at all, a faulty valve may be the cause. Designed for compatibility with a variety of models, this replacement part helps restore efficient and reliable operation. To ensure a proper fit, always confirm your dishwasher’s model number before ordering. For safety, disconnect the appliance from its power source and wear protective gloves before installation.
Fixes these symptoms
- Leaking
- Noisy
- Not cleaning dishes properly
- See more...
Your Price
$89.97
Kenmore Dishwasher Water Valve
PartSelect Number PS8728724
Manufacturer Part Number 00622058
This dishwasher water inlet valve is a genuine replacement component engineered to regulate water flow into the appliance, ensuring accurate fill levels for optimal cleaning performance. Constructed to meet strict quality standards, it is compatible with select models from Bosch, Thermador, and Gaggenau. A malfunctioning valve may result in the dishwasher failing to fill, underfilling, or leaking. Installation requires disconnecting power and water supply, and wearing protective gloves is recommended for safety. Prior to purchase, model compatibility should be verified to ensure proper fit and function.
Fixes these symptoms
- Leaking
- Not cleaning dishes properly
- Not draining
- See more...
Kenmore Dishwasher Water Inlet Valve
PartSelect Number PS11749213
Manufacturer Part Number WPW10158389
If your dishwasher isn’t filling with water or is leaking, the water inlet valve might be the problem. This part controls how much water flows into the machine during each cycle, helping it clean properly without overfilling. It opens and closes automatically to let in just the right amount. Replacing a worn valve can fix issues like poor washing, leaks, or no water at all.
Fixes these symptoms
- Leaking
- Noisy
- Not cleaning dishes properly
- See more...
Your Price
$79.50
Kenmore Dishwasher Water Inlet
PartSelect Number PS16620155
Manufacturer Part Number W11535094
Is your dishwasher not performing like it used to? It may be the water inlet assembly that needs replacing. We offer you the OEM Water Inlet Assembly direct from Whirlpool, a brand trusted for its high-quality appliances and their parts. This integral element channels clean water into your dishwasher tub, improving its efficiency and helping it run as smoothly as the day you bought it. Safety is vital, so before attempting the easy installation process, ensure your dishwasher is unplugged or the household circuit breaker is turned off. We recommend using work gloves to protect your hands. It's always crucial to check if this water inlet assembly is compatible with your dishwasher model. By ensuring this, you're taking a step towards restoring your appliance's optimal operation. With this Whirlpool part, you can get back to enjoying clean dishes with the performance you're used to.
Fixes these symptoms
- Leaking
- Not draining
- Will not fill with water
- See more...
Kenmore Dishwasher Water Inlet Valve
PartSelect Number PS8760080
Manufacturer Part Number W10648041
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
Fixes these symptoms
- Leaking
- Noisy
- Not cleaning dishes properly
- See more...
Kenmore Dishwasher Water Inlet Valve
PartSelect Number PS11730996
Manufacturer Part Number W10844024
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed. NOTE: As per the manufacture this part has been updated from the original part. It may be a different color, and you may need to order an elbow (# W10685193) for the new designed valve to work.
Fixes these symptoms
- Leaking
- Not cleaning dishes properly
- Not draining
- See more...
Your Price
$79.51
Kenmore Dishwasher Water Inlet Valve
PartSelect Number PS9865067
Manufacturer Part Number 807047901
This water inlet valve is for dishwashers.
Water inlet valve supplies water to the dishwasher.
Unplug the dishwasher and shut off the water supply before installing this part
Fixes these symptoms
- Leaking
- Not cleaning dishes properly
- Will not fill with water
- See more...
Related Kenmore Dishwasher Parts
- All Kenmore Dishwasher parts
- Kenmore Dishwasher Bearings
- Kenmore Dishwasher Brackets and Flanges
- Kenmore Dishwasher Caps and Lids
- Kenmore Dishwasher Circuit Boards and Touch Pads
- Kenmore Dishwasher Dishracks
- Kenmore Dishwasher Dispensers
- Kenmore Dishwasher Doors
- Kenmore Dishwasher Drums and Tubs
- Kenmore Dishwasher Ducts and Vents
- Kenmore Dishwasher Elements and Burners
- Kenmore Dishwasher Filters
- Kenmore Dishwasher Fuses
- Kenmore Dishwasher Grilles and Kickplates
- Kenmore Dishwasher Handles
- Kenmore Dishwasher Hardware
- Kenmore Dishwasher Hinges
- Kenmore Dishwasher Hoses and Tubes
- Kenmore Dishwasher Insulations
- Kenmore Dishwasher Knobs
- Kenmore Dishwasher Latches
- Kenmore Dishwasher Legs and Feet
- Kenmore Dishwasher Manuals and Literatures
- Kenmore Dishwasher Motors
- Kenmore Dishwasher Panels
- Kenmore Dishwasher Power Cords
- Kenmore Dishwasher Pumps
- Kenmore Dishwasher Racks
- Kenmore Dishwasher Seals and Gaskets
- Kenmore Dishwasher Sensors
- Kenmore Dishwasher Spray Arms
- Kenmore Dishwasher Springs and Shock Absorbers
- Kenmore Dishwasher Switches
- Kenmore Dishwasher Thermostats
- Kenmore Dishwasher Timers
- Kenmore Dishwasher Trims
- Kenmore Dishwasher Wheels and Rollers
- Kenmore Dishwasher Wire Plugs and Connectors