Part Location Diagram of W10844024 Whirlpool Water Inlet Valve
See part 16 in the diagram
Replacing your Whirlpool Dishwasher Water Inlet Valve
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Water Inlet Valve

★★★★★
★★★★★
10 Reviews
$73.11
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11730996
Manufacturer Part Number W10844024
Manufactured by Whirlpool
Product Description

Water Inlet Valve Specifications

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed. NOTE: As per the manufacture this part has been updated from the original part. It may be a different color, and you may need to order an elbow (# W10685193) for the new designed valve to work.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Whirlpool Dishwasher Water Inlet Valve

Replacing your Whirlpool Dishwasher Water Inlet Valve
Troubleshooting
This part fixes the following symptoms:
Will not fill with water | Leaking | Not cleaning dishes properly | Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Estate.
Part# W10844024 replaces these:
AP5989613, 3378779, 3379356, 3384890, 8274221, 8283345, 8283346, 9743175, 9743559, 9744029, 9744284, 9744468, W10219643, W10327248, W10844024VP, WP9744468, WPW10219643
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.9
Filter By Rating:
  • 5 Stars
    9
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 12 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Water in bottom of dishwasher
Disconnected power. Shut off water supply. Took off the front, disconnected copper supply line and flexible water line, removed water inlet valve. Took elbow from old inlet valve and put in on new one. Put new valve in, reconnected water lines, put back front panel. Opened water supply, Flipped breaker back on. Done and it worked!
Other Parts Used:
Single Hex Head Screw
  • Chris from Pompano Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
64 of 457 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inlet valve was leaking from crack in brass fitting
Removed the lower panels from beneath the dishwasher door. 4 screws. Turned off the water.

Removed one screw holding the inlet valve to the side rail of the dishwasher. It was attached to the hot water line and then the washer water input line. Removed the electrical connector..Pull straight off, and use a pair of pliers to open the squeeze clamp on the washer hose. The hot water supply hose has a brass fitting to loosen and remove.

Replaced the inlet valve, reconnected the electrical and also replaced the hot water line from under the sink to the washer. Used a new braided 5' hose with fittings. Used teflon tape on the screws and did not over tighten the brass fittings.

Turned on the hot water supply and checked for leaks. Operated the washer and checked for leaks. Replaced the lower covers.
Other Parts Used:
  • David from Lexington, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
39 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher wouldn't fill
I thought that the valve inlet was defective. Ordered the replacement, got it in one day, replaced the part...
and it worked perfectly. Saved big $$ in a service call. Found everything I needed online.
Other Parts Used:
  • Arnie from Michigan City, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
36 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher would not fill with water.
After doing some research in a repair book I decided to take a stab with a water inlet valve. With expedited shipping I ordered the part and within three days it was delivered. I installed it and the dishwasher seemed like it was trying to fill but still would not. After much cocnsternation I turned the water supply valve to the dishwasher a partial turn to close and I felt the water rush through the valve and the dishwasher then filled. Apparently the shut off valve must have been clogged plus it now leaked. I then replaced the shutoff valve and the copper pipe to the water inlet valve with flexible 3/8" tubing and the dishwasher thus far is running fine without leaks.
Other Parts Used:
  • Robert from Waldoboro, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench (Adjustable)
19 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Valve was leaking from plastic after water line change
Turned of water and unplugged the dishwasher.
Disconnected the incoming water line.
Drained on to the floor (have paper towels ready)
Disconnected the electrical feed wire.
Disconnected the rubber hose.
Unscrewed screw holding the fixture to the frame.
Took off the brass elbow from the old part.
Put pipedope around it and screwed into new part (carefully, so as to not crack plastic again).
Attached part back to frame.
Attached water lines.
Turned on water, plugged it in and ran dishwasher looking for leaks. No problem.
Other Parts Used:
  • Nathaniel from Chelsea, MA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
17 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
inlet valve cracked
I first removed the old part. when i removed the old part i could not get the conector piece off when i when to get a new one they told me i should replace the copper tubing with the more flexable tubing because the copper tubing can kink up and possibly break from the kinking. so i screwed the inlet valve on i put teflon tape on the all the threads of the conector piece screwed it into the new inlet valve with and adjustable wrench then i conected the new tubing, and tightend it down with the wrench i slowly turned the water back on to cheak for leaks. When i saw there were no leaks i turned the water on the rest of the way pushed the dishwasher back in and screwed it into place an i was done.
Other Parts Used:
  • Victoria from Clarksville, TN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set, Wrench (Adjustable)
12 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water coming into dishwasher
I unscrewed the old water inlet valve from the frame of the dishwasher so that I could manuever my hand around to the backside where the rubber hose was connected. That was the easy part. I then had trouble holding the old valve while trying to unscrew the hot water copper tubing so I screwed it back on the frame. My dishwasher is close to 18 years old and I think that was part of the problem. After soaking in WD40, I finally got the valve out. Then I had to remove the "L" shaped connector to put on the new valve. Everything went back together a lot faster and it's like I have a new dishwasher again. By the way, I am a 53 year old female so that may be why it took me so long.
Other Parts Used:
  • Terry from Wharton, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Wrench set
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old valve failed and started to leak.
Pulled off the old valve using a crescent wrench and screw driver. The replacement part was a 100% exact match. Slapped on the new valve and that baby was water tight. $50 on a new valve is a lot better than $500 for a new washer.

Partselect.com was so easy to use and find the right part. Way more helpful than whirlpool's site, but that's not surprising seeing as they have an "authorized repair technician" page.

Thanks Partselect.com!
Other Parts Used:
  • Adam from Minneapolis, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
8 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water won't fill for washer to start.
Determined the problem to be the water inlet valve. Researched the Part Number per Google and Whirlpool Customer Service. Part Number W10844024 with connector recommend by video. I used U Tube video for PN W10844024 by this site to show me to the repair. It was excellent.
Other Parts Used:
Elbow Hose Fitting
  • Larry from VANCOUVER, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad Water Inlet Valve
No Water supply to Dishwasher. Turned off main Supply valve under sink.First took off old Diswasher supply valve and repaired it by cleaning it and it worked for two weeks. I ordered the part, but then cancelled it and Partselect service was great and cancelled it immediately. After it went down after 2 weeks I re-ordered it and it came in 4 days.
To Take this part off I removed mounting scews with nut driver, disconeected electronic plug connector, removed the compression fitting from the water supply and removed the outlet hose..reversed all of the above to install.
Other Parts Used:
  • Stephen from Park Ridge, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable), Wrench set
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

11 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Darrell
August 16, 2021
My unit is not filling, i have checked the input water to the water inlet valve and have sufficient water pressure. I removed the the valve and disassembled and found the inlet filter clogged with calcium deposits. Removed all the calcium deposits blocking the wire mesh filter and disassembled the rest of the valve with no further finding as far as the physical valve goes. I then checked the continuity of the solenoid coil and found its resistance to fluctuate in the meg ohms, i presume that this high resistance is not allowing the coil to properly energize and open the valve.So now my question is, what is the nominal resistance of the coil on a new part?? for reference. thank you in advance for your reply.
For model number DU800CWDB5
PartSelect logo
Hi Darrell, Thank you for your question. When you have the multimeter set to the Rx1 setting, the reading for the water inlet valve should be between 100 and 1000 ohms. If the reading is over 1000 ohms, then you will need to replace the water inlet valve. We hope this helps! If you have any questions, please let us know.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Curtis
October 7, 2017
Dishwasher starts, runs for about 2 minutes, then shuts off. Doesn’t appear to be filling with water
For model number KUDS24SEBS3
PartSelect logo
Hi Curtis, Thank you for the question. If the appliance will not fill with water I suggest replacing the Water Inlet Valve. If the valve is defective it will not let water through to fill the tub. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Josh
December 7, 2017
Water runs into dishwasher before cycle even starts continuously
For model number 665.13593K600
PartSelect logo
Hi Josh, Thank you for your question. If your dishwasher is filling with water when it is not on then you will need to check the impeller as it may be worn down. You will also need to check the water inlet valve to see if it is working correctly as well. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Jared
February 1, 2018
My Whirlpool recently stopped filling up with water. It still heats up and drains when i put water in it but still no water and it doesn’t look like the water hole is clogged. I read the inlet valve might need to be changed. If that’s the case to i have to by the extra valve for the updated inlet valves now sold? Any help would be great.
For model number DU810DWGQ2
PartSelect logo
Hello Jared, thank you for your question. It does sound like the issue is the water valve. If no water is coming into the unit you can test the valve to see if its faulty before ordering. I would recommend ordering the Elbow Hose Fitting part number W10685193 just in case. Its hard to tell which models need the fitting and which ones do not. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Sascha
January 16, 2019
How do i know if i need the elbow it mentions?
For model number DU900PCDB6
PartSelect logo
Hello Sascha, thank you for your question. Unfortunately, its hard to determine which unit will need the elbow and which do not. However, we do know that If the valve does not use a standard hose type thread on the valve the adapter is used. Please see our installation video at the following link! I hope this helps! https://www.partselect.com/PS11730996-Whirlpool-W10844024-Water-Inlet-Valve.htm

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ron
January 26, 2023
My 26-year-old KitchenAid dishwasher's original water inlet valve was OEM W10327248. I have replaced it once in the past with no problem; however, it has been replaced by W10844024. The problem is that the line taking the water to the dishwasher is now on the wrong side. (This is the line with the push-on hose and wire clamp.) Is there a way to use this part?
For model number KUDS24SEWH2
PartSelect logo
Hi Ron, Thank you for your question. We have included a link to one of our YouTube videos that you may reference on how to install the water inlet valve. The washer in the video may appear different from yours, but it will give you a general idea on how to install the part. We hope this helps with the repair!

Was this helpful?
Thank you for voting!
Harmon
August 1, 2017
The water is not being pumped out of the dishwasher.Help
For model number RUD4000MQ0
PartSelect logo
Hi Harmon, Thank you for the question. I suggest replacing the Pump and Motor Assembly, Part number PS11751019. This part supplies water to the spray arms and pumps the water out of the dishwasher. Hope this helps!

Was this helpful?
Thank you for voting!
Andrew
May 21, 2023
I am having water pooling in the bottom of the dishwasher after it finishes running. I can hit drain/cancel and it will finish draining the remainder of the water. Additionally, I took the panel off to observe while draining/running and it sprays a fine mist from the middle of dishwasher. Should I bother fixing this thing or just get a new one?
For model number DU960PWKT0
PartSelect logo
Hello Andrew, thank you for your inquiry. Based on the description that you have provided, we would recommend replacing the drain pump, part number PS3500989. Before replacing the pump, make sure the drain hose is properly aligned and the drain filter is clean. We hope this information is useful!

Was this helpful?
Thank you for voting!
Related Parts:
Tim
January 13, 2023
Water inlet valve, I need the outlet part that seats with the o ring and 4 little bolts hold it together I just need that little brass part on the end of the valve
For model number Rud4000mq0
PartSelect logo
Hello Tim, thank you for your question. The Valve PS11730996 only is sold as an assembly. We look forward to hearing from you.

Was this helpful?
Thank you for voting!
Dan
March 1, 2019
My dishwasher whistles after filling at start of cleaning cycle. After a few minutes whistling goes away and washer functions properly
For model number DU943PWKT0
PartSelect logo
Hi Dan, thank you for your question. Usually when you are getting a whining noise in your machine it has to do either with your drain pump or the motor of your appliance. I would suggest taking a look at those two parts first. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
  • 1
  • 2
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11730996
Manufacturer Part Number: W10844024
Brand
Model Number
Description
Kenmore
110723120
Dishwasher
Kenmore
110773811
Dishwasher
Kenmore
110773812
Dishwasher
Kenmore
110773813
Dishwasher
Kenmore
110773881
Dishwasher
Kenmore
110773882
Dishwasher
Kenmore
110773883
Dishwasher
Kenmore
65715755791
Dishwasher - Kenmore Dishwasher Model 657.15755791 (65715755791, 657 15755791) Parts
Kenmore
66513206K902
Dishwasher
Kenmore
66513402K900
Dishwasher
Kenmore
66513402K901
Dishwasher
Kenmore
66513409K900
Dishwasher
Kenmore
66513409K901
Dishwasher
Kenmore
66513442K900
Dishwasher
Kenmore
66513442K901
Dishwasher
Kenmore
66513443K900
Dishwasher
Kenmore
66513443K901
Dishwasher
Kenmore
66513444K900
Dishwasher
Kenmore
66513444K901
Dishwasher
Kenmore
66513449K900
Dishwasher
Kenmore
66513449K901
Dishwasher
Kenmore
66513492K600
Dishwasher
Kenmore
66513499K600
Dishwasher
Kenmore
66513592K600
Dishwasher
Kenmore
66513593K600
Dishwasher
Kenmore
66513594K600
Dishwasher
Kenmore
66513599K600
Dishwasher
Kenmore
66513692K600
Dishwasher
Kenmore
66513699K600
Dishwasher
Kenmore
66513922K010
Dishwasher - Kenmore Dishwasher Model 665.13922K010 (66513922K010, 665 13922K010) Parts
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service