Whirlpool Range Switches

Videos!

Your Price

$74.85

Whirlpool Range Surface Burner Element Switch, Large

★★★★★

47 Reviews

PartSelect Number PS11740783

Manufacturer Part Number WP3149400

This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.

Fixes these symptoms

Element will not heat
Oven is too hot
Oven not heating evenly
See more...

Videos!

Your Price

$111.63

Whirlpool Range Dual Element Control Switch

★★★★★

53 Reviews

PartSelect Number PS11754687

Manufacturer Part Number WPW10434452

If your range’s burner isn’t heating properly or the temperature seems off, this dual element control switch could be the fix. It’s designed to manage heat for dual surface elements and fits a variety of models from Whirlpool and related brands. Whether your burner won’t start or heats unevenly, this part helps restore smooth operation. Just make sure to check your model number before ordering—it’s not a one-size-fits-all part.

Fixes these symptoms

Element will not heat
Oven is too hot
See more...

Videos!

Your Price

$73.53

Whirlpool Range Infinite Control Switch, 6"

★★★★★

10 Reviews

PartSelect Number PS11740785

Manufacturer Part Number WP3149404

If your stove burner won’t heat up, stays on high, or won’t adjust, this switch might be the fix. It controls the heat for 6-inch electric burners and fits many Whirlpool, Maytag, and KitchenAid ranges. Easy to install—just be sure to unplug the appliance or flip the breaker first. Sold individually.

Fixes these symptoms

Element will not heat
Oven is too hot
Will Not Start
See more...

Videos!

Your Price

$72.03

Whirlpool Range Infinite Switch - 8 Inch

★★★★★

17 Reviews

PartSelect Number PS11740775

Manufacturer Part Number WP3148953

This switch helps you control the heat on your stove’s 8-inch burner. If your burner isn’t heating up or won’t adjust properly, this part could be the fix. It works by sending the right amount of power to the burner when you turn the knob. It’s made to fit many models and is easy to install—just unplug your stove first and wear gloves for safety.

Fixes these symptoms

Element will not heat
Oven is too hot
See more...

Your Price

$107.61

Whirlpool Range Infinite Switch

★★★★★

25 Reviews

PartSelect Number PS12114485

Manufacturer Part Number W11129442

This surface burner switch is an essential component for electric ranges, controlling the power and heat level of the left front burner. It regulates the temperature by cycling the burner on and off to maintain the selected heat setting. If the switch is faulty, the burner may not heat properly, may remain stuck at one temperature, or may fail to turn on at all. For installation, first, unplug the range or switch off the circuit breaker to prevent electrical hazards. The control panel must be accessed by removing the back panel or control knobs, depending on the range model. Once the old switch is detached from the wiring harness, the new switch can be installed by reconnecting the wires in the correct configuration and securing it in place. Always wear work gloves to protect your hands.

Fixes these symptoms

Element will not heat
See more...

Videos!

Your Price

$30.03

Whirlpool Range Lid Switch

★★★★★

7 Reviews

PartSelect Number PS11723153

Manufacturer Part Number W10820036

Keep your washer or dryer running safely with this easy-to-install lid or door switch kit. It stops the machine from working when the door is open, helping prevent spills and accidents. Compatible with many models, this small but important part fits neatly inside your appliance and comes with everything you need for installation. Just unplug your machine, swap out the old switch, and you're good to go. It’s about 2.5 inches long and blends in with most interiors.

Fixes these symptoms

Will not agitate
Will not drain
Will Not Start
See more...

Videos!

Your Price

$72.43

Whirlpool Range Infinite Burner Switch - 8 Inch

★★★★★

19 Reviews

PartSelect Number PS11744487

Manufacturer Part Number WP7403P239-60

This infinite switch for eight inch range burners is almost three inches long. This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.

Fixes these symptoms

Element will not heat
See more...

Your Price

$215.09

Whirlpool Range Burner Switch - Right Front

★★★★★

4 Reviews

PartSelect Number PS11731368

Manufacturer Part Number W10857622

This dual surface element control switch is a critical component in select electric stoves, ovens, and ranges, responsible for regulating heat output and powering the surface element. It enables users to turn the burner on and off and adjust the temperature for precise cooking control. Typically located behind the front control panel, the switch connects to the wiring harness and interfaces with the surface element. If the burner fails to heat properly, fluctuates in temperature, or remains on when turned off, replacing the control switch may resolve the issue. Installation involves disconnecting power at the circuit breaker or unplugging the appliance, removing the control panel, detaching the faulty switch, and securing the new one in place while reconnecting the wiring to match the original configuration. Once installed, restore power and test the burner to ensure proper operation.

Fixes these symptoms